similar to: sip forking needed for ekiga 3.0

Hi, The problem solved After installing new zaptel drivers, we ran the "genzaptel" command to generate /etc/zaptel.conf file,checked with "zttool" command and the card status was "Yellow alarm/Blue alarm/Recovering" and the card LED was blinking red and green. The problem was with the generated zaptel configuration., but not with the pin

I am thinking of going with a Dell PowerEdge 1950 ||| for a new CentOS/Asterisk set up. It will have dual 2.33GHz processors, 16GB memory, two 500GB hard drives (presumably mirrored). I also plan to get a Digium TE220B to go with it. (a non-dell server is not an option, but I am wondering if there is a better one to consider) The system will be a voice mail repository for 4-6,000 students.

Has anyone had any compatibility issues with a TE110P card installed on a Dell Poweredge 1950? I noted the following error on the LCD display of the Dell Poweredge 1950: E1711 PCI PErr Slot 1 E171F PCIE Fatal Error B0 D4 F0. The Dell hardware owners manual states that it means the system BIOS has reported a PCI parity error on a component that resides in PCI configuration space at bus 0,

ekiga registration fails. I've set nat = yes ( also blank ) and i've set externip. Anybody have a sip.conf that works? Here's the sip debug: Reliably Transmitting (NAT) to 86.64.162.35:5060: REGISTER sip:ekiga.net SIP/2.0 Via: SIP/2.0/UDP 10.10.11.180:5060;branch=z9hG4bK17818198;rport Max-Forwards: 70 From: <sip:test at ekiga.net>;tag=as64618445 To: <sip:test at

I am experiencing a "606 not Acceptable" error trying to set up an Asterisk server as an ekiga.net client. My server is behind a firewall with NAT routing. I have googled this problem and read about Asterisk feeding its local ip address to ekiga.net. That seems to be my problem. I tried putting stunaddr=stun.ekiga.net into the sip.conf file under [ekiga]. I also tried

dear All, when first installing CentOs some 6 months ago, I noticed this strange thing called Ekiga. Now, some guys at work use Skype and I heard that's owned by Microsoft. So enter James. I bought a webcam, actualy 2, to test Ekiga. Logitech Webcam c210. I saw this url :http://www.ideasonboard.org/uvc/ on this url :http://wiki.centos.org/AdditionalResources/HardwareList/Webcams and in

Dear All I have installed Asterisk on my centos 5.0 and I have two other centos 6.0 and centos 5.6 with ekiga sip client. The centos 6.0 can make successful sip calls but centos 5.6 cannot. Among the Asterisk logs, I found that the centos 6.0 has ekiga 3.2.6 but centos 5.6 has ekiga 2.0.2 . How can I install/upgrade my older ekiga? Thank you

I'm having a problem getting a good clear output sidnal from Ekiga to a VOIP conference call using the Ekiga.net free conference call system. I'm told that each time I speak, my voice is clear & intelligible for about .5 - 2 seconds, but then it starts to be garbled, sounding like the sounds R2D2 makes. I've used 2 or three mic/headsets - two plug into my audio I/O sockets on my

Hi all, after having developed a theora video codec plugin for Ekiga/OPAL based on libtheora I would like to ask if someone could please commit the enclosed patch to the theora svn trunk. It - fixes cross-compilation for windows using minGW - allows to disable the build of the examples via configure switch This is required for our cross-compiled win32 build of Ekiga since some dependencies of

So we've got a TE410P configured as E-1. The PRI is showing up as normal, I have green lights, but d channel doesnt seem to come up and i keep getting this error if i do a "pri intense debug" The carrier swears up and down that there are no issues on their end. Any thoughts? localhost*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > M3:

Hello, I have a Sip phone (Siemens C470IP) which works perfectly with different VoIP providers (iptel, betamax, ovh...). It also worked well with my testing server (ubuntu and inside the LAN). But now the problem i have is that the hardphone doesn't connect to my dedicated server (debian lenny / Asterisk 1.6.2.13). The strange thing is that ekiga can connect to the same asterisk server with

Hello, Asterisk 1.4.26.2, FreeBSD 8.0-RELEASE We have a very simple setup, using SIP softphones and a simple diaplan as follows in the examples below. When I dial the 700 extension it asks me for the extension and password, and it always says "login incorrect". The mail system send the email ok and Ekiga shows that I have vaoicemail, so the only thing that is failing is the actual

I have ekiga registering to a voip provider (skypho) and receiving external call through the stun server. I want to redirect inconditionally all these calls to my asterisk server, but I can't understand how and what should I configure in asterisk in order to accept the redirected call. In asterisk console I can't see nothing when ekiga passes the call. If I turn asterisk's sip

I''ve seen the Nexenta and EON webpages, but I''m not looking to build my own. Is there anything out there I can just buy? -Kyle

Unbeatable price for a low end Asterisk server (or any server for that matter) http://configure.us.dell.com/dellstore/config.aspx?c=us&cs=04&kc=6W300&l=en&oc=bednv4k&s=bsd I wonder if anyone has any experience with this box and Digium or Sangoma hardware? Any compatibility issues? If not, I might stock up on them. Thanks, Steve Totaro -------------- next part

Dear all, since it could be of interest for the list, here I post a link to compiled kernel for XEN 3.1 on a DELL PowerEdge 1950 compiled with gcc (GCC) 4.1.2 20061115 (prerelease) (Debian 4.1.1-21) on a Debian4 distribution. This is provided AS IS AND WITHOUT ANY SUPPORT AND/OR ANY RESPONSIBILITY :-) The first link (7 MB) pack all the files you should have in /boot. The second link (12 MB)

returning newbie. Trying to register ekiga for the first time to my asterisk server only. [204] user=204 context=internal type=friend secret=xxxxxxx insecure=very canreinvite=no host=dynamic disallow=all allow=ulaw allow=alaw nat=no Can anyone tell me what I am missing? I am not behind NAT or a firewall -------------- next part -------------- An HTML attachment was scrubbed...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! I'm trying to connect to ekiga.net through a client connected to my Asterisk server. For it I am being based on this [1] document. Next I put the configurations that I am using. /etc/asterisk/sip.conf: ; Outgoing to ekiga.net [ekiga] type=friend username=MyUser secret=MyPass host=ekiga.net canreinvite=no qualify=300 nat = yes stunaddr =

We are currently running CentOS 4.5 on older Dell Systems. We are upgrading to Dell PowerEdge 1950 with a PERC 6/i raid controller. CentOS 4.5 installation does not see the PERC 6/i controller. Dell and LSI Logic only support RHEL 4U6 and higher and SuSe. I've tried building the boot images with the new driver for installation but kickstart still doesn't see the raid controller.

Hi all, I am planning to improve virtualization in my company. So I have already a pool named p.e. Pool1. I have 5 servers Dell PowerEdge 1950 in it. Now I have 4 servers Dell PowerEdge 2850 too. Can I add 2850 to Pool1? I can''t find anything about compatibility for different hadrware in new release. -- Best regards, Den. _______________________________________________ Xen-users mailing