similar to: Queue Pickup

I'm trying to duplicate a behavior we had with our old avaya system, and I've come across Auto Answer (Ring Answer). However, its not quite the same yet. Right now, when I dial **5053, it will add the SIP header for Ring Answer and it will call 5053. The phone auto pickups just fine. However, we need that call to be muted. If you were to call into a meeting, we wouldn't want them to

Question: Is it possible to pickup someone else's call who didn't "park" a call? My boss would like to see a way to pick up some one else's incoming call if they aren't at their desk and it's not forwarded. So if my phone were ringing and he knew i ran down the hall, he could press some key combo and give my extension, and it would transfer that incoming call to him.

Does anyone have flow charts or digit/key cards for some of the more popular voicemail systems out there? (shows which digits/keys to press, where it takes you, etc.) I need to create some of the new voicemail system. Send 'em my way if you have them. nt_jnewman at yahoo.com Justin ____________________________________________________________________________________ Looking for last

Hi, Surely, I must be overlooking something. If I run the following SQL queries I don't get the same number of rows. Is this coherent? mysql> select * from queue_log where queuename = '4010' and FROM_UNIXTIME(time) between 20080308000000 and 20080313145900 group by callid; 357 rows in set (0.01 sec) mysql> select * from cdr where dst = 4010 and calldate between 20080308000000

Dear all I am going to setup Asterisk Call center solution and i have setup my queue and agent i have 2 SNOM ip phone but when i call to queue my agent phone is rining without musicnhold or when both phone is busy then i call to queue its directy hangup without musicnhole means my call not goes in to queue what is the problem my queue.conf [root at pbx asterisk]# cat

Hi list, i'm trying to do that iax channels can acces the pickup feature(normaly *8 dialing). But always the iax channel when dial *8, search for the extensi?n *8 on its context. I know i can program the *8 extension with the pickup applicati?n. But its doesn't works for me, becouse i need to pickup some calls comming from IVR's o Queues. And there de exten is no the same as the

Does anyone know if the ABIOSDSK service in XP would "find" and a HDD image pushed to ram by MEMDISK?? ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping

I have a queue I configured as "strict" and a cron script I use to QueueAdd and QueueRemove agents according to my company's requirements. Usually I have 2 or 3 agents at a time and the ring strategy is ringall. These agents use non-open-source Windows softphones that do not let you configure it so that if they're on the phone, a second call will be rejected (agent busy).

I'm having trouble with call pickups. Suppose ring group is 100 and has extensions 101 and 102. Someone calls 100, 101 rings and 102 wants to pick the call up. If 102 dials **100, call pickup works. If 102 dials **101, call pickup fails. In my dialplan I have: exten => **101,1,NoOp(pickup extension) exten => **101,n,Pickup(101) exten => **101,n,NoOp(pickup group) exten =>

Hey there list ! I'm receiving negative feedback when people try to pickup another ringing phone by pressing *8 on there own Grandstream device. These are my setting that should make pickup possible : all my sip-clients (Grandstream) have this in their config (sip.conf) : callgroup=1 pickupgroup=1 canreinvite=no qualify=yes So they are all in the same pickupgroup... This the

Hi all, I have a GXP2000 with BLF configured. I follow the configuration guide to enable the pickup cmd as follow and include it under corresponding content. [BLF_group_pickup] exten => _**1XX,1,Pickup(${EXTEN:2}) exten => _**1XX,n,Hangup The I press the single key to pickup the call to extension 100 when there is a call to it. From CLI, I can see it issue **100 to asterisk but failed

Hi! > How to do this ?? > To proceed with your answer on PICKUPMARK, where do I put this ??? Look at the example for Asterisk 1.4 on this page: http://www.voip-info.org/wiki/view/Asterisk+cmd+Pickup Philipp

Hi, If my memory serves me right, up to Asterisk 1.6, Queue app internals kept the application from working some other apps such as PickUp. I wonder if such things are possible (and if possible, still keep useful Queue Logs ie logs in which picked up or transfered calls are shown as such): 1- a call enters a queue, a phone rings, and a non-Queue member dials some digits and speaks with caller 2-

Hi, according to the description of Pickup() on page http://www.voip-info.org/wiki/view/Asterisk+cmd+Pickup I can use this command to pickup a call at a certain extensions. When I try this with e.g. exten => *8200,1,Pickup(200) Asterisk tells me that the highest value for the Pickup command is 63. Wenn I enter the number of a callgroup instead of an extension, I can pickup the call.

We are installing Aastra phones (480's and 57i's) into a fairly simple asterisk setup. Although call park & pickup work fine using xfer to 700 (to park), dial 701 (to pickup), we are unable to make the park/pickup softkey feature work on the aastra's. Although we've programmed the softkeys per the manuals, they seem to have no effect (just dead). For example, our 57i is

I cannot use CVS, is there anoyher way to use direct pickup ? Thanks again Giordano ________________________________ Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Alexander Lopez Inviato: venerd? 16 settembre 2005 17.53 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: RE: [Asterisk-Users] direct sip call

I have a TDM400 in the server. I want to press **1XX to pickup a call. It is ok if I pickup a call dialled from 1XX to 1YY (internal network call). However, it is failed to pick up a call from PSTN thro' TDM400 card. It seems I can't guess the correct context of it. How can I know the context of the call using CLI? The default context of the TDM400 is from-pstn but pickup still

Hi All, I'm using Asterisk 1.2.14 under openSuSE 10.2 with kernel 2.6.18. I have Wildcard TDM400P card and D-Link DPH-120S and DPH-140S SIP phones. I would like to be able to pickup ringing extention from any SIP phone using Pickup() application. from my dial plan: [incoming] exten => s,1,Dial(SIP/somebody1|60|tTrR) [internal] include => outbound-local include => parkedcalls

I'm trying to set the Pickup feature. I'm setting my extensions.conf as: exten => _*.,1,Pickup(SIP/${EXTEN:1}) but if, for example, extension 03 is ringing by a call made from extension 01, and I try to pick it up from extension 02 (by dialing *03 from extension 02), I can see in the Asterisk console (Verbosity set to 10): -- Executing Dial("SIP/01-512c",

Getting module_request errors from SELinux. Errors being thrown by metacity sendmail.postfix cleanup trivial-rewarite local postdrop pickup All errors are essentially the same System was working well until I began to apply some basic security hardening configuration. Postfix started complaining when I made /tmp noexec, nodev, nosuid, and then did a mount --bind of /var/tmp under