similar to: BLF and Asterisk 1.6.0b2

Hello We have recently upgraded our internal PBX from 1.4 to 1.8. This made the BLF lamps on our Polycom phones stop working. After a lot of googling and a lot of testing, I have been unable to find a solution. I did try to change the call-limit value from 4 to 1, and this actually made BLF work (noone suggested this, and what documantation I can find states that this option is deprecated). This

Hi I need to set the number of incoming calls to one, but the outgoing calls should be unlimited. I think the busylevel parameter is for it(incoming calls), but not works. My config is: cat sip.conf [general] [template](!) qualify=yes cc_agent_policy=generic cc_monitor_policy=generic call-limit=2 busylevel=1 callcounter=yes subscribecontext = hint allowsubscribe=yes [100](template)

I am running 1.8.3 and my BLF lights have stopped working. The hints appear to be intact when I use core show hints. But none of the phones are getting the BLF updates. This has happend in the past and I have had to restart my server. What could be causing this to occur. It did not do this with the 1.6.x builds. Is there a way to reload the hints or force a refresh without re-starting

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I must be missing something here but I can't figure out why I can't get DEVICE_STATE() to give me anything other than "NOT_INUSE". I have two extensions: 6666 and 6668. I used 6668 to make a call to yet another phone, so I know that it's busy. I then use 6666 to call 6668 and in the dialplan have a noop to see what

I need to set up the sound card of a server to use in an overhead paging system, as normal I am testing this on my home machine first (which has slightly different Hardware). I'm using chan_alsa with the Intel HD Audio driver on an Intel 82801G (ICH7 Family) sound card. I am running Asterisk 1.4.17 and have a fully loaded TDM400P as a timing source. When calling console/dsp (using

Is there an advantage to having a Queue members URI in the form: SIP/User (or indeed IAX2/User) Over Local/<number>@context ? I know that the latter will allow you to do things like set counting logic etc. through dialplan operations, but the former appears to be a more direct route to calling the party. (and if need be, there is the ability in queues to run a script on connection iirc).

Hello again! I just got a SIP account and it seems - from a config on the net -, that I've configured it correctly. But I get no call to the outside. Registration was OK. I tried: channel originate sip/1/echo at iptel.org Application ... I see the channel active for a while, but no call gets established. In my config I have defined the section [iptel] for the outgoing call and I

Greetings, I've noticed a problem that might originate from my Asterisk configuration, could use a hand in sorting it out. Problem is a 488 response from Asterisk whenever it gets RTP/SAVPF profile in the SDP. My current setup has Asterisk Kamailio realtime integration, and Kamailio uses dispatcher to route calls for Asterisk to handle. Now I have only one Asterisk, on the same machine as

Hi, We have a user who is putting large call volumes through Asterisk, and wants to BLF monitor up to 90 extensions. We are struggling to find a handset that can keep up with Asterisk :) 1) Is there a handset that will do this? 2) Is there a different (standard) way to send BLF and allow directed pickups? 2a) Or even a handset specific way? Asterisk handles the BLF volume fine, even on quite

Hello Is het possible to assign blf to a misdn channel? I want to watch the status of my external misdn channels on a linksys 962, e.g. green = available , red = in use and as an extra I want when I press the blf use the external line or when busy i want to barge in that call. Did somebody do this before?

I know I must be being daft, but is there a way to set which context the queuing system uses when it dials the operators/agents? By default it appears to use the default context. I've looked through voip-info.org and can't find anything, someone please put me out of my misery.

hi all, how to set the caller id facility for the TDM400p card. Please help me thanks, sandeep.s ----- Original Message ----- From: <asterisk-users-request at lists.digium.com> To: <asterisk-users at lists.digium.com> Sent: Tuesday, January 15, 2008 3:09 PM Subject: asterisk-users Digest, Vol 42, Issue 51 > Send asterisk-users mailing list submissions to > asterisk-users at

I have a Sipura 962 endpoint on Asterisk 1.4 where the MWI works perfectly, however my theory is that it should be broken. Obviously I'm wrong but "Sip show subscriptions" does not show the endpoint subscribing to the MWI status on Asterisk, even though all of the other endpoints on the system DO subscribe for their respective mailboxes, including SNOM & Polycom endpoints.

Ok I now have the basics for dynamic parking working but for some reason when a caller calls in and is parked with a transfer the return call dials the sip peer of the caller and not hte peer of the last party that parked the call. Anyone have any ideas on this? Also when a call is transfered to a parking space. the caller hears the space number. How can I stop that as well? Thanks Bryant

Does anyone know why when calling out with an ATCOM AG-188 registered with IAX (haven't tried SIP), there is no ring. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070222/a4f29a97/attachment.htm

I am inquiring about setup of the SWAT utility I have installed Red Hat 7.0 with samba installed during the initial setup of Redhat. I have two network cards installed in my Server and I am connected to the internet via a Cable Modem. When I try to start SWAT netscape displays the message that it cannot find the local host on port 90. I have downloaded the book over samba and I have also tried to

I have an asterisk 1.2.9.1 machine with zaptel 1.2.6 running. On the TDM400P, I have 1 FXS port and 3 FXO ports. dmesg reveals: Zapata Telephony Interface Registered on major 196 Zaptel Version: 1.2.6 Echo Canceller: KB1 PCI: Found IRQ 10 for device 01:01.0 PCI: Sharing IRQ 10 with 01:05.0 Freshmaker version: 73 Freshmaker passed register test Module 0: Installed -- AUTO FXS/DPO Module 1:

I have been seeing this problem for a long time and it occurs in 1.4.0b2 (as well as 1.2.0-1.2.12.1). If the internet connection is lost and I have SIP services that require me to register, any SIP devices attached to the system stop working. I have an IAX phone connected to one of my servers that I've been having this problem with which will work fine (and filover to the PSTN) the

I'm finally migrating from the 6/7/05 CVS version to 1.4. Had quite a run, I have to admit. Asterisk itself only segfaulted once or twice, but the dns issues have been bothering me. And the box just needs to go. Everything is going on a Ubuntu 6.06TLS server, that's been perfectly stable. I had 1.4.1 installed and running, but not configured. Yesterday I upgraded to 1.4.11,

Hello, I hope you are all doing well and thanks in advance. I need to program a transformation of a set of llvm bitcode to have some various techniques woven in. In particular, I need to resolve a given computed target address to one of several in the same way that the function of a dynamic library is resolved, but I need this resolution to happen in the binary target of my choice where I tell