similar to: No incoming audio on Dahdi channels (TDM410P)

Is it possible the cpu(s) are being taxed? If they are under heavy load (from another domain most likely) it may cause the domain to not respond to interrupts in a timely manner. If this is the case, you might try changing the scheduling weights of your domains (search the list). _____ From: xen-users-bounces@lists.xensource.com [mailto:xen-users-bounces@lists.xensource.com] On Behalf Of

Hi I have come across a problem, with my tdp410 and soekris board (basically pc on a chip amd geode cpu). I am using the box as a firewall/asterisk box. The problem occurs when I drop ppp and I get dead loop dectiotn going, I seem to lose interrupts and get lots of messages in syslog from wctdm24xx saying missed interrupt increasing latency its out lined here

Hi All, We have a xen server and using 8 core processor. I can see that there is 99% iowait on only core 0. 02:28:49 AM CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s 02:28:54 AM all 0.00 0.00 0.00 12.65 0.00 0.02 2.24 85.08 1359.88 02:28:54 AM 0 0.00 0.00 0.00 96.21 0.00 0.20 3.19 0.40 847.11 02:28:54 AM

Hello I've got small PBX (30 simultaneous connections) based on asterisk (1.6.2.6), which uses Stargate 2N ISDN to GSM gate. It runs ok for day or two, but then I get: dahdi: HDLC Receiver overrun on channel TE4/0/1/16 (master=TE4/0/1/16) in my kernel logs, in asterisk i get: pri show spans PRI span 1/0: Provisioned, Down, Active PRI span 3/0: Provisioned, In Alarm, Down, Active (span 3

Anyone else seen this eth-device and what brings it up? [root at oh1mrr etc]# ifconfig __tmp1192348344 Link encap:Ethernet HWaddr 52:54:AB:DD:2E:D1 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2094689 errors:0 dropped:0 overruns:0 frame:0 TX packets:1645734 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX

" Message from syslogd at localhost at Aug 27 08:57:53 ... kernel:Disabling IRQ #17" is the message I got on all my terminal windows at the time indicated. What is it complaining about? What should I do about it? I got some information from dmesg. It mentions IRQ 17, but the only error is from before the most recent hibernation. Here are some excerpts, in order from dmesg: SELinux:

I have a pretty large setup on one of my customers. Digium TE420B (with echo cancelling module), 3 Xorcom Astribanks with 32 FXS each and 1 Xorcom Astribank with 16 FXO. These FXO ports are NOT used for fax/data transmission, as they are connected to cell phones. Not really related to the issue, but there are also 250 SIP phones. The problem is that fax and dial-up connections are really

An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091118/1cd73154/attachment.htm -------------- next part -------------- A non-text attachment was scrubbed... Name: newtekmail.gif Type: image/gif Size: 12975 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20091118/1cd73154/attachment.gif

hi folks. recently some of our customers complained about bad voice quality on the phone system. i looked at the logs and found a lot of these: [2012-11-03 08:26:38] NOTICE[11305] chan_dahdi.c: PRI got event: HDLC Abort (6) on D-channel of span 1 [2012-11-03 08:26:45] NOTICE[11305] chan_dahdi.c: PRI got event: HDLC Abort (6) on D-channel of span 1 [2012-11-03 08:26:54] NOTICE[11305]

https://bugs.freedesktop.org/show_bug.cgi?id=112070 Bug ID: 112070 Summary: H/W Acceleration sufficiently buggy on Debian to hard lock machine GeForce 7600 GO Product: xorg Version: unspecified Hardware: x86-64 (AMD64) OS: other Status: NEW Severity: critical Priority: not

Hi, On a (bogus) system equiped with a Digium HA8 and 8 BRI ports, I'm reading this: # asterisk -rx "dahdi show status" Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO HA8-0000 RED 109 0 0 CCS AMI YEL 0 db (CSU)/0-133 feet (DSX-1) HA8-0000 UNCONFI 109 0

Hello All, I have 2 Digium card configure on Single machine, which can't share interrupt across all CPUs and sometimes asterisk reach 100% CPU usage. Here is system details and /proc/interrupt o/p. OS: CentOS 6.4 Kernel: 2.6.32-431.11.2.el6.x86_64 Dahdi Version: DAHDI Version: 2.7.0.2 Echo Canceller: HWEC Asterisk Version: 1.8.13.0 Output: /proc/interrupts cat /proc/interrupts

https://bugs.freedesktop.org/show_bug.cgi?id=87983 Bug ID: 87983 Summary: nouveau E[Xorg.bin[1119]] failed to idle channel 0xcccc0001 on G86 [GeForce 8500 GT] (rev a1) Product: xorg Version: unspecified Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: critical

https://bugs.freedesktop.org/show_bug.cgi?id=90482 Bug ID: 90482 Summary: Xorg take 100% CPU when using multiple independent screen configuration Product: xorg Version: unspecified Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: normal Priority: medium

Hi, On a Asterisk 1.8.12 system working OK for months (>100k calls proceed), users are complaining for bad audio. My setup is: PSTN <--E1/PRI ---> Asterisk <--- E1/PRI---> Siemens HiPath <---E1/PRI ---> PSTN asterisk -rx "dahdi show version" DAHDI Version: SVN-trunk-r10414 Echo Canceller: HWEC asterisk -rx "pri show version" libpri version: 1.4.12 A

Hi Asterisk Users, We've been experiencing some tough time regarding a new Asterisk installation connected to the PSTN via an ISDN PRI with a Digium TE121 with the optional VPMADT032 echo cancellation module. For now, I'll focus on something very specific which is summarized on this email's subject. However, here are some general facts for the context: - System pbxfri went

Hi, 1. Has someone met any success at all, connecting a Digium B410P to a Patton Smartnode 4638 (with latest 5.3 firmware) ? 2. If positive, then, which signalling was used on both sides ? My project's goal is use a Patton Smartnode 4638 to act as telco BRI lines, from a B410P-enabled asterisk box. In my testings, I can see channel is respectively up (with patton web server status page)

Hi: I?Bought TDM2400P ,with 24 FXO ports , I installed? the asterisk 1.4.28 and?dahdi 2.2.0?and then i compiled them and configured all, i pluged into 8 pstn line into the Rj connector and then i got messages on asterisk console that alarm cleared on channels 1->8??, at this step everything should go fine ,but when i try to make a call?through the TDM?there is silence and no audio,and then i

I have patched astcc.agi with the HUP patch, but it still hangs from time to time. Asterisk SVN-branch-1.2-r25165M built by root @ vpbx on a x86_64 running Linux on 2006-05-07 00:31:09 UTC bye Ronald

https://bugs.freedesktop.org/show_bug.cgi?id=69928 Priority: medium Bug ID: 69928 Assignee: nouveau at lists.freedesktop.org Summary: [NVAA] Boot of linux kernel 3.12-rc2 hangs QA Contact: xorg-team at lists.x.org Severity: normal Classification: Unclassified OS: Linux (All) Reporter: dirkneukirchen at