similar to: Problem with asterisk and aastra phones

We are installing Aastra phones (480's and 57i's) into a fairly simple asterisk setup. Although call park & pickup work fine using xfer to 700 (to park), dial 701 (to pickup), we are unable to make the park/pickup softkey feature work on the aastra's. Although we've programmed the softkeys per the manuals, they seem to have no effect (just dead). For example, our 57i is

Hi Everyone, I am running DD-WRT on a router that feeds about 30 Aastra 6753i. The phones occasionally go into "No Service" mode. The POE switch doesn't seem to be the problem as it's tested fine. I think the router sometimes gives up and comes back quickly. Or something of that nature. However, the connections are maintained if a call is going on because there are peer to peer

I am using Realtime on Asterisk 11.5 with a SQLite3 backend. While everything seems to be working fine I keep getting this error on my log files: [2014-02-17 19:55:18] WARNING[20569] res_config_sqlite3.c: Could not execute 'UPDATE "sip_buddies" SET "ipaddr" = '192.168.2.23', "port" = '5060', "regseconds" = '1392692118',

Does anyone have Shared (bridged) Line Appearance working in Asterisk 1.4? Specifically with the Aastra 55i. Specifically, I am using the Aastra 55i with the expansion module. We want to see if other handsets are being used. (BLF) Getting BLF to work would be a great start. It sounds like setting up the hints properly will achieve this. right? Not totally sure how this should be configured.

Sorry for being a little off topic, but I'mconsidering a few new phones for my Asterisk installation. I have a mix of Polycom 500/600s and an Aastra 480i CT. I'm considering adding a couple of Aastra 57i or 57i CT. Does anyone here have experience with the 480i CT and the newer 57i CT? I'm curious as to the real differences. Thanks, Michael Graves Sr Product Specialist Pixel Power

Hello my friends... Currently we are using the following firmware versions on ours aastra 55i: Firmware Information Attribute Value Firmware Version 2.1.0.2145 Firmware Release Code SIP Boot Version 2.0.1.1055 Date/Time Jun 20 2007 06:20:29 Can we make a firmware upgrade to the latest one: 6755i (55i) SIP, V2.5.3.18, January 2010 , English , ZIP , 2,849 KB on the site:

Hi, What are the main differences between Aastra SIP phones 6730i and 6750i series ? Aastra corporate web site mentions : "The Aastra 6730i Series offers exceptional features and flexibility in an open-standard enterprise grade IP telephone" for one "The Aastra 6750i Series offers features and flexibility in an open-standards based, carrier grade IP telephone." for the

I recently tried to update my Aastra 57i to version 3.2 and ran into a problem. It won't properly register and says "contact mismatch". I added "sip contact matching: 2" to aastra.cfg, but that didn't help. When I look at the SIP trace, but I see is the Aastra sending a REGISTER and Asterisk replying with the 401. The phone then sends the REGISTER again, this time

I upgraded my office server from 1.4.22 to 1.6.0.5 on the weekend and after some testing there seems to be a compatibility problem when using Aastra phones. With 1.6.0.5 all incoming calls to all Aastra phones were dropped after a minute or so. I installed 1.6.1-rc1 and now the newer Aastra phones (5xi) work properly. The problem remains with the older phones (9112i, 9133i and 480i). If I dial

Hello All, I have a need for a wireless solution and have been looking at the Aastra 57i CT phone that have the wireless handset with them. Aastra says they will cover "up to 300,000 square feet". I am finding this hard to accept. I was also wondering about the "secure WDCT cordless technology" Could this be a form of DECT? Any one using these that can shed some lite?

Hi, Has anyone had experience with the Aastra 57i / 57i CT phones? The problem I'm having is that the phone isn't re-registering itself with the Asterisk server. As a result, the phone loses the registration with the server and is no longer able to receive incoming calls. Outgoing calls work fine. Right now, I have the following sip registration settings: sip registration period: 180

Hi Everyone, We use the top buttons on Aastra 55i to login and logout from Queues. This is the order: Button 1 = Login to English Queue Button 2 = Login to Spanish Queue Button 3 = Logout of English/Spanish Queues There are indicator LEDs on each of these buttons. Is there anyway we can send a SIP request or some other communication to get the Aastra 6755i phone to keep the LED for login set

Hi. Does anyone have a patch or workaround for the 50 BLF limit of Aastra phones? I have a couple 57i with the 560M console and only the first 50 BLF lines get registered. I am using the latest firmware from Aastra but I read that this limit was imposed because of a memory leak. Obviously my customer is complaining about these last 10 lines not showing their status. -- Telecomunicaciones

Hi, I'm a Polycom user who have just been trying out the Aastra phones. I`ve run into a bit of an issue. I cannot configure the voicemail dialout correctly on one of the two phones I am using, even if the documentation seems to state that it should work in the same manner on both phones. I have both a 9143i and a 57i CT. I`ve set both up with provisioning from config files. Both

Running asterisk 1.2.7 with latest zaptel on centos4.4. with Aastra 55i phones. Local outbound calling works fine, but ATT requires clients enter 7 digit code for long distance. All calls with 7 digit code are lost within 20 seconds of the call. This is the message I?m getting: Apr 19 12:38:16 WARNING[9615]: chan_sip.c:1228 retrans_pkt: Maximum retries exceeded on transmission

Hello all, Just wondering if anyone ever solved the Aastra 50-BLF limit when used with Asterisk (any flavour)? I know it's not strictly and Asterisk question - but I'm sure there's plenty of you out there using Aastra's on the end. Cheers, Andrew Thomas dCAP #1473

I have a 536i expansion module attached to a 57i-CT. The BLF lights on the 536i will light up and work fine for a while... however after a bit they seem to loose their ability to see if someone is on a phone. They still work to dial, if I try to dial, however, they don't light up when someone makes a call, or if their phone rings. If I reboot the phone, the lights start working again

Upgraded from 16.2.14 to 1.6.2.15 on Fedora 13, with aastra 9133i and 57i. On 9133i and 57i: #<extension># works for a blind transfer. Xfer<extension>Xfer doesn't! All this worked on 1.6.2.14. Nothing useful on cli, verbose 3, DEBUG. Here extension 169 answers an outside call, and tries to transfer it to 145 using the Xfer button: -- SIP/169-0000009c answered

I am currently testing a 57i unit. No problems configuring the phone's config via phone/web UI. We are trying to avoid using the web UI, the reason is it will take a long time typing the softkey xml applications URIs on each phone, so we chose TFTP. Tried configuring the phone via a TFTP config server, but no changes took effect. I wonder why it doesn't work with TFTP even if I was able

Hi, I'm currently trying to connect an Aastra 57i to our Asterisk Server. The strange thing is, that altough I have definitely entered the correct IP address of the server, the phone doesn't even attempt to register. Here is the configuration file (local.cfg) of the phone: firmware md5: dee6e938b469e217a87138076f47fe41 boot count: 1 tone set: Germany language 1: German time server1: