similar to: chan_mobile and W300i

Hi, I'm trying to setup a mobile (ericsson W300i) and I'm having some difficulties (to pass DTMF through the mobile and to get sound). I'd like too know how could debug what are the common way to debug get information. remote mobile => mobile on asterisk (by bluetooth) => asterisk I'd like to be able use password on asterisk. I tried and looks likes DTMF is not passing

Hello all, I'm having a quite simple configuration like: SIP provider <=> asterisk SIP <=> lan Everythings works fine but sometime I can't get incoming call. here are some of the logs from set debug 25 set verbosity 25 sip show debug and sip.conf and a part of extension.conf thanks in advance Reliably Transmitting (NAT) to 212.27.52.5:5060: OPTIONS sip:freephonie.net

Hi, I tried to use chan_mobile with an ericksson w300i with no chance (few audio unresolved problems). I'm planning to get a new mobile in order to use it with asterisk. I'd like to use it with chan_mobile. I'd like to hear successfull or unsuccesfull experience from some user in order to choose my next mobile. I also heared about chan_celiax but I think it needs to cable and it

After a migration to asterisk 1.6, I don't receive sip incoming calls anymore. As fas as I understand the SIP debug traces, my server receives the request and reject it: ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ <--- SIP read from UDP:212.27.52.5:5060 ---> INVITE sip:s at 192.168.4.2:5060;transport=udp SIP/2.0 Call-ID: 25151-WW-0eaf098b-2f615ac60 at

Hello all, I've been using * for quite some time and yesterday I decided to add sipbroker to my config. It was pretty simple and it works for some numbers (e.g. I can call *258-9123, UK date & time - which is on the "phone numbers you can call" page -) but fails for some others. For example I've got a friend who's at freephonie so to call him, I would dial

Hello I'm trying to add a VoIP trunk to Asterisk, but I'm getting the following warning in the log file if I leave "srvlookup=yes" in sip.conf (OK if I comment it out): -------------- Nov 27 16:40:22 NOTICE[29660] chan_sip.c: -- Registration for '087077XXXX@freephonie.net' timed out, trying again (Attempt #47) Nov 27 16:40:22 WARNING[29660] chan_sip.c: No such

Hi people! I installed Asterisk (from Trunk Asterisk SVN-trunk-r76213) and the chan_mobile for to use Asterisk + Bluetooth. My Asterisk has dialed normally ( Dial(mobile/mycellphone/99999999) ), but I don't have audio. Someone can help me? Thanks Moacir O. de Souza Junior Belo Horizonte - Minas Gerais - Brasil -------------- next part -------------- An HTML attachment

Hi all, I receive this error while compiling chan_mobile: gcc -g -c -fPIC -fPIC -o chan_mobile.o chan_mobile.c chan_mobile.c: In function `mbl_load_config': chan_mobile.c:1745: erreur: trop d'arguments pour la fonction ? ast_config_load ? make[1]: *** [chan_mobile.o] Erreur 1 make[1]: Leaving directory `/usr/src/asterisk-addons' Does anyone know what's the problem? --

Hello, I just did a fresh svn install of 1.4 trunk everything. Everything compiles and installs just fine. When I get to asterisk-addons, I cannot select chan_mobile in menuselect. Chan_mobile is not even an option in menuselect for asterisk trunk. I tried the latest patch which failed in many places but did add an option for chan_mobile in menuselect for asterisk but it still cannot be

I have been looking forward for months to get chan_mobile working. I am limited to using prepackaged Asterisk code, mostly Trixbox. I have recently heard that chan_mobile is considered 'beta' and there is no effort to move it into the main code of Asterisk. Not even for Asterisk 1.6. So what is the future for chan_mobile? It is easy to make a very strong case for a cellular trunk.

Hi, I have configured a certified asterisk 13 server with chan_mobile and res_pjsip. I have a Cisco 7940 hardphone and I use ekiga as softphone client. Now the problem is, using the hardphone I'm able to call the softphone and hear everything properly. But when I call from the hardphone to some number that has to be dialed via chan_mobile, I'm not able to hear what the other side says (I

Hi, I've been looking at the list at: http://www.voip-info.org/wiki/view/chan_mobile But when googling of any of the "known working" devices, there ain't any for sale anymore, probably replaced by more recent types. So, anyone around here who bought recently an BT-dongle that is working with asterisk? hw

Hello, I recently updated my asterisk-addons-1.6.2 to the last revision and I have this problem that I don't know how to interpret, bug or not. I connected a Nokia N80 phone to use chan_mobile and everything works great until the phone starts getting disconnected after the call finished and sometimes during the call attempt. Is this a bug or a possible known issue for Nokia phones? # rpm

Does anybody know if i can make (chan_mobile) module to be installed and work with Asterisk 1.4.19 ? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080513/57510b8a/attachment.htm

Hello all, I have successfully paired my mobile with asterisk, and chan_mobile already run very well, but sometimes when i restart asterisk chan_mobile fails to initialize with the error: chan_mobile.c: Incorrect voice setting for adapter toshiba, it must be 0x0060 - see 'man hciconfig' for details. I have tried several bluetooth adapters, as well as setting Class in

Greetings chan_mobile users, I have just merged my refactor of chan_mobile into asterisk-addons trunk and now the code needs testing. The changes I have made should improve the stability and reliability of the code and should also improve audio quality. Error reporting should be improved as well. I have tested most of the code with my blackberry device, but I need more people to test the code

Hello list, I recently started testing the chan_mobile addon and after a successful installation and configuration I have a couple of problems that I can't fix without your help. I am using opensuse 11.1, asterisk 1.6.1 with bluez 4.22 (installed from rpm packages) and a Nokia N80 phone. Apparently all works fine except the DTMF. Seems impossible to catch DTMF when nothing (no song) is

Any tip on where to find install doc on chan_mobile ? <http://www.chan_mobile.org> Thnak you! HB -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090911/ba08c4a4/attachment.htm

Hello, I read on the wiki that chan_mobile supports one device per dongle. Is this still the case?

Hi all, does anyone know of an application that will run in Windows (in my case users PC's) and behave in a similar fasion to chan_mobile? I'd like the app to register with asterisk, then talk to a (or a number of) mobiles over bluetooth thus creating an FXO port? I'm not interested in SMS etc. just voice. Thanks in advance Ray. -------------- next part -------------- An HTML