similar to: Single ringer phone for incoming calls, that anyone can answer

Setting up pick/callgroups really tightly is the way to go - one of our techs here does that all the time for clients. PaulH On Wed, 2007-06-20 at 20:51 +0930, Tom Lanyon wrote: > Hi list, > > Does anyone have any advice on the following: > > Incoming calls to our office come in on a SIP trunk. Since all our > offices/desks are in close proximity, we would like just a

Asterisk 1.2.13 I am trying to figure out the best way for a night bell at work. Note: I have no spare buttons available on the phones. But I do have two lines and two park positions as buttons. Option 1 (easiest and the one I just implemented) When asterisk is in night mode, Connect to IVR, List all options and then if they dial 0 or timeout, ring every phone in the

Hi! > How to do this ?? > To proceed with your answer on PICKUPMARK, where do I put this ??? Look at the example for Asterisk 1.4 on this page: http://www.voip-info.org/wiki/view/Asterisk+cmd+Pickup Philipp

I am using SugarCRM together with the asterisk plugin, which allows me to click a number, SugarCRM calls my extension then places the call when I pickup. I would like to have that extension auto-answer. I set it up as line 3 on my phone so normal calls do not get auto-answered. However, I have not been able to get this to work. Has anyone implented this? This is what I put in the config file

Hello list, I try to pick up a ringing extension but nothing works. To be clear, I'm trying to pick up extension 10. [Jun 14 17:37:34] -- Executing [**10 at from-TESTCORP:4] Pickup("SIP/testcorp3-00000041", "10 at 123456") in new stack [Jun 14 17:37:34] NOTICE[16555]: app_directed_pickup.c:159 pickup_exec: No target channel found for 10. [Jun 14 17:37:34] --

Hello ! I am having troubles setting up Busy Light Fields (BLF) in asterisk 1.4.18 The things work up to 80%, I can transfer the call by BLF button and I can see the green (free) status and red (busy) status. What I cannot do is to accept the call when someone rings a remote extension. The BLF button starts to blink in red telling me that the call is ringing on remote extenson, but if I press it,

Hi! I'm using ael language and I need to pick up a call from outside to an internal number. for example: i'm 120 the phone 100 rings, it's a call from outside. now I pick up the call with: *8100 and I would expect to answer the call but the response is Declined the Puckup code is below: _*8X! => { Pickup(${EXTEN:2}); Hangup(); } the problem is if an another number ( 130) calls

Hi! What are the typical ways to work around the 64 groups limit? thanks klaus

Hi, I am just moving from Asterisk 1.2+bristuff up to 1.6.2, a huge leap :) I was wondering if someone could point me at 3 things that I appear to have "lost"? 1) ZapEC(off) - Is there an equivalent dialplan command to request no EC on a channel before dialling in DAHDI? 2) rxfax(file.tiff) - I have found ReceiveFax(), but I am aware that much has happened in the faxing stakes

Hi, I've used various patches with asterisk 1.4 to have support for call pickup and notification with good results. Now I'm trying vanilla 1.6.2 with its official support for "dialog-info +xml" notifications with no success. This is what i'm doing: - Phone A has a key configured as type "extension" pointing to Phone B. - In sip.conf I added

Hi, I have a customer with a definitely low-tech need: he has a noisy storeroom where he wants to hear the phones ringing so he can leave the storeroom and pick up the phone in his office. So all I need is a loud SIP ringer. Does this even exist? I know paging amplifiers exist, but that`s not what I need. Mike -------------- next part -------------- An HTML attachment was

Hello, when picking up an incoming call from one ip phone on another ip phone, the call terminates after about 5 to 10 seconds. When reading out the hangup cause variable in the h-extention of the dialplan, the hangup cause seems to be 111. In the dialplan output, you can see that SIP-peer sipacc3 picks up the incoming channel SipAgenT01-00001454, and the call is answered. After 7 seconds,

I noticed that the BudgeTone (I have the 102) with the latest firmware tries to download a file called cfg.txt (presumably the configuration) and a file called ring.bin (presumably a ringer) from the tftp server. The ring-in sound on the budgetone is the same as the ring-out sound and that is going to be confusing for users. I contacted GrandStream and was informed that both of these formats are

Man, I really feel stupid, but after banging my head on a brick wall for several hours ... I need help! I've gotten the BLF to work on my shiny new GXP2010. The GXP is exten 5707, and I've got an xlite on 5608. When I make a call from an outside line, I dial SIP/5608. The little blinky light on the GXP that's monitoring 5608 goes, well, "blink blink". :) I then press

Hello, I am having some troubles with Snom phones and maybe someone can help me. Let me say this: BLF and pickup works great with Polycomes and Grandstream etc... So I think my problem might not be Asterisk related but I am not 100% sure. The snom phones subscribe to my extensions (hint priority) as expected. The light blinks (ringing) or is turned on (in the call) as expected. My problem is to

In ipmid.cfg I have: <G3INTERCOM se.rt.10.name="G3INTERCOM" se.rt.4.type="ring-answer" se.rt.4.timeout="1000" se.rt.10.ringer="7"/> In sip.cfg I have: <alertInfo voIpProt.SIP.alertInfo.1.value="G3INTERCOM" voIpProt.SIP.alertInfo.1.class="10"/> I set up a test extension: exten =>

Working on a paging system for one of my sites and running into something I can't believe is this hard. In one of the zones, they want to have three different extensions ring over the pa system, using it as a loud ringer. Now the paging system does have a loud ringer built in and I can easily have it do a simultaneous ring, but all of the extensions will sound the same over the loud

I was trying to get my polycom phone to auto answer. I added this to the dialplan. Used a different phone to call "22" and the phone rang it did not auto answer. Did I miss something? exten => 22,1,SipAddHeader(Call-Info:=\;answer-after=0) exten => 22,n,SipAddHeader(Alert-Info: Ring Answer) exten => 22,n,Set(__SIPADDHEADER=Call-Info:\;answer-after=0) exten =>

Anyone have some recommended equipment for alerting people to calls in a noisy environment? I have Polycom IP550 phones set up in some really noisy environments - our mine hoists - and they tend to drown out the ringers. I'm using Clarity WR100s now. They're analog devices, attached to Linksys PAP2T ATAs as part of a call group to get a loud (advertised as 95dB) ring out there, but it

Is anyone using the SNOM 360 as a reception console with Asterisk? We are trying to have the ability to view whether an extension is on or off hook, or ringing with the Snom, which seems to work fine. The issue is that we are having difficulty picking up calls and transferring. Anyone have experience / insight? Darrell S. Long Director of Technology BestWeb Corporation Phone 877-777-2932