similar to: asterisk multiport

Hello: Have a TE110P laying around and decided to see if I could build a router around it. I've tried compiling several versions of zaptel .1.4.x with the same results. I checked the zaptel changelog and can't find anything about it no longer being supported (or that it ever was for that matter). ztcfg: Zaptel Configuration SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Asterisk 1.2.24 seems to crash repeatedly under any substantial call load (and sometimes without a substantial call load - just one SIP leg is enough to do it) when using the G.729 pre-compiled binaries from: http://asterisk.hosting.lv/ As per: http://www.voip-info.org/wiki-Asterisk+G.729+Licensing Time to crash is variable, but seems to require at least an hour of production performance

I need your help: please help test the gender detection module at 575-613-4392. I wrote a gender detection module and thought I'd try it out. It only takes a second. I've been showing 90%+ accuracy and I want to make sure it's working correctly. Rain and significant background noise seems to throw it off, so I still have a bit of work to do. Have your friends and significant others

Zitat von Steve Totaro <stotaro at totarotechnologies.com>: > Are you using the wifi on on the cellphone? The peer IP is showing as > 192.168.200.3 which is not a routable address. Unless things have changed, > double NAT configurations do not work. Hi Steve, My Asterisk is behind a NAT, but my cellphone was NOT in NAT, but direct in Internet. But maybe my Provider does a

Ashwin Surendran <Ashwin.Surendran at now-health.com> schrieb: > What settings have you got for directmedia? > > Could you try > > nat=force_rport,comedia > directmedia=no Tried. Peer always unreachable, call not possible... :( Other idea? Thanks Luca Bertoncello (lucabert at lucabert.de)

Is there anything special that anyone here has had to do to get an Aastra phone (on the Internet) to talk to Asterisk behind a PIX firewall? Ports 10000-20000 UDP are open on the PIX and forwarding to the Asterisk server. The Asterisk server's RTP.CONF is set to use 10000-20000. The phone registers, and will place AND receive calls, however, no audio is passed. The phone is an Aastra

Since it is Saturday evening (7PM EST) I am asking this on the list in case someone who knows sees it and can answer. Astricon is in my back yard for the first time, and I could hit you with a rock. I would always like to attend, and spoke at the 2007 Astricon in Phoenix but don't have the idle cycles. Question: Can I just go to Astricon and take the dCAP exam only? In and out? Cost? I

Unbeatable price for a low end Asterisk server (or any server for that matter) http://configure.us.dell.com/dellstore/config.aspx?c=us&cs=04&kc=6W300&l=en&oc=bednv4k&s=bsd I wonder if anyone has any experience with this box and Digium or Sangoma hardware? Any compatibility issues? If not, I might stock up on them. Thanks, Steve Totaro -------------- next part

So we've got a TE410P configured as E-1. The PRI is showing up as normal, I have green lights, but d channel doesnt seem to come up and i keep getting this error if i do a "pri intense debug" The carrier swears up and down that there are no issues on their end. Any thoughts? localhost*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > M3:

I can ping it just fine. I am on gw5.voicepulse.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040615/054c83f4/attachment.htm

hello to all, I advice you to not use CDRtool from ag-projects : Fisrt ag-projects talk about is product like a gpl software however they don't provide at least some documentation for non commercial users . try to call them !! i'll offer you some money . You can not Call them for some advices ... It's really a bad product don't waste your time to setup it. this enterprise must

I am thinking of getting an asterisk user group together for either SE Michigan or just Metro-Detroit. How much interest in asterisk in Michigan is there on this list? I am already on the board of glimasoutheast, with is a group for technology professionals. (very broad range) It is a spin-off from Automation Alley, which is SE Michigan's version of Silicone Valley. -- Steven

List users, Did anyone else recently receive spam from DIDForSale with the subject "DIDForSale 2012 achievements"? I suspect that they are using this list to harvest email addresses and think they should be called out on this poor business practice if that is the case. Regards, Matthew Roth InterMedia Marketing Solutions Software Engineer and Systems Developer

Thanks for the feedback. I did some research and it looks like you were calling over international lines. It also appears that there was high than average static on the line, which is not normal for my system. It's true that I threw my recordings together quickly and the beep was supposed to be funny - it was actually me saying "beeeeeep". However, the static and noise you received

Hello list- I'm having an extremely odd issue with an installation of mine. The system is running * 1.2.12.1 and currently handles around 100 handsets. With the exception of a few Grandstream DTA's, all devices are Polycom 320, 430, or 601's. After a recent power outage, I'm having an extremely odd issue with one of the handsets. One of the Polycom 601 units simply reboots every

hi, there is T.38 fax gateway for asterisk http://bugs.digium.com/view.php?id=12931 please test it and report bugs for people from http://www.voip-info.org/wiki-Asterisk+T.38+Bounty if you still want donate t.38 development please contact me at cervajs at fpf.slu.cz --------------------------------------- Marek Cervenka =======================================

Hello, I read on the wiki that chan_mobile supports one device per dongle. Is this still the case?

I'm trying to get call parking working with the lighted buttons on the SNOM 200. I have set the 5 buttons to "Park Orbit", for extensions 700-704. Pressing the first button (x700) does park the call. However, the remaining buttons (x701-704) don't allow me to pick up parked calls, or show parking status via the LEDs. I can only pick up parked calling by manually dialing the

Does anyone know how to setup a linear type of queue strategy? By that I mean that agents will be tried in a particular order and the call will be routed to them unless they are on the phone or not logged in. I want a 3rd party app to be able to re-arrange this order on the fly based on sales and other metrics. Anybody setup something similar? Any pointers or products already out there open

Hi, I have configured asterisk now with ENUM lookups which are working really perfect. Now I want to play a small soundfile before dial the number to inform the caller which protocl is used (SIP, IAX2 or ISDN). How can I do this? With Playback it doesn't seems to work: [iax2-sipport-out] ; with leading 3 using IAX-sipport exten => s,1,NoOp(Dialing ${DIALSTR} with iax2-sipport-out) exten