similar to: I am having a problem connecting my X-Lite to my Asterix box

Hi there, We have plans to install an office (not call center) with the following setup: 200 linksys 942 phones (sip + g711) on a LAN a server with a dual port E1 sangoma and a remora card with 4 fxo modules. So far when we want to setup a linksys phone, we need to use the http interface of each phone, disable/enable a lot of things and plug it into the network. this is not the best scenario for

Hello all, I am running Asterisk-1.4.5 on my Debian GNU/Linux Etch here and I want to send the voicemails as attachment to e-mails and delete the voicemails from my PBX once it has been sent. But, I don't have a running MTA here even on the PBX itself. I just want to send the e-mails to my GMail account from my PBX. Can I just use the mail or mailx command to send the e-mail and attach the

Hello all, It used to work on calling my GTalk ID from another GTalk user. But now that I tried calling it again, the caller hears only a ringtone and disconnected after a few rings. The messages on my Asterisk-1.4.21.2 are the following: [Jan 29 10:37:51] ERROR[1303]: rtp.c:1945 ast_rtp_new_with_bindaddr: Unexpected bind error: Cannot assign requested address [Jan 29 10:37:51] WARNING[1303]:

Hello all, I've been lobbying for some time at the #asterisk IRC channel. Until now, I still can't find a solution to my one way audio problem. I rebuilt the Asterisk-1.4.21.2 from the Debian Testing repository on my Debian Etch. I got a Digium TDM400P with 1 FXO (channel 4) and 1 FXS (channel 1). My SIP extension phone located inside the LAN is a SNOM 300 IP phone. This one way audio

Hi Guys, I know no doubt this has been covered on the list a zillion time before, but can anyone point me to some good resources on using Asterix as a VoIP gateway? I would like to get two TDM400P cards in two machines attached to separate adsl connections (in two different physical locations). I'd then like to be able to plug POTS telephones into each of them (I understand I will need FXS

Hello all, Where can I find a list of description for each sound files provided by the asterisk-sounds-main Debian package? You can find the contents of my /usr/share/asterisk/sounds/ directory at http://paste.debian.net/33679. Thank you in advance. GNUbie -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I've been having some problems with my internet connection, it cuts out for aprox 30 seconds at a time and after that i have to do a reload in asterix for it to re-register my sip account with broadvoice otherwise it won't accept any connection till i reload, is there a way for it to automatically re-register or am I missing something else ? Thx. Armand

New to Asterix and perhaps someone can help. The plnned configuration is that the Quintums are to register to the Asterix and the signalling to be handled by the Asterix but the media (G 729 code) to be directed to the service provider. Thanks Shaun

Hello all, I'm planning to create a simple Auto-Attendant (IVR Menu) for my home PBX yet all callers from incoming (trunk) calls must only press the extension numbers from the [analog-ext] else will play the "pbx-invalid". How do you do that using the GotoIf() (or probably using the other applications) but will check if the numbers entered belongs to a specific context? Also, how

Hi, I would like to set up a high density FAX/PBX server, am looking at using Eicon Diva E1 card with Asterisk and Hylafax sharing channels, is this possible. I know Extensions can be reserved for voice OR fax with the combination of chan_capi used for * voice, capi4hylafax on fax but then channels must be dedicated rather than shared ie. would like to be able to answer voice/fax on same DID.

Hello, just recently I totally dumped my windows totally. Now I would like to install a few games for my boys with wine. I'm a newby to wine (generally I'm really satisfied with Linux alone), so - where can I get help in general, and for the two games in the subject line especially? Thank you in advance for any help, Martin --

Hi All, I have an Asterisk IP-PABX which I need to make the H323 channel up with an SBC (ACME). Does anybody have any example configuration guide for this? I am really really new with Asterisk, well PABX in general. So any help will be really appreciated. Thanks in advance. Kr, Sema ARCA -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi everybody !!! I'm a french student working on an Asterisk's projet . I think it's very easy for you : configure 2 CISCO 7910 and Asterisk in order to make call between both. (Scuse for my poor english ;) ) I have install Debian and Asterisk thanks to the CD Xorcom Rapid. I have set-up DHCP and TFTP servers for the IP phones. On the tftp, i have put the *.bin files for my phone,

Dear all, I just installed asterixnow, but no graphical interface start automaticaly neither linux nor some other, just command line. Shall I do something or shall I install something more ? Many Thanks in advance for any help. Giancarlo -------------- next part -------------- An HTML attachment was scrubbed... URL:

I want to add a server of VoIP under my server, but I don't have de doawnload and i don't have the tutotrial. please help me -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20081022/47da91cd/attachment-0003.html>

Hello, I'm attempting to get Asterisk running for the first time in my company. As I've never used it before, I am creating a small testbed with which to learn Asterisk and get the kinks worked out before attempting to roll it out. I have * compiled and running, and built the sample config files as suggested by the Wiki. I got my Snom 190 configured to use DHCP, and have created an

Hi , I am a newbie with Asterix and not sure if Asterix is a right tool for my needs. Let's suppose this scenario : I have a telephone line in one office( all calls are paid to telephone operator). In other offices I have only internet connections. Is it possible to use Asterix so that I can make telephone calls from ALL offices( without direct telecom connection) ? if so, what telephone

Hello Since I got the IBM Netvista to boot Linux, and am still waiting for the Compact Flash cards that I ordered, I was wondering if someone knew of an Asterisk distribution that can run on that kind of diskless host? I've taken a look at AstLinux and AskoziaPBX, but they both seem to be meant to be installed on a solid-state medium instead of RAM. For instance, the Netvista is unable to

Hello all, Is it possible to store, read and write configuration files in an SQLite3 database instead of using the configuration files inside the /etc/asterisk/ directory? If it is then can you point me to the right documentation on how to do this or probably hints on how to do this? Thank you in advance. GNUbie -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, when trying to start Asterix XXL with wine, I get the following error messages: fixme:d3d:IWineD3DImpl_CheckDeviceMultiSampleType Quality levels unsupported at present fixme:d3d:IWineD3DDeviceImpl_GetAvailableTextureMem (0x1a5738) : stub, simulatin g 64MB for now, returning 64MB left fixme:d3d:IWineD3DDeviceImpl_SetSamplerState sampler 7 type WINED3DSAMP_MINFILTE R(6) is out of range