similar to: VOIP Provider wooes

Can anyone tell me why my inbound calls keep getting rejected with 401? Here's the debug information: <--- SIP read from UDP:147.135.32.221:5060 ---> INVITE sip:6087294351 at 216.26.109.22:5060 SIP/2.0 Call-ID: 31007e-31 at 147.135.32.221 CSeq: 1 INVITE From: "Wi M"<sip:4144038968 at 147.135.32.221;user=phone>;tag=9bbc To: "Gregory Malsack"<sip:s at

Does anyone have any first-hand experience with the Zoiper Business version softphone? If so what has been your experience with it? Thanks, Greg -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090408/f6d5af5a/attachment.htm

Hello All, I have a need to connect an analog device to an asterisk server. The analog device has 4 analog lines going into it (it?s a fax solution). The fax solution answers the analog call, then listens for dtmf. The dtmf code that is played tells the fax device what email address to send the fax to. All calls on our system come into the server through a PRI. The faxes come in over a PRI,

> Hello All, > > History ~ > I recently took a position with a call center. At the time they had > about 50 agents in a call queue. The queue was setup to ringall. The > agents use Eyebeam softphones. Everything is local lan, no routers, > everything connected via Cisco 3600 10/100 switches. > > Now we are up to about 150 agents, and I have kept everything pretty

Does anyone know how much space the appliance has for voicemail and/or logs? Doesn't have an embedded disk from what I can see, and only a 1G flash card? -- Barry D. Hassler President, HCST http://www.hcst.net/ 937-427-9000 -------------- next part -------------- An HTML attachment was scrubbed... URL:

Since Thursday evening my asterisk box has been failing to register with broadvoice. I haven't changed any of my config files in the last week. Can anyone suggest anything? Asterisk is reporting: *CLI> Aug 28 16:15:17 NOTICE[6150]: chan_sip.c:3914 sip_reg_timeout: Registration for '703XXXXXXX@147.135.8.129' timed out, trying again -- Got SIP response 404 "Not found"

--------------- Hi, I got hit with a funny one today; my configuration, which had been running fine for many weeks, suddenly stopped registering with Broadvoice's SIP. I switched among BV SIP hosts, verified my account was OK, even tried upgrading Asterisk. The weird thing was that I could associate OK with my WiFi SIP phone. So it looked like an Asterisk- specific SIP interoperability

Hello; If I have load up to 220 extensions with 50 concurrent calls. Can one hardware server carry all this load? What is the hardware server required for this? Regards Bilal -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130714/b63756d2/attachment.htm>

Connecting to proxy.dca.broadvoice.com Calls all of a sudden cannot be completed. Cannot ping proxy.dca.broadvoice.com Changed to proxy.chi.broadvoice.com pingable, but now get the following: Got SIP response 500 "Internal Server Error" back from 147.135.12.128internal error Called Tech Support... get dead air then carrier busy signal. Anyone else having

Hello all, We recently configure an asterisk server to use with an VoIP provider to make calls to a PSTN. We use (voipjet, nufone, diamond....) We feel that we haven't got the quality that we hope. Sometimes our calls gets mute, or we feel communication cuts on our phone calls. We have got an QOS router (Draytek) reserving 1/2 of our wideband to the SIP an IAX2 protocols, and an ADSL line

I have configured asterisk with the AMP php configuration utility. I am able to make outgoing calls through broadvoice but incoming calls are sent to BV's Voicemail and never actually enter the IVR. When I show sip debug info through the asterisk prompt it actually reads the incoming call from BV but then issues a busy signal sending the call to BV's voicemail. I also modified

We have a basic application that runs a SIP channel to pick up a call and process it. We are using Broadvoice and it's been working great. We recently rebooted the machine and now when a call comes in Asterisk picks up the call but does not process it. Asterisk seems to send the call back to Broadvoice. Nothing at all has been changed in the configuration to warrant this. Below is the

Hey All, Growing call center. Currently at about 200 call center staff, running about 1000 calls per hour. Gearing up to double that. Not too sure that a single server will support that growth. So, I'm trying to come up with ways to scale the system and still maintain a simplistic design. So I'd like to bounce some ideas around. Currently I am running on a Dell 1950, dual quad core

After months of BroadVoice ignoring my trouble tickets for dropped calls, delayed termination, etc., I'm throwing in the towel. While they have credited $19.95 to my account, they refuse to credit anything more, despite ALL of the problems I've had. I feel the least they could do is credit the remaining $8.61 to my account, yet they won't. I haven't really been following up on

Hello, I am just curious how many people are hooked up with BroadVoice and have recently been experiencing a lot of dificulty. Joel

Like everyone else who used asterisk with broadvoice, my outgoing calls died last week. I made the appropriate changes, and now basic incoming and outgoing calls are working. However, I have a few call-forwarding rules that are no longer working. It's certainly no coincidence. I can dial to all these number directly, but the problem only appears when there is an incoming broadvoice call, and I

I am having an issue with the CallerID Number not being passed to my phone in the SIP packet. The CallerID Name is passed just fine and displayed on the phone with no issue. I have done a NoOp() in my extension.conf and successfully seen both the CallerID name and number correctly. So that leads me to believe that Asterisk is handeling it correctly. However, when I do a packet capture of the

Can anyone tell me what might cause callers on hold in a queue to drop into agents voicemail boxes? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071217/ae6cba5a/attachment.htm

We upgraded our asterisk server to 1.2.18 last night to pick up the security update. Since then, any calls coming in on IAX2 links get dropped if they try to enter a MeetMe conference room. The log shows this: Apr 26 08:33:16 NOTICE[27362]: chan_iax2.c:3167 iax2_read: I should never be called! Hanging up. I've temporarily worked around it by switching our inbound provider to use SIP

Hi Niv, Thanks for your comments. I'm CC'ing the patch author. On Wed, Aug 04, 2010 at 05:37:44PM +0200, Niv Sardi wrote: > Do we really need that many ? > http://www.google.com/codesearch/p?hl=en#5KTrgOW2hXs/pub/nslu2/sources/vsftpd-2.0.4.tar.gz%7CXknrlk4c3C4/vsftpd-2.0.4/ssl.c&q=SSL_CTX_set_cipher_list > > vsftpd seems to only be including "DES-CBC3-SHA" >