similar to: Receptionists Phone suggestions? (Not Snom370)

Hello Happy New Year to all!! I've just completed porting from Asterisk 1.2 to 1.4. I did this by doing a clean install on a new box, and moving over configuration and scripts where needed. All went surprisingly well! Anyway, one lingering issue is that the function key "lamps" on our Snom phones have all stopped working! We're using a mix of Snom 290/320/360 phones and

I'm looking for some ideas of people who have setup a sidecar (eg: Aastra 560M). Obviously it's handy for BLF (to see who's on a call)...but what else? Anyone want to share interesting things they've done with a sidecar? -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello all, I am using the Snom 370 phone with firmware Snom370-SIP 7.0.17* *connected to an asterisk 1.2.14 and I can't record any calls using the "Recording" button on this phone. The extension I configured on this phone has the values "Recording on demand", an the voicemail enabled. I am using FreePBX to manage my PBX. How should I configure the "Function

How I change my configuration to reduce this issue. I have this setting on my zapata.conf signalling=fxs_ks group=1 callgroup=1 pickupgroup=1 channel=1 signalling=fxs_ks group=2 callgroup=1 pickupgroup=1 channel=2; singalling=fxs_ks group=3 callgroup=1 pickupgroup=1 channel=3; singalling=fxs_ks group=4 callgroup=1 pickupgroup=1 channel=4 and for outbound calls I have this context on my

Quoth: OCG Technical Support <support at ocg.ca> > >Although we've programmed the softkeys per the manuals, they seem to have no >effect (just dead). For example, our 57i is setup like this: I had similar problems and ended up using the speeddial inband functionality. FWIW, my 57i's setup like so: softkey4 type: speeddial softkey4 label: "*Park" softkey4

Thanks for all the comments on the 3Com phones. Thankfully, there is a large number of phones out there to dig through looking for the right solution. What I have not been able to find, after spending all weekend looking, is a good solution for an attendant console. We have 2 receptionists that need to be able to view all 60+ phones (we could probably weed it down a bit if we had to,

Hi, i want to port an open-source project to sparc. I just downloaded OpenSolaris (sol-nv-b75-sparc-...iso), created an empty image for the hard disk, and tried to start qemu in a linux x64bit-host: qemu-system-sparc -hda test.img -cdrom sol-nv-b75-sparc-v1.iso -boot d -nographic The output says: Nvram id QEMU_BIOS, version 1 CPUs: 1 nvram error detected, zapping pram Welcome to OpenBIOS

I'm trying to keep the DND status of my Snom phones and the astdb in line but I'm stuck on integrating my gui DND button which talks to * using the manager interface (actually it uses Astmanproxy as the gui host is on a different network to asterisk and can't see the Snom's across the network). All's working fine in my Dialplan; when someone dials the code for DND-on or

A quick look over the memory reclocking part inside the maxwell mmiotraces kind of reminded me of the kepler memory reclocking, it looks for most parts the same. I didn't do a deep inspection so treat this with great care, but it seems to work at least on those maxwell gpus this was tested on. It depends on the PMU fixes for the fuc5 though, otherwise the PMU might not work as expected and

Samba Folks: I'm having what seems like a relatively benign issue with Samba 3.0.2a. I'm running SuSE 9.0 (with all updates) on an Athlon XP, 512MB RAM, RieserFS on SATA hard drives. Linux kernel version 2.4.21-202-athlon (from SuSE). I can repeatedly and predictably get the following error in the log.smbd file when connecting via Mac OS X. (smb://serverIP/) I get the same error

Hi, We are preparing to make the release of OpenSSH 4.8 soon, so we would greatly appreciate testing of snapshot releases in as many environments and on as many operating systems as possible. The highlights of this release are: * Added chroot(2) support for sshd(8), controlled by a new option "ChrootDirectory". Please refer to sshd_config(5) for details, and please use this

Quoth Steve Murphy... >Date: Mon, 12 Jan 2009 08:51:03 -0700 > >QUESTIONS: > >Which of the two would you see being useful to you? Obvious comment really but given LEG based CDR, one can determine the 'Simple' data but you can't work it the other way. I'd therefore find LEG based CDR more useful as the granularity (time on Hold, in Queue, Waiting on pre-xfer ring

I have two Asterisk systems that can route to each other via a VPN with firewalls disabled for testing purposes. Each Server can see (tested via nmap) UDP port 5060 on the other. So... I thought that I could simply use a Dial command in Server A's config to place a SIP call to Server B... but it doesn't seem to work. Server A (192.168.1.33) has: exten => *136,1,Dial(SIP/90 at

Have someone running fine Alert-Info with a Snom 370 ( System Information: Phone Type: snom370-SIP MAC-Address: 0004132661BD IP-Address: 192.168.10.170 Firmware-Version: snom370-SIP 7.3.14 14961) i've tried exten => 200,1,SIPAddHeader(Alert-Info:<http://www.notused.com>\;info=alert-external) exten => 200,n,Dial(SIP/${EXTEN},30) Can see into the phone SIP trace is

We have a tenant who has been having issues with a congested connection and in trouble shooting it we've noticed that there seems to be a lot of SIP traffic even when none of the phones are doing anything. We've determined that this traffic is mostly INFO packets generated by setting qualify=2000. I understand that 2000 ms is the default value for the qualification parameter but what

Is there a SIP header I can set (for Snom and Yealink phones if that's relevant) or any other mechanism to tell a phone to ignore a particular call from it's missed call list? I have bits of the dialplan that ring groups of phones eg: exten => 200,1,Dial(Sip/112&SIP/113&SIP/114) and I don't want such calls being recorded by the phone as a missed call. Calls to the

Hi all, I'm not getting any sidetone on my Snom 370. I searched the web and the snom wiki, but I don't see any place to enable/adjust it. Callers say I sound great on the other end, but I don't hear myself so it is a little off-putting. Any suggestions would be appreciated. On a related note, some times (maybe 1 out of 10 calls) I get the side tone, but its delayed by a second or

Hola! I have problems running Rcmd check (windows 98, R1.3.0) It ckoks on an example running a function which calla bringToTop(). This makes an error because Rcmd check runs the examples with the postscript device, and bringToTop does not make sense with that device. Howevere, my function is for interactive use, and needs bringToTop. How can this be used in examples and still have the

Hi folks, Is there a function to show the size of an R object? eg. in Kbytes? Couple months ago Bendix Carstensen posted this marvelous little function lls(), which shows all objects in the current workspace by mode, class and 'size'. This is a wonderful enhancement to the build-in ls() already and I now have it sourced in my Rprofile.site at startup. The only drawback is,

Hi, Quick question. With an old phone system a receptionist receiving a call has 1 button to push to transfer calls to a specific extension, with Asterisk, a receptionist would actually put the caller on hold, pick up another line, call the extension, ask if the person is available, hang up pick up the caller again and transfer. To me it's seems a long way to simply do a receptionist