similar to: Play dial tone withou answer

Hello, we have a PRI (E1) to a carrier and a second one to a legacy PBX: DTAG ---pri---- * ------ Hicmo (PSTN) | | Sip and more Many normal inbound calls are direcly routed to the hicom. Outbound calls from the Hicom go through LCR and then to PSTN. Inbound faxes are working, but outbound faxes from hicom to pstn are

I am originating a call to a Local channel using an Originate Action: Action: Originate Channel: Local/dial at outdial Context: outdial Exten: answer Priority: 1 Timeout: 45000 ActionID: some_id In my dialplan, I have this: [outdial] exten => dial,1,Dial(${DIAL_STRING}, ${DIAL_TIMEOUT}) exten => dial,n,NoOp(Dial Status = ${DIALSTATUS}) exten =>

I've noticed I have an issue with my Dialplan ... apparently instead of a busy signal when the caller is busy it falls through and gets a Congestion... What's the proper syntax for this, reorder tone when there is a reorder and busy when there is a busy... SBC is a T1/PRI. [macro-sbc-outdial] exten => s,1,Dial(${ARG1}/${ARG2}) exten => s,2,Congestion exten =>

Hi, I am using phpagi for agi scripting. and want to update callerid number but didn't get any success. please help me how to update PHPAGI is new for me. Below is the code which I write. #!/usr/bin/php -q <?php set_time_limit(30); //require(.phpagi.php.); include("phpagi.php"); $agi = new AGI(); //answer the call $agi-> answer();

I would like to use * as a standalone voicemail system. As such I need it to be able to outdial a certain extension for MWI-ON and another extension for MWI-OFF Is there anyway to get * to automatically dial an extension when a voicemail is left and another extension when the mailbox is cleared? Thanks -------------- next part -------------- An HTML attachment was

Hi all, * was running ... I have a WT405P and an AVM C4 with chan_capi 0.3.4a Today chan_capi stopped working, without any changings at the system. It seems, that not * is the reason, because isdn-log also shows no calls. If I try to call * from outside via capi, I only get a busy. That is the try from inside to outside: stern01*CLI> -- data = @89930:0107901723168212 -- capi

Hello, I am working on an outdial project and the Asterisk box is connected behind a PBX via SIP. When a call from the Asterisk box is routed out over the PRI attached to the PBX I am not getting proper call progress. The PBX is indicating that the call is answered while it is still ringing at the far end. Does anyone have any suggestions on how I should go about waiting for a variable number

Hi, I'm using videocalling on asterisk 1.4.10. When I setup the videocall with exten = n,1,h324m_gw(s at video2webanswer), I loose the variable DNID (${CALLERID(dnid)}) Before the videocall is set up, this variable is filled and after this videocall this variable is empty. Also all local variables are empty. If al look at the A-number (${CALLERID(num)} this variable is not empty

Hi, In my application I jump to different extensions For example: [begin] exten => s,1,Goto(starts,s,1) [start] exten => s,1,Play(welkom) ..... exten => h,1,Goto(end,s,1) [end] exten => s,1,Macro(end_call) exten => s,n, Hangup When I look at my CDR record I see three different CDR's in my record. Is there a way to use one CDR on every call, and not

GoIAX, the Asterisk community's free IAX provider, is offering free US dids now. I loaded about 175 dids in and put up a very beta sign in page. Unfortunately I had to restrict the free us/canada outbound calling back down to toll-free only. There was a lot of war dialing and prank calling going on. I'm working on some stuff to hopefully curb that kind of stuff down so I can

First off, I also posted this on the digium forums so if anyone here also reads those, sorry for the cross-post. When I place an outbound call using SIP to my cell phone, asterisk immediately starts processing the dialplan without waiting for the call to be answered. We could handle this on DAHDI using callprogress, but I don't know of a similar setting for SIP. Here is the contents of

hi, i have connected a SNOM 200 to the asterisk. here are my settings, Codecs ------- Default codec - g.711u/g.711a Packet size - 20ms Negotiation - Interoperable Type - 160 DTMF ---- Inband - negotiate Outband - negotiate Payload Type - 101 when a call comes to the SNOM or when making an outdial, following warning messages are coming on asteisk, WARNING[1209214400]: File dsp.c, Line 1198

hi there, i've been able to successfully run asterisk with the Voicetronix OpenLine4 card, it can accept calls and function normally. The only problem I'm experiencing so far is getting the card to outdial to a third party. What I'm trying to achieve is basically call bridging, where the caller dials in to asterisk, some IVR plays and then attempts to perform a "transfer"

Hi, Does anybody know if RAMI (Ruby Ami) is still functional? And is this still compatible with asterisk 1.8 Best Regards, Arjan Kroon Mobillion BV

Hi, We are use IAX protocol between two asterisk servers. Now we send information through this protocol by using EXTEN We see that the variable EXTEN only holds 66 characters. If we set a value larger then 66 characters, for example 70 characters. The last 4 characters are cut off. Is there a way to increase this variable? Kind regards -------------- next part

Hi, I want to place a pipe symbol in a variable by using the command Set I tried the following code: Set(M_CHANNELVAR=${UNIQUEID}|${CALLERID(number)) When I call to my applicatie I see the following output in my CLI : Ignoring entry '612345678' with no = (and not last 'options' entry) (in my test call ${CALLERID(number) = 061234578) I tried to

Hello, I'm using X-web lite in a webpage to connect to one of our asterisk server. But now I have a problem, when you are connected to a voice script the voice will not be heard after a couple of seconds. When you press or say something that the voice will come back for a couple of seconds. When I thy X-Lite (stand-alone version) I had the same problem, but when I turned off the

I read the wiki and looked at the examples, but I'm still having problems. I have a Digium 4 port card with POTS lines plugged into all four ports. How do I play the congestion tone the the caller when they try and dial out but all the lines are in use? should something like this work? [dial-trunklocal] ; Local calls ignorepat => 9 exten => _9NXXXXXX,1,Dial(${TRUNK1}/${EXTEN:1}) exten

Our company is at the point now where we're almost ready to switch over to an Asterisk server for a number of telephony applications. There is one final application I've been trying hard to find to replace something we already use with another provider. It's kind of an advanced "FollowMe" application. (freedomvoice.com) It works as follows: 1. An outside caller calls into

Hi All, I'm trying to configure a Digium T100P to talk to a legacy voicemail system. I have the signaling specs verbatim from the original manufacturer documentation as follows: [T1 Signaling] Service Type: T1,D4 format, AMI(Super Fram) Signaling: Four wire, terminated, E&M (Robbed bit) Start Protocol: Wink start; 250msec duration Dial Tone: Enabled Digits: DTMF, 4-digits DTMF: 50msec