similar to: [CID] Unknown IE 18/21?

Hello I've been googling for a couple of days now, but still can't figure out what to put in zapata.conf to get it to report CID. Unless I'm mistaken, France uses ETSI FSK for CID method and bell 202 as CID FSK Standard: http://img219.imageshack.us/img219/7207/linksys3102cid1jj7.jpg http://img219.imageshack.us/img219/4625/linksys3102cid2ld5.jpg Does Zaptel support those on Digium

Hello again, I am using mix monitor and the majority of the sound records perfectly. I then get a "Internal Data Stream Error" near the end of the sound file. Has anyone ever seen this? I am allowing the ULAW amd ALAW codecs and an example dialplan entry is ; ; phone line phone1 exten => phone1,1,Answer() exten => phone1,2,MixMonitor(test.wav|av(0)V(0)) exten =>

Having a problem w/ not getting CID name from a PRI. CID Name appears in the PRI debug, but even after a Wait(4) it still appears after the phone is ringing. Here is the relevant info from my PRI debug output. Line 4 is a NoOp showing me trying to echo Name and Number. Line 6 dials the extension, and you can see callerid name get presented on line 29. Again, there is a Wait(4) before the

The latest libpri is supposed to handle this properly, but doesn't seem to. Here's the debug info. CALLERID(name) is set to empty. < Protocol Discriminator: Q.931 (8) len=66 < TEI=0 Call Ref: len= 2 (reference 256/0x100) (Sent from originator) < Message Type: SETUP (5) < [04 03 80 90 a2] < Bearer Capability (len= 5) [ Ext: 1 Coding-Std: 0 Info transfer capability:

Hello When using LookupCIDName, Asterisk 1.4 says that it's deprecated, and we should use "${DB(cidname/${CALLERID(num)})}" instead, but I don't know how to use it: ;DEPRECATED exten => s,1,LookupCIDName ;ERROR exten => s,1,${DB(cidname/${CALLERID(num)})} I guess I should use this as a parameter to a function, but which one? Thank you.

Hi The first step I have to go through when users call into our IVR is to handle the case where users' PBX hides their CID number. In that case, I need to have them type their phone number (ten digits). OTOH, those who call without hiding their CID number are sent directly to the main menu. How would I go about prompting users for their phone number? Here's what I have at this point:

Hello, In case there are other users of the AsteriskWin32 port... I haven't really used the AGI feature of Asterisk to run an application from extensions.conf. *Win32 supports Perl, which I don't know. Apparently, it's also possible to write AGI applications as EXE's (there's a eagi-test.exe file installed by default). => When a call comes in, I'd like an AGI

Hi folks, My v1.6 Asterisk system logs all Call Detail Records to a PostgreSQL database, including those handled by the Privacy Manager. Unfortunately, even though I can use the CLI to see the information being submitted by anonymous callers to satisfy the demands of the the Privacy Manager, that information is not recorded in the database. Instead, all that is written to it: clid:

My legacy PBX accepts CID number, but not name. My old PRI vendor never sent the name, so there was never an issue. I have wedged asterisk between the Legacy PBX and PSTN. PSTN - PRI - asterisk - PRI - Legacy. Any calls from asterisk (sip and iax extensions) which have callerID set, will not connect. The legacy PBX hangs up, but asterisk thinks that it is still ringing. I have added

Hello, I'm a new Asterisk user and I hope I haven't missed something, but I can't seem to find an answer to this issue. I have a Cisco SIP gateway terminating calls into a 7960 phone. The issue I would like to fix is if I have an incoming call without an ANI, such as directly from my TDM phone switch, Asterisk says the call is coming from the IP address of the Cisco gateway,

Hello About Record(), ATFT 2nd Edition says that "if the filename contains %d, these characters will be replaced with a number incremented by one each time the file is recorded." Problem is, the documentation doesn't explain how to refer to this filename later in the dialplan :-/ In this particular example, I want to move the file to the web server's /htdocs so users can

Hi list, My caller ID is not working anymore on my TDM11B (TDM400P) cards and i get this error message on the asterisk console: == Starting post polarity CID detection on channel 4 -- Starting simple switch on 'Zap/4-1' [Jul 8 11:58:55] WARNING[9539]: callerid.c:219 callerid_get_dtmf: Couldn't detect start-character. CID parsing might be unreliable A long time ago my

Hi Folks, Prior to upgrading my Zaptel sources everything was working fine. I have a X100P connected to my analogue line. The handset port of the X100P is connected to my desk phone's line 2 input. When the analogue line rings I see the CID on my line 2 but not from Asterisk on line 1 via the Cicso ATA. This used to work fine until I upgraded the sources. I get this when watching the

We have now got our new PRI line (10 channels, 100 numbers) connected and everything is working except the outgoing caller ID. Whatever SIP phone I'm using, the CID that's shown is the very first number... ----- s n i p ----- [default] include => outgoing include => priin [outgoing] exten => _NXXXXX.,1,Macro(dial,08${EXTEN},${RINGTIME}) ; Local number (w/o areacode) -

    I am trying to troubleshoot two Asterisk servers that have an IAX2 trunk between them.  Calls come and go but there is no CallerID from the remote server either way.  One of the servers is running Asterisk 16 and the other is an older 1.8 install (I know, I am trying to get permission to update).  The trunk between servers is very simple.  Something like: Server 1 (Mexico) [panama]

Last month I moved a 1.4.x Asterisk install to Asterisk 11.5.1. Everything is working well, until I noticed that Caller ID between facilities are showing properly, on the phone display, until the handset is picked up, then it's displaying NAME NOT FOUND. I do database lookup against extension number (Of remote PBX) and use that as the MySQL key to pull name. Snippet below: -- Executing

Hi, We have recently implemented asterisk as the office PBX, and as a GUI, we chose Elastix. All seems quite easy and am very pleased with the way Asterisk is running and handling calls. To summarize briefly, our setup looks like this: LAN -> Asterisk PBX (Elastix) -> Asterisk TDM (basic CLI with libSS7) We get a whole 3 digit number series from our telco. So, like, +1 312 765 7xxx

Hi, sorry for this a bit OT. I'm using VoiceTrading for some calls -premium route- and can't get CID to work despite the fact that CALLERID(num) and CALLERID(name) are setted. I ask in VT->myAccount to accept calls from my IP without checking username & secret. On incoming calls the CID is setted to 0100000000 If I accept calls from username & secret and no IP relation,

lol just posted this yesterday, it's for any ODBC DSN so Access or SQL or an Excel spreadsheet, as long as it's set as a DSN. This will work with outgoing Caller ID as well, it's just how you set it up in your dialplan. If you want I can email you the .agi since email will undoubtedly mangle the script. hth. HOWTO: A simple AGI application to modify incoming CallerID on the fly using

Today I received a TDM11B (1 FXO and 1 FXS) and got it installed just fine. I bought the card mainly to get caller ID to work properly in Sweden, and that works just fine. However, if the called or calling party hangs up after I hangup my SIP channel, polarity CID detection kicks in and dials a couple of signals to my incoming context. This happens with Asterisk 1.0.6 and CVS-HEAD. I have tried