similar to: Terrible clicking on T1

Anyone interfaced * to the Nortel option 61c pbx via T1's, pri, etc? Need to begin planning the implementation, purchase cards, etc. Any recommended approaches, configuration problems, etc? Off-list is fine if you'd like. Rich radamson @ routers . com

We are currently working to trunk from a Nortel 81C to an Asterisk Server 1.4 running on Red Hat Linux. We have two PRI trunks which work with the exception of the clock slips, which is causing the Nortel to reset the PRIs once a hour. Thanks for any suggestions. 81C MSDL Asterisk Digium TE110P REQ prt TYPE adan dch 10

I'm hoping someone can give me a little dialplan assistance. Here is my scenario... I currently have an AT&T T1 connected to a Nortel Optn 11. I recently purchased a Rhino system with a Rhino dual T1 card. What I want to do is insert the Rhino box between the CO and the Nortel on the T1 so I can start migrating users over to the Asterisk system in the near future. But, in the meantime, I

Hello to all, I have a problem with an asterisk qsig. I have three machines: Nortel CS1000 --- Card Sangoma PRI ---> Asterisk QSIG ---SIP Trunk---> Asterisk I use Snom phones on Asterisk. If I call from Asterisk to Nortel, Nortel reminds me of the name of the person i'm calling and I visualize on the display of Snom phone, but if I call from Nortel to Asterisk, the QSIG does not send

Hi all, I'm trying to insert a Rhino Ceros box equipped with a Rhino R2T1 dual-T1 card and running the latest version of Trixbox (2.4.2) between the central office and a Nortel Option 11. The switch at the CO is a DMS100. Basically, I'm taking the T1, connecting it to port 0 on the R2T1 card, and then connecting port 1 to the Nortel. (Actually a CSU and then the Nortel) We're running

We've been trying unsuccessfully to connect our Meridian Option 81C to a TE110P via PRI. We've followed the directions in asterisk-meridian-a1.pdf (link on http://www.voip-info.org/wiki/view/Asterisk+legacy+integration), but it doesn't seem to work on our 81C (even though many, many users report it works very well on Option 11's). Has anyone had any success in getting the above

I have gone through some archive about Nortel MICS (Meridian ?)+ Asterisk Integration but I'm not sure whether same as my case . 70 telephone sets | | Nortel MICS 4.1 --------- Asterisk | PSTN I have read the David Gomillion's Guide and got the idea . However, my plan is slightly different from what he did , I need to use Nortel MICS to connect to PSTN (I

So this is just a general question, Is Asterisk really good? Reliability? Functionality? Customization's? I am coming from a Nortel world, were you pay for everything, and you can't delve into the software. But it seems that customization would be a great thing. Like, setting up a war-dialer to customer lists, incoming/outgoing faxes (that's possible with Asterisk, right?) and

Hi I want to connect asterisk 1.0.9 ( kernel 2.6.8-2 debian )with TE110P and Nortel meridian option 11c release 25.40 with NTBK50AA card which is An E1 card. But the main problem is the first stage that no sync occurs the * card never syncs with meridian card I am using euroisdn, ccs , hdb3, crc4 , pri_net on asterisk And I am assuming that meridian is using same as it is

I've got a system where I'm integrating a Nortel Option 11c with a Trixbox 2.0.0 system using a Sangoma A101 T1 card. (Running on a Dell PowerEdge 350) We've got things mostly up and running and all seems well... except... If I call from a SIP extension (X-lite soft phone) dialing 9xxxx where xxxx is an extension on the Opt 11, the call goes through to the Opt 11 but I have terrible

Hi Folks, I'm trying to send CallerID Name information out to the PSTN via a PRI with Bell Canada with no success. With inbound calls (originating from the PSTN) CNAM is received successfully, and we've not had any similar problems with other Telco PRIs, so I'm stumped.

Does anyone know if Asterisk can function as a voicemail system for a Nortel Option 11 PBX? We will be connecting Asterisk to act as an IVR before sending calls to the Nortel and as a Voicemail system in case the user does not answer. That part is trivial, the only problem we have is that the customer wants the Voicemail light on the Nortel phones to light up when a user gets a new message.

Hello, I am fairly new to asterisk. I am currently using asterisk as a more convenient sip side voicemail system. My problem: I have cisco 7960 phones whose out of band dtmf tones are recognized properly(when dtmfmode=rfc2833) by asterisk but whose in-band dtmf tones are recognised poorly(when dtmfmode=inband) . For example 7999 comes out as 799999, 4242 comes out as 442422 ... etc I

I'm connecting a T1 PCI card to a Nortel Option 61 switch T1 card. My Sangoma A102D shipped with 2 T1 cables - which I assume are straight through. Do I need to make crossover cables for this scenario? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071026/9cea5e74/attachment.htm

Skipped content of type multipart/mixed-------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 186 bytes Desc: OpenPGP digital signature Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20061103/b35592e2/signature.pgp

Looks like we will be forced to make a move on our voicemail system as Nortel has declared Meridian Mail an end of life product. Frustrating thing is that it would seem their only reason for it is so they can force our hand to move to Call Pilot. Is there any documentation and feedback out there of how people have used Asterisk as a voicemail system for a legacy PBX? We've got about

Hi, i have one Asterisk with a Digium E1 card, and a Meridian Nortel Release 11. I need to connect both of them. We are using MFC/R2 for this.. The Diagram: [ NORTEL ] ( AMI ) ------------------------------------------------ (DIGIUM) [ ASTERISK] we have green light at the digium card, and at asterisk we see all 31 channels as idle. But when i want to recive a call from the Nortel to the

To All; My current issues is a 5 second delay for call that is being transferred from the Norstar units to the Asterisk servers VIA a PRI. Is their anything that can be done to speed up the transfer on the Norstar. Below is my current phone config. < Norstar1 >----PRI----< Asterisk-1 >----IP-WAN----< Asterisk-2 >---PRI---< Norstar2> The Norstars are MICS 0x32 4.1

Hello all, I have Asterisk 1.2.1 and a TE110P connected to a Nortel Meridian Option 81C system. The PRI line is currently setup as DMS100. Here are the relevant lines from zaptel.conf and zapata.conf: zaptel.conf: span=1,1,0,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone = us zapata.conf: [channels] language=en context=from-internal musiconhold=default switchtype=dms100

I'm trying to find a high port count ATA device. We have a lot (up to 110) analog devices that we need to bridge to IP. Rather than go out and buy 110 ATA's, it would make more sense to buy a single chassis type device with some number of ports and blades. Anyone know if such a device exists? Thanks, Doug. -------------- next part -------------- An HTML attachment was scrubbed...