similar to: Voicemail in 1.4?

Hey, all. I quoted a customer about $100 for some cheap SIP phones. I was planning on using the BT-102's, but he called said they look like "Princess phones," and I have to admit that he has a point. Some of the other inexpensive phones look decent, but (for example) the SPA-841's wiki entry says the remote end gets a lot of static. Since it'll be being used from a noisy

I'd *really* like to be able to have a call ring three different cell phones; then, if someone answers, they have to somehow acknowledge the call for it to be directed to them. That way, if one of the phones is off, or out of range, it doesn't go straight to that phone's voicemail. Asterisk 1.4 -- though I could probably upgrade. Suggestions on how to make this happen? Thanks!

Hi, all. I've done some Asterisk recelling, but recently got roped into a Sr. SysAdmin position. Our PBX is c. 1823, and -- well, as pretty much all circuit-based systems do, it sucks. It sucks to administer, moves suck... you know the drill. So, I'd love change to an Asterisk system. My boss, who loves to spend money for no particular reason, wants to go proprietary, though. So

Hi, all. I've got an old Telrad PBX with an Emagen(?) voicemail box. The VM box, itself, is beginning to show its age. Big-time. We're thinking it might be time to look for a replacement. I'd love to install Asterisk with an FXO card or something, but I don't think it supports whatever protocol legacy PBX's used to speak to VM systems. If someone can tell me I'm

Hey, all. Just wondering if there's a GUI out there -- preferably OSS, but I'll take what-have-you -- that a) can run on an Ubuntu/Debian box, and b) allows a receptionist to see what calls are in-process, and forward calls from their phone to somewhere else. Thanks! -Ken -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

Hey, all. I'm planning on migrating a W2K3 server to a Linux solution. It needs to be AD-aware, support ACLs, etc. This isn't something I'm doing Right Now(tm), so I can wait a little bit. A couple questions: 1) Are there any known issues with BTRFS? 2) Which version of Samba would be most appropriate for this? 3) AD integration: I've never really done it (with success); any

http://downloads.polycom.com/voice/voip/sip_sw_releases_matrix.html Howdy, all. What's the difference between "split" and "combined" firmware, which can be seen at the above link? I've googled to no avail, I'm afraid. Thanks! -Ken -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

Hey, all. Got an SNOM 820 in the other day to kick the tires. As with many phones, provisioning it was a bit of a PITA. The biggest problem, as far as I could tell, was that their firmware just doesn't seem that stable, and is sometimes hard to get to. - I managed to corrupt the firmware twice; fortunately, instead of bricking the phone, there's a fairly easy-to-use "rescue

Hi, all. I want to have a button on my receptionist's 601 that, when pressed, will forward her current call to a given extension. Is there any way to do that? I've tried to RTFM, but I'm coming up empty. Thanks, -Ken D'Ambrosio

Hey, all. I'm looking -- if possible -- for a decent, multi-platform soft-phone. Specifically, Linux and Windows; that way, I'll go through the same issues my end users do. I've noticed a couple (e.g., minisip, which seems abandoned, and sip-communicator, which, honestly, is probably a great IM client, but has a confusing interface for actual phone calls). So I'm wondering if

Hi, all. I've got a fax extension in my extensions.conf, but spandsp never sends my faxes there. Both applications -- txfax and rxfax -- are registered by Asterisk, so they compiled and installed correctly. I've got a Sangoma A104 card, and (as some people had suggested) have loaded ztdummy. Everything seems fine, except that it never gets recognized as a fax. I've even turned off

Hi, all. Got my Uniden UIP200 today (ordered from thetwistergroup.com), and was very excited to set it up... until I came to the realization that there were no docs with it whatsoever. There was, however, a sheet of paper with the stock warnings (don't use the phone in the tub, etc.), AND a URL -- for documentation. Score! Well, no. The URL it gave me, bcs.uniden.com, does indeed have

Hey, all. I was just wondering if there were any tools/utilities/what-have-you out there that would allow a user to click on a contact in Outlook, and have their phone dial it? (Or, I guess, have Asterisk dial both their phone and the destination number, and put the two into a conference.) Thanks! -Ken -- This message has been scanned for viruses and dangerous content by MailScanner, and is

It's just come to my attention that newer phones from both Snom and Grandstream support OpenVPN. Is this a new trend or something? Since OpenVPN, in one swell foop, deals with both NAT issues and securing communications, I'd be very interested in hearing if other phone vendors were embracing OpenVPN as well. (Other VPN solutions are all well and good, but I really like the flexibility

Hi, all. I've finally made the jump from 1.4 to 1.8. I've installed everything (I think), my Sangoma card initializes right... but there's no "dahdi" command -- not from the base, nor as a subset of the "core" commands. I've got my channels configured in my chan_dahdi.conf file. What am I missing, here? Thanks... -Ken

I'm very, very confused. Dialing out, through VoicePulse, with both gsm and ulaw CODECs, most of my calls are great. However, calling my (non-Asterisk) voicemail at my job, and calling my cell phone both produce horrendous (~ 1/3-second delay) echo. I've tried with different phones (Polycom and Grandstream), different IAX CODECs (as described, above), different network

Hi, all. I see that the Polycom SoundPoint IP 330 supports VLAN... but I don't quite see how that works. Do you point a non-VLAN'd segment at it (akin to when you uplink a VLAN_enabled switch), and have the phone implement the VLAN? Or...? *puzzled* Thanks much, -Ken

Hey, all. I'm seriously thinking about doing the VoIP thing at home. The perfect platform seemed to be the Sheeva "wall wart" (http://www.marvell.com/products/embedded_processors/developer/kirkwood/sheevaplug.jsp). It's a cute little doohicky with USB, SD-card, Ethernet, and runs on an ARM CPU. I'd like to avoid SIP to my provider, just 'cause it's always such a

Hi, all. I'm probably doing Something Dumb(tm), so please feel free to point out whatever I'm missing, no matter how stupid. Anyway, I've got IAX set up to Vitelity. When I try to call my DID, I get: Rejected connect attempt from 64.2.142.19, who was trying to reach '6031234567@' This leads me to my first question -- why doesn't it show a context? (My second is,

[Please excuse if this is a repeat; I initially tried to send it from a different account, and it's been held up for a couple of days awaiting moderation.] 1) What's the absolute minimum required (hardware-wise) in order to get one in-bound POTS line into Asterisk, and then have IP phones "inside?" [In other words, I obviously need a NIC -- but what would be the