similar to: Using dedicated eth2 card for SIP trunk line to ISP provider - how to setup ?

Hi, has anyone connected Asterisk to Cirpack softswitch sucessfully ? Any howto or more info about needed Asterisk SW and setup ? Thanks in advance, regards, Rob.

Hi, I'm curious if anyone knows of any possibility to use video VOIP client (like Ekiga or Linphone or...) under Linux that could be operated by touchscreen friendly GUI (bigger buttons, large keypad, etc...) ? I like Ekiga, but GUI is small and cannot be operated via touchscreen... But maybe there are some skins for existing clients that are more touchscreen friendly ? Thanks in

Hi, I'm speech recognition researcher and would like to do some research on recognition robustness in echo distortion of speech signal. Since VOIP is becoming wide spread, I'd like to simulate (one or more) common echo distortions that mostly appear in voip communications ? Any example, FIR or IIR filter or acoustical system response ? Any other distortion worth researching ? Thanks

Hi, I'm getting this error when registering with SIP server using Asterisk 1.4.10 and Freepbx... I'm getting this error no matter what I try to setup in sip.conf : - I'm getting confused whether options are maxexpirey=36000 or maxexpiry=36000 ? - Can I solve this with some settings in sip.conf or is this problem harder ? - I've read something about Asterisk's bug on this

Hi, I have an older phone with touch screen from Philips. It have it connected to Sipura 3000 FXS port and majority of features work ok. But phone also has touchscreen and web browser that I'd love to use for accessing my local web pages. But the phone only allows me to setup ISP phone number (username and password) and it wants to call it to get to Internet. Since it is connected to

Hi, I wonder which PRI interface card is most stable and supported for EuroISDN and Asterisk ? Are they stable enough ? Any tips ? Thanks in advance, regards, Rob.

Hi, we're testing Asterisk 1 RC 2 behind ordinary router and NAT. Since we're sharing network with web server it seems like voip packets are not coming through fast enough (Digium demo dies after few seconds...). It's the same if I make direct calls (passing Asterisk) so we conclude it's network problem - it also work normally outside our router... I wonder what solutions can we

I have the problem when my localnetwork do telnet to the net Shorewall:FORWARD:REJECT:IN=eth0 OUT=eth2 my files are the following: policy #SOURCE DEST POLICY LOG LEVEL LIMIT:BURST loc net CONTINUE info loc fw ACCEPT info loc loc ACCEPT loc dmz ACCEPT info fw

Marta, As Alan pointed out the loc->net policy is Continue, it should probably be loc->net ACCEPT. This is from Tom''s Shorewall Documentation... http://www.shorewall.net/Documentation.htm#Policy CONTINUE - The connection is neither ACCEPTed, DROPped nor REJECTed. CONTINUE may be used when one or both of the zones named in the entry are sub-zones of or intersect with another zone.

Hi, I have the following config: 1 PC with 3 NICs, that shares internet connection to LAN. eth0 uses a public IP ($public_ip_1) eth1 uses a private IP ($private_ip) eth2 uses a public IP ($public_ip_2) I have a webserver and a mailserver accesible by $public_ip_1 (eth0) I have a LAN with all terminals using private IPs, and $private_ip (eth1) as gateway. $public_ip_1 and $public_ip_2 are from

Hi there, I have two ethernet connections of 2Mbit/s each and I''m trying to add them together to one 4Mbit/s connection but I cannot get more than approximate 1Mbit/s! My setup: I have a LAN (10.2.18.0/24), connected to a larger network (10.0.0.0/8) by two WAN-connections with 2Mbit/s each. On each end I have a Linux router. I first setup the routers to use TEQL with one of the

I''ve got a system with 3 nics. eth0 is down, eth1 is external and eth2 is internal. (This is in a "lab" so the "external" is a 10.x.x.x address.) Before starting xen, the broadcast for eth2 is 192.168.1.255, after starting it becomes 0.0.0.0 - which sure doesn''t look right to me - plus I''m getting networking problems. Been digging for a while and

Hi, I'm trying to implement dynamic routing of incoming calls to local extension if previous outgoing call was unanswered. But after I do Goto to s-NOANSWER, variable ${EXTEN} changes to 's-NOANSWER'. I guess this is normal, but I don't understand why ? How to workaround on this one ? Thanks in advance, regards, Rob. [outbound-capi-ISDN] exten => _0.,1,NoOp(Calling ISDN

Sirs, I have recently been interested in your Maxstat. I have computed with my own programme the ranks (by using the Kaplan-Meier method and the log-rank test) with the formula (Observed-Expected)/(SQR Var). The results are similar but not exact to the M value obtained with the Maxstat. I would like to know whether you are using some correction or adjustment in computing the different ranks. Thank

Hi, I have following problem. Asterisk is connected to ISDN router on BRI interface. ISDN PBX is connected to another channel of BRI interface. Now I'd like to route all incoming calls first to Asterisk and then if caller wants to talk to extension on ISDN PBX then I'd like to route call to another capi channel but free the current one. Is this possible at all or do I need to take 2 capi

Hi, I'd like to use DISA properly for my case - I'd like to handle it right, if user when in DISA doesn't dial any number - how does Asterisk return from DISA cmd ? I'd like to dial some default number if user doesn't dial anything or give him some message - but I don't know what gets executed after DISA if nothing is dialed .... I'm reading this on wiki, but

Hi, I've updated my Asterisk 3 times with : cvs checkout -r v1-0 zaptel asterisk asterisk-addons and then do cd asterisk make clean && make && make install make samples make progdocs and then when I run Asterisk I get : Asterisk CVS-v1-0-02/11/05-01:46:25, Copyright (C) 1999-2004 Digium. Is this a bug in CVS handling or am I doing something wrong ? How to check which

Hi, thank you for last info. we've tried to use te110p but failed. We're quite surprised that cable wasn't included with the card as any documentation, at least on HW setup and installation, yet cable pinout for connection to PRI interfaces.... 1. We have followed instructions on your site and from Beronet guide, but card just keeps blinking and nothing happens (also no useful

Hello! I have a problem. May be here exist anyone who has encountered with the following problem. I have a router which is connected to 2 ISP from external side and one LAN internal interface. The feature is that the one ISP allocates a subnet xxx.xxx.xxx.160/28 for me but I split it into two subnets xxx.xxx.xxx.160/29 and xxx.xxx.xxx.168/29 and assign the latter to the internal interface. Also

The problem is that I have only 2 ethernet adapters in my linux router, one of this adapter pluged to the LAN and the other is pluged to a HUB who have 2 routers DSL. Each DSL routers have an static ip and the solution that I found was creating an eth0 and eth0:1 but with this option I have any way to use the eth0:1 adapte... Any one knows a solution for this ? Regards.