similar to: Two B410P cards in one machine

Hi. I have installed B410P in Europe and the cards works more or less ok. My question is what color should the LED's on the back of the card be when connected to the PSTN NT box? Is there anywhere some information on the expected LED color in any given state (idle, call active, cord unplugged etc.)? On my card the lights are shining Red(orange-ish) but flashing to green every now and

Hi. Using Asterisk 1.4.13 running on Ubuntu 7.04 with Intel CPU: 1) Not being able to build mISDN on Ubuntu using "make b410p" I have used mISDN-1_1_7 which seems to work ok. QUESTION: Should I expect this version of mISDN to work ok with these cards? Or is there a way to build using "make b410P" on Ubuntu? (make force does not help at all) 2) In some of our installations

Hi. Using Asterisk 1.4.13 running on Ubuntu 7.04 with Intel CPU: 1) Is it possible/supported to install two or more B410P Digium cards in one computer (single Asterisk installation)? 2) Do they need to be hard-wired together with a PCM cable like I've seen explained in some beronet manuals (although that was specifically geared towards their cards, I must say)? Thank you for your time and

I have a call coming in from Asterisk-A going to Asterisk-B where it's determined that the called party is in fact yet another number in Asterisk-A so a new call is created from B to A and the two calls bridged (by Asterisk) at Asterisk-B. Originating Caller ==> Asterisk-A ==> Asterisk-B ==> Asterisk-A Now, what happens is that in my case both A and B are on the same network

Hi. I'd like to get access to the CDR's generated by Asterisk (1.4) in real-time from a remote connection coming in on TCP. Basically what I have is a Windows application that is used to process incoming, outgoing and missed call records putting them into a database for some analysing etc. This app can connect to a TCP server and read from this connection the CDR's as they are

Hi, I'm installing Asterisk on Ubuntu 6.10 When I first compiled the zaptel package I used: make clean make make install So far so good, but the following command failed: make b410p I did some digging on google and found a guide on how to install it manually, but the result was the same. I got these files ftp.digium.com/pub/telephony/zaptel/b410p/misdn-b410p.tar.gz

Hello all, I'm trying to conect two asterisk servers using two B410p Digium cards. One card on each server. I just setting up the first BRI port on server A as nt_ptp and the first BRI port on server B as te_ptp. I use an ethernet wire to connect the first port of server A (nt_ptp) with the first port on server B (te_ptp) but the port light cotinues blinking on red on both sides once the

Hi, I'd like to know what's the most "popular" method for automatic fax/voice detection for incoming calls on mISDN cards such as the B410P (hfcmulti). I'm running: kernel 2.6.17 misdn 1.1.3 asterisk 1.4.21.2 B410P card I'm using iaxmodem and hylafax with asterisk (the setup works for zap channels). I've used the following options in /etc/asterisk/misdn.conf:

Hi, I've been able to make make install the Zaptel drivers (1.2). I'm using a b410p so I executed the following command make b410p. I tried this on multiple machines, but it always failes: root@asterisk:/usr/src/zaptel-1.2.11# make b410p [ -f misdn-b410p.tar.bz ] || wget ftp://ftp.digium.com/pub/zaptel/b410p/misdn-b410p.tar.gz --23:59:54--

The DAHDI docs actually include the 'steps' that used to be in Zaptel's 'make b410p'. These steps involve downloading and compiling mISDN. Why re-invent the wheel? Just a thought :-). As for the 100ohm termination bit - it's simply changing a couple of dip switches on the b410p card (as described in the manual). Andy -----Original Message----- From:

Hi, 1. Has someone met any success at all, connecting a Digium B410P to a Patton Smartnode 4638 (with latest 5.3 firmware) ? 2. If positive, then, which signalling was used on both sides ? My project's goal is use a Patton Smartnode 4638 to act as telco BRI lines, from a B410P-enabled asterisk box. In my testings, I can see channel is respectively up (with patton web server status page)

Hi list, we have a dual Xeon server with 2GB RAM running Debian Etch 2.6.18.4-686 kernel. The server has 2 B410P cards plugged in. No other card. We installed Asterisk 1.4 trunk with zaptel trunk, ran make b410p, the install mISDN1.1.0 (for bug 9064) configure and compile Asterisk with chan_misdn, all is fine. In misdn-init.conf we have added option=1,master_clock. Asterisk is up and

Hi, My set up is : Asterisk with B410P in NT mode <-------------cat5 straight cable ----------------> Another PBX in TE mode Is the 100 Ohm terminator you can find on B410P boards, necessary when connecting in NT mode to another PBX (set in TE mode) ? Cheers -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, Junghanns and BeroNet offer 8 BRI ports cards. Do you know if Digium's B410P has an inner TDM bus so that an 8 BRI ports subsystem (2 PCI slots used, but 1 one set of interrupts) could be made out of 2 B410P ? I know you could (theorically) do this with Junghanns and BeroNet cards. Cheers -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, My setup is: IPPhone1 --- Asterisk1 with B410P ---- Patton 4638 --- Asterisk2 --- IPPhone2 I want to evaluate Asterisk1 in TE/PtmP mode. So, Patton box is configured in NT/PtmP (with 3 BRI links between both systems). Anyway, asterisk -rx "pri show spans" keeps replying : PRI span 1/0: Provisioned, Down, Active PRI span 2/0: Provisioned, Down, Active PRI span 3/0: Provisioned,

Hi all! Sorry for my poor english, i'm italian. I installed Digium B410P on my asterisk server. I followed the official installation instructions found on digium site. These instruction, in my opinion, are not clear, so i tried with other ways (found on the trixbox site). I found this: http://www.trixbox.org/forums/trixbox-forums/trunks/howto-install-script-digium-b410p Now i can receive

Hello everybody, I try to install -Ubuntu 8.04 server- a B410P and a TDM2400P together with Asterisk 1.4.26-2, dahdi-linux-2.2.0.2 and dahdi-tools-2.2.0. Problem I face is the following one: CLI> module load chan_dahdi.so == Registered application 'DAHDISendKeypadFacility' == Registered application 'ZapSendKeypadFacility' == Parsing

I have the same problem as the following: http://threebit.net/mail-archive/asterisk-users/msg36602.html I am using a b410p (Wildcard) in TE mode on 4 channels of ISDN2e and it totally fails to detect incoming DTMF. The newer mISDN drivers have a parameter "dtmfthreshold" where you can tune the volume above which DTMF detection is initiated. However (I've tried it) the newest

We own an Asterisk box with the following configuration: Linux Debian 4.0 Kernel 2.6.18 Asterisk 1.2.23 Zaptel 1.2.19 We installed a Digium B410P card, and we are using 3 ports in te_ptp mode (it is connected to BRI adapters on Italian ISDN lines, provided by Telecom Italia; in Cisco language, they should be "isdn switch-type basic-net3"). Configuration strictly complies the

Hi, I've setup a trixbox 1.2.2 instalation with digium b410p. It uses misdn driver. I'm able to place calls and receive calls using this interface. One thing that happens is when i dial an a number from a sip client to an number that is routed through b410p and the called party rejects the call, asterisk doesn't detect the hangup. The sip client remains in ringing waiting for the