similar to: Incoming and Outgoing zaptel configuration : ISDN30e

Thanks to help on this list and Sangoma's support we have incoming and outgoing calls passing through asterisk. However both incoming and outgoing calls are greeted by silence. I've noted our existing config below with our test extensions.conf. Help much appreciated Rory Zaptel ----------------------------------------------------------------------- loadzone=uk defaultzone=uk #Sangoma

We will be connecting our Asterisk server to ISDN 30 and intend using the Sangoma A101 card. The install location is in London (UK). Sangoma card at Voipon http://www.voipon.co.uk/sangoma-a101-pri-isdn-card-p-132.html?gclid=CI32vJz22I0CFQXklAodIgjHaA I would be grateful to hear if this is the right choice of card. Usage reports would be helpful. Regards Rory -- Rory Campbell-Lange

Hello, I have a Sangoma A101 connected to an ISDN30 (E1 in the UK) with some Snom 300 and Idefisk softphones. I can do SIP and IAX2 calls just fine, however I cant get any audio in either direction on the Zap channels. When I call in or dial out over the ISDN30 (UK E1) I can see the call answered/placed on the CLI and then silence follows. I've been provisioned 25 out of the 31 channels only

Hi there, we have a problem with dahdi and overlapdial. We are running an E1 in Germany and are in need of overlapdial. The E1 is connected to a Sangoma A101. As soon as overlapdial is set to "yes" we have problems with incoming audio on the dahdi channels. When set to "no" all audio is fine. Basically we can choose between being able to receive calls or to place calls

I have done a read.table on a data file with the aim of extracting subsets of the data eg table[table$desc = 'result1',] How can I convert $desc to a character type? At present it is seen by typeof() as an integer. How can I do the equivalent of table[table$desc = 'result1' && table$amt > 20, ] Thanks, Rory -- Rory Campbell-Lange <rory at

I would be grateful for some comments on our proposed machine specs for a new Asterisk installation at a client with an initial 70 extensions. The system should be able to handle 100 extensions. The system will have the following main features: - PSTN connection via ISDN 30, dealing with all incoming calls. Outgoing will be through ISDN initially - 70-100 Snom 300 handsets - 1-2

Hi Using Apple Mail I cannot make subdirectories within new directories I have made on a Debian Dovecot-driven IMAP server (version 0.99.11-3). Some users, having used Exchange, expect to be able to do this. However I can't make it happen, even after doing some tests by chmod-ing the top-level directories to 777 and enabling the mail_full_filesystem_access = yes option on a test

We are intending to have some project mail accounts which many people (up to 10) will share. Will this work? Our configuration uses imap only, with maildir format mail storage. Thanks Rory -- Rory Campbell-Lange <rory at campbell-lange.net> <www.campbell-lange.net>

Hi. We've just installed Windows updates on our Windows 2003 Domain Controllers, and have the following issues on our storage server, which is running Debian stable 2:3.5.6~dfsg-3squeeze5 Jan 17 10:27:51 xxx smbd[2426]: [2012/01/17 10:27:51.286853, 0] lib/util_sock.c:680(write_data) Jan 17 10:27:51 xxx smbd[2426]: [2012/01/17 10:27:51.286915, 0]

Hi! I'm looking forward to deploying dovecot as an IMAP server. I did some research into the various options and it looks like dovecot is the right daemon for me. I'll be using it with Exim. I am running a few tens of users on my server, most of them small numbers of people part of a small company, e.g. example.com. At present I have exim delivering to mbox in each virtual user's

I'm trying to install wanpipe on my new 2.6.21-2-amd64 core 2 duo machine (Debian's amd64 works with EMT64 too) to run Asterisk. I'm getting compilation errors when trying to install the wanpipe utilities. We are intending to use a Sangoma A102 card for ISDN30 in the UK. I've tried both the current stable 2.3.4-10 release and the new wanpipe-3.1.3 beta release of wanpipe. The

Hi :) My employer is looking to move a call centre to a new office, and has been increasingly frustrated with their legacy PBX (call-logging licensing and hardware upgrade costs). So I've stepped forth as the Open Source Pedant and suggested Asterisk so we can do all our own CallerID / call logging / analyses, and make use of IP Phones / teleworking, etc. The problem begins in that I only

On 17/09/18, Peter Stuge (peter at stuge.se) wrote: > Rory Campbell-Lange wrote: > > Can ssh-add work on the remote socket file? > > I expect that it will just work<tm>. The local socket is just a > socket, and the protocol[1] message SSH_AGENT_ADD_KEY is the same. Local: $ ssh-agent > /tmp/agent.env $ source /tmp/agent.env $ ssh-add ~/.ssh/id_user $ ssh

From: David Winsemius <dwinsemius at comcast.net> On Jul 16, 2011, at 12:15 PM, Rory Campbell-Lange wrote: > On 16/07/11, David Winsemius (dwinsemius at comcast.net) wrote: >> >> On Jul 16, 2011, at 11:19 AM, Rory Campbell-Lange wrote: >> >>> I'm an R beginner, and I would like to construct a set of boxplots >>> showing database function runtimes.

Hello, I have an Asterisk running with a Sangoma A200 card with Hardware Echo cancelling connected to the UK PSTN. If a PSTN call comes in, voice both ways is OK, however if an outgoing call over the PSTN is made I can hear the other party OK but they can not, they can barely understand what I am saying, my voice is unclear fading and skipping. Internal SIP and IAX2 calls are OK,

Ok Guys, I've done a tonne of hunting around on this problem, but can't find much help. I'm running: asterisk 1.4.19.1 libpri 1.4.3 and zaptel 1.4.9.2 which I believe has been modified by RedFone to add the ztd-ethmf module. My interface is a RedFone foneBridge2 4 Span; and I'm connecting to a BT E1 PRI / ISDN30e with 15 lines on span 1, and a legacy Panasonic PBX on span 4. Upon

Hi. I aim to provide pop3 and imap services to a few users. At the moment I only offer imap for squirrelmail users. However, I can't login successfully for pop3. It appears to be trying to auth against PAM, rather than directly using the passwd-file. Thoughts? Thanks, Rory Config: uthenticatprotocols = pop3 imap ssl_disable = yes login = imap login = pop3 mail_extra_groups = mail auth =

Hello, I'm considering an Asterisk box for up to 10-15 concurrent calls. Incoming PSTN/ISDN/IAX2, outgoing PSTN/ISDN/IAX2. Could someone roughly suggest the minimal hardware requirements for this kind of setup? Trying to come up with the cheapest solution. Thank you. Veselin K

Hello, I have to debian lenny servers serving SAMBA shared folders to XP SP3 clients. One server is running samba 3.2.3, the other 3.0.24. On one of the shares there is a folder which contains email message files with names like: 1164373321.H21047P2656.mail.domain.com:1Gnagg-0000gi-0p On the 3.2.3 samba server: >From XP I can browse the folder containing that file, but if I try to copy the

Hello, does this sound as a good combination, mini-itx board with Atom dual core 1.6ghz 2G ram and a sangoma USB? For a setup with PSTN for incoming and IAX2(alaw/gsm) for outgoing calls. - Would you say its a good choice from a hardware perspective? - Roughly how many concurrent calls would one of these be able to handle? Regards, Veselin K