Displaying 20 results from an estimated 2000 matches similar to: "interconnecting an asterisk server with an old alcatel PBX through a Digium B410P"
2009 Aug 14
2
onnecting two asterisk using B410p BRI cards
Hello all,
I'm trying to conect two asterisk servers using two B410p Digium
cards. One card on each server. I just setting up the first BRI port
on server A as nt_ptp and the first BRI port on server B as te_ptp.
I use an ethernet wire to connect the first port of server A (nt_ptp)
with the first port on server B (te_ptp) but the port light cotinues
blinking on red on both sides once the
2007 May 25
0
Asterisk to Alcatel 4400 via PRI: analog extensions work - digital do not
Hi,
I followed the how-to from
http://www.alcatelunleashed.com/viewtopic.php?f=44&t=840
All works fine except for Asterisk->Alcatel calls.
Actually, calls from Asterisk to analog extensions on
the Alcatel work.
However, calls from Aserisk to digital extensions on
the Alcatel 4400 do NOT work.
I get this error in the Asterisk log:
-- Executing Dial("SIP/4053-0823dd48",
2007 Aug 03
0
B410P echo cancellation
We own an Asterisk box with the following configuration:
Linux Debian 4.0
Kernel 2.6.18
Asterisk 1.2.23
Zaptel 1.2.19
We installed a Digium B410P card, and we are using 3 ports in te_ptp mode
(it is connected to BRI adapters on Italian ISDN lines, provided by Telecom
Italia; in Cisco language, they should be "isdn switch-type basic-net3").
Configuration strictly complies the
2007 Jun 14
0
b410p
Hello, I'm trying to set up a b410p rdsi card, and I'm having problems
getting it up.
I followed the instruction on asteriskguru and everything seem to be fine
but all leds on the card are in red.
[root@rdsipbx ~]# uname -a
Linux rdsipbx 2.6.15.7 #2 Tue Jun 5 16:37:07 CEST 2007 i686 i686 i386
GNU/Linux
[root@rdsipbx ~]# dmesg |grep Digium
HFC-multi: card manufacturer: 'Cologne Chip
2009 Jan 05
1
B410p, Ast1.4, France Télecom Numeris Double T0 problem
Hi.
When I call my RNIS numbers (with a mobile phone for example), I can
see 2 incoming calls on the IPBX, which should not happend.
I'm not sure if it's a problem with the telco France Telecom and their
ISDN setup, or if it's a problem
with the MISDN driver on the IPBX itself.
I'm stuck ...
Any advices for troubleshooting that?
Someone provide working configuration files
2006 Feb 13
2
Alcatel 4200 series pbx
Hi,
Does anyone have any experience connecting asterisk to alcatel 4200
series pbx with bri cards?
Does it should work with asterisk bri in NT mode, and alcatel bri with
TE mode?
Cheers, Igor Neves.
2008 Jan 07
1
no outgoing calls with Digium B410P
Hi all!
Sorry for my poor english, i'm italian.
I installed Digium B410P on my asterisk server. I followed the official
installation instructions found on digium site. These instruction, in my
opinion, are not clear, so i tried with other ways (found on the trixbox
site). I found this:
http://www.trixbox.org/forums/trixbox-forums/trunks/howto-install-script-digium-b410p
Now i can receive
2005 Jun 08
0
Asterisk and Alcatel 4200 PBX
Hello list.
I'm going te explain my trouble.
I have my asterisk with a TDM400P with 4 FXS channels. Two ports are
connected to a Panasonic PBX (it's working fine), and others two ports
are connected to an Alcatel 4200 PBX (but it doesn't anwer). I connected
to a CO port (where i had a pstn line).
When I call to the Alcatel PBX, the asterisk show me in it console that
es ringing but
2006 Jan 09
0
zaphfc and T0 ISDN to Alcatel PBX
Hello,
I have the following problem with HFC card and Alcatel PBX 4400:
- I want to connect Alcatel PBX and Asterisk with HFC card
(zaphfc driver 1port S0/T0 interface card)
- BRI line is configured at PBX to T0 trunk
- In asterisk I have loaded zahfc driver in NT mode and also set in
zapata.conf NT mode, point-to-multipoint.
- I am using cross "isdn" cable to PBX
-
2006 Apr 26
2
2 analogue ports on an Alcatel PBX patched to 2 FXO ports on my *
Hello,
I have 2 analogue ports on an Alcatel PBX patched to 2 FXO ports on my
<mailto:*@home> *@home 2.8 running on top of CentOS. Both FXO Ports are on
ONE Digium card.
What I would like is:
If someone calls extn 281 on my Alcatel PBX it is routed through to Extn 233
on my * thruogh FXO port/module 4
If someone calls extn 282 on my Alcatel PBX it is routed through to Extn 234
on my *
2006 Nov 01
0
Need help connecting Alcatel 4400 PBX to Asterisk
Hi there
I have a TE110P card fitted in my linux box running :
Linux version 2.6.9-5.ELsmp (bhcompile@decompose.build.redhat.com) (gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)) #1 SMP Wed Jan 5 19:30:39 EST 2005
I followed the installation steps on digium website...no errors reported.
The modules seem to have loaded...here's what lsmod shows:
Module Size Used by
2005 Aug 23
1
Asterisk & Alcatel PBX
Hello everybody,
I just buy a X101p clone and i'm new in asterisk.
Here is my configuration :
ISDN line ---- Alcatel ----PSTN ext 68-----Asterisk with X101p clone
------sip phone ext 200 - 203
|||
ISDN phones ext 60-67
>From sip phone to ext 60-67 it works. 9+extnumber
>From sip phone to Land lines it works. 9+0+phone number
>From ext
2007 May 28
2
Alcatel - Asterisk setup
Hi all:
We are looking for someone with experience in Alcatel PBX - PRI -
Asterisk integration
Please get in touch off list.. We're wanting to hire a professional
subcontractor, developer or company to get around some issues like these:
Asterisk shows PRI to Alcatel is up, but when trying to dial from
Alcatel to Asterisk results in a disc tone
(Asterisk do send calls properly into
2006 Nov 09
2
Alcatel trunk with asterisk problem on dialing digit-by-digit
Hi guys,
I have an Alcatel 4200 with a ISDN board pluged in the asterisk server with
TE110P.
Input calls
VOIP Proider ---> Asterisk ---> Alcatel
Output Calls
VOIP Proider <--- Asterisk <--- Alcatel
In alcatel phones, users should dial 2 for take a line tone and can dial. At
this point start my problems:
1. When users dial 2 on phone (alcatel) they don't received a dial tone,
2010 Dec 23
1
OT - Alcatel OXE IP trunking licence price
Hello,
For a prospective customer, I need to evaluate the cost of an Alcatel OXE IP
trunking licence price.
The setup would be:
PSTN -----<E1>---- Alcatel ----<SIP>----Asterisk ---------- SIP Phones
At the moment, only a couple of simultaneous calls are needed between
Alcatel PBX and Asterisk but later, this number
will grow.
2007 Sep 07
0
Connecting Asterisk to Alcatel OmniPCX
Greetings list,
I've been asked by someone to help them set up a SIP link between an asterisk system and an Alcatel OmniPCX (v6 software). The asterisk bit's fine, but I know nothing about the Alcatel except that it does apparently allow the setup of SIP trunks.
Does anyone have experience with the Alcatel unit? Any obvious pitfalls to watch out for? Any suggestions gratefully
2009 Aug 13
1
Help for Alcatel asterisk
Hello everybody
I have an asterisk with an integration of alcatel pbx, by sip trunk, all
calls are fine, but tha calls calls that originate from a analog line,
the recipient is not listening, and that if they hear the call originates,
the lines are E1 in alcatel pbx.
When a asteris user call to analog line the call is ok.
Everyone, has been that problem?
I change asterisk version 1.4.21 to
2006 Apr 05
2
legacy Alcatel 4200/4400 and Asterisk (QSIG/PRI) and callerid
Hello,
I have connected asterisk box with legacy PBX Alcatel OmniPCX 4400 (and also
another * box connected to A4200).
These PBXes have function to assign name to extensions and display it on
phone.
Asterisk box is connected via PRI with euroISDN signalling (also I have tried
QSIG).
Is it possible to set callerid with name and display it on alcatel digital
phones? With command SetCALLERID
2005 Feb 15
2
Asterisk Integration with ALCATEL 4400
Does anyone have any input into integrating asterisk with a alcatel 4400 PBX.
Acording to what i've found is that Alcatel uses R2 for E1
--
regards
Vikram (http://www.vicramresearch.com)
2006 Nov 27
5
Trunk Alcatel - Ring problem and call disconnection
Hi guys,
Recentlly i did a asterisk gateway and use it with an alcatel pabx. All is
working, i have only two problems.
1. When call incomming to asterisk, it forward to digium card to PABX
Alcatel. The user that start the call can't hear the control tone of ring
ring ring. Tha calls stay without sound until the called part answer the
call. At this point, conversation follow normaly.
2. When