similar to: Asterisk and Avaya 4610 handset

I just registered an Avaya 9620 set to my Astlinux system (0.47 - Asterisk 1.2.22), using Avaya SIP Firmware version 2.0.1.34. Set mailbox=ext at default in the sip.conf Found MWI worked immediately. Turned off as expected. Have Fun! Tom -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I'm new to the list, so I apologize in advance if I'm beating a dead horse by asking this, but I read somewhere that asterisk 1.4 has MWI working for Avaya and their rather troublesome SIP firmware. Can anyone verify this before I go changing phone systems around? Thanks Derek -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have an Avaya 4602 IP phone that was previously working with Asterisk. It was being used elsewhere for several months, and I recently set it up again to work with Asterisk. Everything works fine for several minutes -- I am able to receive and make calls as expected. However, after a few minutes, and every few minutes thereafter, I get the following message on the console: -- Got SIP

Hi! Have a weired problem with Avaya 9650 phones: extensions.conf exten => 0317998975,hint,SIP/0317998975 exten => 0317998975,1,Goto(0317998975-${DEVICE_STATE(SIP/0317998975)},1) exten => 0317998975,2,Hangup() exten => 0317998975-INUSE,1,VoiceMail(0317998975 at inputinterior.se,bs) exten => 0317998975-INUSE,2,Hangup() exten => 0317998975-NOANSWER,1,VoiceMail(0317998975 at

Hi, It seems to me that DECT Gigasets do not support MWI when connected to a Polycom/Kirk DECT base station : when a new message is dropped into user's mailbox, I can see a NOTIFY message sent by Asterisk to Polycom/Kirk DECT base station (here a KWS300) but Gigaset's handset MWI remains unlit. At the same time, a Polycom/Kirk handset subscribed to the same base station would turn its MWI

Hi ! I am trying to connect Asterisk with Avaya Definity. I use this tutorial to do this http://cyril-constantin.blogspot.com/2008/04/howto-connect-avaya-to-asterisk.html The comunication between avaya and asterisk is fine but without sound. I can call from Asterisk to Avaya and extension ring or Avaya to Asterisk and extension ring too but I cant hear anything Example Asterisk ---> Avaya --

Hello, I'm trying to create a H.323 trunk between Asterisk 11 and Avaya. I have done this before between Asterisk 1.6 and Avaya but had some issues placing external calls from the Asterisk to the Public network which is connected to Avaya. I'm trying to create that trunk on Asterisk 11 because the 1.6 is outdated and has no support. On the Asterisk side I have Aastra 6731i SIP phones

Right-- I've seen the Avaya document you cite below. It says "To administer DHCP option 242, make a copy of an existing option 176" but I don't have any example of option 176 or 242 to copy, and don't know what to do to /etc/dhcpd.conf to make it offer option 242. Then there's this long table of parameters to use with (presumably) option 242. I was hoping someone had a

I'd like to start configuring my Avaya 9608G phones for use on Asterisk / FreePBX / PBX-In-a-Flash. I'm using a variety of other phones on my system without major issues. I've read the discussion back in March, May and August of 2016, but unfortunately, my difficulty is much more basic. I think it has to do with DHCP, specifically, what options I'm offering the phone via DHCP.

After purchasing the Uniden TRU9480 and then the Panansonic 5672, both of which do not have "phone company" compatible FSK/stutter MWI, I finally got smart and found out just which Panasonic phones have this feature. Only the following 5.8G models in their current line have FXO compatible MWI. I purchased the 5771 unit and one remote. I have confimed it does in fact work with Asterisk

I have a situation that I need help with. I have 2 phone systems, 1 Asterisk and 1 Avaya. All voicemail is kept on the Avaya system. Whenever a call comes into an extension that the Asterisk server owns, I re-direct it to a different number that is owned by the Avaya System. If that Avaya extension does not answer it, I send it to the voicemail on the Avaya Messaging system for the extension that

I am not interested in open source solutions. I want to know how much the propriety systems cost in terms of licensing. Specially Avaya now a days per extension. Exclusive or Inclusive of the hardware for 10 agents as noted. Thanks On Thu, Sep 2, 2010 at 8:18 AM, Muhammad Shomail Haider <msh0786 at gmail.com>wrote: > Hi Bruce, > > It all depends what exactly you are in need of. A

Has anyone had any luck getting the Avaya IP SoftPhone to work in wine? I get these errors on Ubuntu 8 Code: preloader: Warning: failed to reserve range 00000000-60000000 wine: creating configuration directory '/home/microchp/.wine'... preloader: Warning: failed to reserve range 00000000-60000000 preloader: Warning: failed to reserve range 00000000-60000000 err:dosmem:setup_dos_mem

Hello Maybe a silly question, but after some searching couldn't find answer. Is there a number I can dial to pickup and listen to my voicemail messages on my SIP phone? I am used to eg dialling *17 to pickup my voicemail messages on Avaya system? Angus -------------- next part -------------- An HTML attachment was scrubbed... URL:

The company I work for has deployed an Avaya IP phone system. They have deployed the Avaya 4602 and 4620 IP telephones. They might be sending me one of these phones for use in my home office. Question: Can I make this IP telephone register and work with my Asterisk server? I don't know if it is a SIP phone? I searched thru the Avaya site, but can't find whether it's a SIP phone or

Hi * Users, I ran into a problem when I was trying to communicate an avaya IP Office talk to asterisk with SIP Trunking. I had successful calls from asterisk to Avaya but not from avaya to asterisk. Can someone provide me insight on how to address it or the path to resolve it. The error I get is mentioned below: (dialing 32564 from avaya to asterisk) "[Nov 6 17:14:23]

hi sorry about the urgent but it is urgent i have problems configuring a connection between asterisk and avaya using H323. the module i am usign is ooh323 what do you need to help me? and any tip or hint? thanks!!! David -- (\__/) (='.'=)This is Bunny. Copy and paste bunny into your (")_(")signature to help him gain world domination. -------------- next part -------------- An

Hi All, I need help with integrating AVAYA 8300, the avaya can do outbound calls but cannot do inbound calls, im sending calls from sip to avaya using E1 ISDN line. My config was based on aspect dialer it's working with aspect but not with avaya. My config and error is below. zaptel.conf span=1,1,1,ccs,hdb3 bchan=1-15,17-31 dchan=16 zapata.conf group=0 context=avaya switchtype=euroisdn

So far I have not found a way that I can register the Avaya phone with Asterisk. From what I have found so far is that Avaya phone needs the Avaya Media Server and Avaya Gateway. Looking at the h.323.conf (in Asterisk) and the file 46xxsettings.txt (avaya file located in tftpboot) there are no settings to make the phone initialize. I have sent an email to the Asterisk Users Mailing List to see

Hi * Users, I ran into a problem when I was trying to communicate an avaya IP Office talk to asterisk with SIP Trunking. I had successful calls from asterisk to Avaya but not from avaya to asterisk. Can someone provide me insight on how to address it or the path to resolve it. The error I get is mentioned below: (dialing 32564 from avaya to asterisk) "[Nov 6 17:14:23] WARNING[6227]: