similar to: Polycom 430 no hangup after SIP BYE, Status 481 instead

Hi List; Can someone advise me if Polycom support H323 that work fine with Asterisk? And wether this H323 Polcyom devices more costly than SIP Polycom. Also, I am not able to know if new Polycom come with PoE adaptor so no need for PoE Switch (can use normal switch that does not support PoE)? Do I need any special cable for Polycom or normal Ethernet cable? Regards Bilal

Hello all, We have an Asterisk server that has worked without issue for a while. Before, only Sipura and Polycom 500 series phones were used. Recently, we've added a few POE switches and 20 or so Polycom 330's. The 330's seem to lock up often. One easy way to do this is by hitting the * key. I looked thru the XML files for dialplan and what not, nothing stood out.

I have a question about DHCP and boot server supporting more than 1 model of Polycom phones. According to Polycom "standards", Polycom phone boots up to get a DHCP address and at the same time getting a boot server string (with username and password) to logon to boot server to download SIP, bootROM and etc. That is okay if there is only one type of phone (that requires a specific SIP

I need to provide a 80 people office with VOIP. I want to commit to one vendor Polycom or Aastra. Price of the phones is not a factor in the decision. The quality of the phones is the factor. Some of the features that I am evaluating on are: (arranged in order of priority) 1. Sound quality 2. complete product line with conference phone and receptionist phone (not on Aastra) 3. cordless (not on

Hello everyone, Please forgive the exclamation points but I have been battling this one off and on for about four days now. Sorry for the cross post. It all started with a box of IP 501s. I contacted my reseller and obtained the latest BootRom and SIP firmware. Unzipped, configured, copied over to my FTP server (running AstLinux, of course). The phone booted, so far so good. Updated

Hi All, We are in search of the latest Polycom firmware SIP 1.6.5 and BootROM 3.1.3as per http://www.polycom.com/resource_center/1,,pw-492,00.html Can someone help? We have legitimately obtained these phones but even our official distributor can't get their hands on updated firmware. The only thing we have found is http://www.freedomphones.net/polycom/files/?M=A which has only old versions.

Docs? Polycom has docs? Where would one find this fabled land of... err I mean Polycom does stating what ftp servers are supported? Doug. -----Original Message----- From: Ken D'Ambrosio [mailto:ken@jots.org] Sent: Tuesday, March 07, 2006 12:12 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re:

PBX: Asterisk 1.4 Phones: PSTN phone connected to TDM400 X-Ten Lite Polycom 430 Scenario Polycom 430 = User1 User2 calls User1(Polycom 430) asks to be transfered to User3 User1 does an attended transfer using the trnsfr button on the polycom User2 is placed in music-on-hold User3s phone rings. (So far so good Right?) User3 picks up the phone to answer User2 only to

I'm having a problem with the callerID that the polycom IP600 phones are displaying. I would like to modify the CIDName and leave CIDNumber as exactly what the phone call came in as(provided they aren't hiding callerID). Most of the calls will be going to the queue, but a few will go directly to the SIP phones. I've done a various combinations of using SetCallerID(),

I'm setting up a new Asterisk system on a Dell server and I'm getting "fuzzy" voice between the Polycom IP SoundStation 550 and the Asterisk server. I've checked all of my codec settings and both the Asterisk and the Polycom agree on u-Law encoding. I'm using the latest release of the Asterisk code (1.4.17) and other software. If I call between phones (i.e. two

Hi all, I have a Polycom Soundpoint IP 600 that looks like it is fried. It either has a bad or corrupt bootrom (I'm guessing). It never gets to the prompt that asks if I want to enter the setup configuration or continue booting. When plugged into power, it turns on, shows the Polycom logo for 3 seconds and then pretty much goes dead with two red lights on. The one in the top right corner

I am having the same issue as below. Has this issue been solved or does anyone know an answer? This error recently began and we have multiple phones out of commission. PLEASE HELP!! http://lists.digium.com/pipermail/asterisk-users/2006-August/162841.html How did you find out about 468*??? It's sure as poop not documented in the Polycom Admin Guide anywhere. -----Original Message-----

Hi All, I am a remote office that is connected to my office via openvpn on UDP. Voip has always worked well (after discovering g729). Initially I used a softphone, then an analog set on a sipura 2000, then a polycom IP500 (I still LOVE this phone). At that point, I started noticing that the polycom doesn't ring a lot of the time. Since I was desperate for a phone, I didn't upgrade

We are having an issue that I have been unable to figure out how to resolve. I think its related to the Polycom Phones and not the Asterisk configuration, but I'm not positive. We have several Polycom 500/501/601's on both a LAN and at employee homes. The problem we are having is if our internet connection goes down the Local LAN phones loose their connection to the Asterisk Server.

I'm trying to develop a company phone list accessible via the minibrowser feature on the phone. The pertinent section of ipmid.cfg is as follows: <microbrowser mb.proxy=""> <idleDisplay mb.idleDisplay.home="http://server/polycom/index.html" mb.idleDisplay.refresh="300"/> <main

I am trying to configure a Polycom IP4000 for use with Asterisk 1.4.5 on a flat local network. I followed the provisioning guides that I found on the Web, and I have the phone downloading bootrom.ld, sip.ld, and a bunch of configuration files. This all works properly. However, I receive the following error: NOTICE[27345]: chan_sip.c:14725 handle_request_register: Registration from

I've just got a batch of 301s and 501s in and am trying to get them to work. I'd like to manually configure everything via FTP rather than the web or phone interfaces, but I can't seem to find a good source of definitions for all the options in the sip.cfg or phoneX.cfg files. Anyone know of any? Also, I'm having quite the problem getting the Polycom SP 501 to send *any*

Has anyone been able to get the minibrowser on the Polycom SoundPoint IP 500/600 phones working? If so could you share the relevant sections of your config with me?

With my thanks to Brian West and his offering in the thread, "Subject: Re: [Asterisk-Users] Remote reload Cisco 7960" I offer PolyReboot.pl, a perl script for rebooting Polycom IP Phones PolyReboot.pl takes an IP address as a single argument and reboots the phone. You must have a cfg file in the Polycom style, i.e., 00ab00cd00ef.cfg - all lower case. Further, you need to use ftp for

Hello all, I need the bootrom.ld file to set up some Polycoms I have Platform: Model=SoundPoint IP 330, Assembly=2345-12200-001 Rev=A I've publiched on my FTP files downloaded from http://support.polycom.com/PolycomService/support/us/support/voice/soundpoint_ip/soundpoint_ip330_320.html (3.2.3 combined and split zips) but my phones are still showing the message: "error, application is