similar to: Cisco 7906g & SIP

Dear Asterisk People, I am having problems putting a SIP image on a 7970. I was wondering if anyone can help? First problem is the phone is running version Load IDJar70.2-5-47-17.sbn Boot Load ID7970_64054100.bin Version5.0(0.6S) So I did read that you couldn't simply put the latest SIP image on such an old phone and a newer firmware version should be used. I got

Hi All; Again, the Cisco IP Phones 7942G and using Skinny: I upgraded the firmware to version 8.5 (skinny) and I am using skinny channel (chan_skinny) and the skinny.conf file. The phones are registering, but when we use them to place a call, we only hear tooooooooooo in the handset and we do not hear voice (even when we dial the digits, we only hear toooooooo .. but it dials and destination

Hi, I use Asterisk-1.4.22-3 (on Trixbox) and I have a problem with Cisco 7941G with firmware SIP41.8-0-2SR1S (but also with SIP41.8-3-1S), my problem is that Cisco phone isn't authenticated on Asterisk. In tftp directory I have: apps41.1-1-1-15.sbn cnu41.3-1-1-15.sbn copstart.sh cvm41sip.8-0-1-18.sbn dialplan.xml dsp41.1-1-1-15.sbn jar41sip.8-0-1-18.sbn load115 load308 load309 load30018

I was thinking about complicating my Voip setup by adding CME. I found this example here: http://www.voip-info.org/wiki/view/Asterisk+Cisco+CallManager+Express+Integration and here: http://www.pasewaldt.com/cme/cme_index.htm Would anyone like to comment on their experiences using CME with Asterisk... I would like one of my Cisco phones to remain SIP connected directly to my Asterisk system. The

Does anyone have the .bin file(s) to convert a Cisco 7940/7960 back to the CallManager image? I want to start playing around with the chan_skinny addition, but it seems the .exe's from cisco want to open a connection to a SQL server or CallManager (which I don't have).

Hello I recently get a Cisco 7940G IP Phone and I try to make several things with it and I en counted many difficulties: 1.) I tried to unlock the phone and to set manually IP Address, Netmask, Gateway etc. I don't get any luck. 2.) I tried to upgrade firmware like they said with tftp server... I downloaded: P0S3-08-11-00.zip and I uncompressed the files in tftpboot directory. I don't get

Hi, sorry for my insistence but this is a big problem for me..my steps for remove card are ok ? Thanks. ------ Salvatore. ----- Original Message ----- From: "Sasa" <sasa at shoponweb.it> To: <asterisk-users at lists.digium.com> Sent: Monday, November 26, 2007 4:25 PM Subject: [asterisk-users] Remove a TDM Card > Hi, I would like remove a Digium TDM2400P from

Hi, I have a problem with Asterisk-1.4.22 (with TB 2.6.2) & Portech MV-370, my problem is that when arrived an external call I don't view (on my internal phone) the phone number but I have the number extension that is configured on MV-370. The MV-370 configuration is: Mobile to Lan Table : 0 * 192.168.1.1 Lan to Mobile Table: 0 * # SIP Setting: Display Name: Portech User Name: 1005

I have read the wiki and several other internet documents. Can anyone make a comment as to what kind of functionality will you loose if you use Cisco 7940 phones with asterisk 1.4 things like: MWI, call transfer, conference,etc,etc. I have a customer with 6 of those phones that he like to use with the asteirsk PBX. thanks, -- ------------------------------------------------------------ Erick

As part of a project to move a clients Cisco phones to SIP to work with an Avaya system, I'm taking a Cisco 7961 we bought and adding it to our Asterisk setup. Now, I've gotten the firmware files from the site, the latest version is 8.4 which contains the following files: apps41.8-4-3-16.sbn cnu41.8-4-3-16.sbn cvm41sip.8-4-3-16.sbn dsp41.8-4-3-16.sbn jar41sip.8-4-3-16.sbn

Hello all, I've got myself into a bizzare situation that I can't seem to get myself out of... Was wondering if anyone had some advice that might get me 'over the hill' on this... Some background: PBX consists of an Asterisk box (running TrixBox), 4 Cisco 7960's, 2 Polycom IP500's, and now an additional Cisco 7960. The phones are all on a separate LAN. There is

Hi, I have a asterisk/voip newbie and I am sorry if my quetion is banal. I used in my private LAN, Express Talk on Windows XP and Asterisk latest version on Fedora Core 4 , with this configuration in Express Talk Lines menu: Setting for Line: Default Line Settings Full 'friendly' Display Name: port SIP Numeber: 200 Server: 10.0.0.112 Password: mypassword In menu Network: Local SIP Port

hi! i had some good news regarding the cisco 7920 and the internetworking with asterisk (and possibly SIP ?). Status: chan_sccp.so not coredumping anymore :-) Phone contantly in reboot loop [see below] :-( Reboot Loop means: ------------------ Phone auth's with AP Phone gets IP from DHCP & TFTP Server Phone loads OS7920.TXT Phone loads SEP<macaddr>.CNF.XML Phone loads

Does anyone know if version 3.1 is Call Manager or SIP? Thanks.

Hi there, In Cisco web site http://www.cisco.com/en/US/products/hw/phones/ps379/products_data_sheet09186a008008884a.html It says that regardless of the technology used you have to buy a licencse. Does the license apply to use the phone with asterisk, or, can i just buy the phone? Also, the phone does not requiere to use an AC adapter if used with PoE injectors/switches. Can non-Cisco PoE

I have an interesting observation which I thought I'd pass along to save other people from spending time trying to 'fix' it. One of my clients uses Charter's so called "business phone service". They provide 'analog' phone lines over IP. In general, they've worked OK. End users were saying that the phone are "cutting out" at times. What

<div><br><div><br><br><br><br><br><font color="#990099"><br></font><blockquote style="border-left: 2px solid rgb(0, 0, 0); padding-right: 0px; padding-left: 5px; margin-left: 5px; margin-right: 0px;"><div><div><br> <asterisk-users-request

Hi All; Can anyone advise if using Cisco IP Phones in skinny protocol is fine or not? Or it is better to use it in SIP protocol? Regards Bilal

Hi! I have setup a router with 3 NIC: inet->eth0->eth1-local_users ->eth2-DMZ_server I have also setup dhcp and DNS on the router. DHCP is server only for eth1 while on eth2 I have static IP address. So everything works except connecting local_users on eth1 to Samba shares on the server in DMZ by server name. Yes, I have it in my DNS records to point to it and with nslookup

I've got a Cisco 7960 that I'm trying to convert to SIP. Here's what "Firmware Versions" says: App Load ID: P00305000300 Boot Load ID: PC03M030 Version: 5.0(3.0) The files that I have are: P003-07-1-00.sbn P003-07-1-00.bin P0S3-07-1-00.loads P0S3-07-1-00.sb2 If I put "P003-07-1-00" in OS79XX.TXT, the phone tries to tftp XMLDefault.cnf.xml. I've