similar to: No/unknown event '0' on timer

We upgraded our asterisk server to 1.2.18 last night to pick up the security update. Since then, any calls coming in on IAX2 links get dropped if they try to enter a MeetMe conference room. The log shows this: Apr 26 08:33:16 NOTICE[27362]: chan_iax2.c:3167 iax2_read: I should never be called! Hanging up. I've temporarily worked around it by switching our inbound provider to use SIP

Hi All, I'm having a problem after reinstalling the operating system. Festival works fine for SIP, but when IAX users are calling the same extension they don't hear the festival and I see the next message on console: NOTICE[3996]: chan_iax2.c:2995 iax2_read: I should never be called! I googled and couldn't find a solution, if somebody can help.... neobase*CLI>

I'm trying the latest bri 0.1.0 RC2 drivers. In announce I see implementation of so long waited Transfer feature. But I can't make it work. When the person who is making transfer after talking with second party press "R" second time to establish 3 way call the person to which call supposed to be transfered being disconnected. Any ideas whats wrong? Thanks, Dmitry

I have a setup where I have three NIC in a Debian box. I have eth1 conected to internet and eth0 NAT''ed to 192.168.1.1. eth1 and eth2 are bridged together, given ip 192.168.122.2. What I want to achieve is to perform traffic shaping on the bridge as well as prioritizing the traffic from eth0 very low. (This is from trental flat ...) However it seems that I am unable to perform thhe

Hi, I have a question conercing wondershaper. I''m using the Clarkconnect linux distribution for my linux router and I tried to use wondershaper. On start up of wshaper, there are no errors or any other problems but I''m not sure if it''s running correctly. Only one qdisc / one class is used and when I start an uplink ftp transfer, my ping time is growing up to 1700ms - I

Hello all, I have browsed archives and real all available HOWTOs, but I still have a few doubts. My set up is a router, as below. LAN(100MB)-------------(eth1)Linux-Router(eth0)---------------WAN(2MB/512) My aim is to cotrol both uplink and downlink bandwidth. For uplink control, I will use HTB on WAN interface. For downlink, I plan to attach HTB on LAN interface(both egress/outgoing). No

Hello All I'm settup my asterisk as belows: sangoma card, connected with E1, CAS Signalling. I have two problem. 1. The asterisk don't received any DTMF when caller input to 2. when i dial to system, the caller hear bad sounds. monitor on console. asterisk show error. Jun 11 12:15:45 WARNING[1496]: channel.c:1447 ast_read: Exception flag set on 'UniCall/6-1', but no exception

Hi everybody, I have a network that only uses terminal services. Look at the diagram. 20 machines running WinXP <-> LinuxFW-1 <-> 1Mbit link dedicated fiber link <–> LinuxFW-2 <–> Terminal Server I’d like to give the maximum priority for bandwidth to terminal services (port 3389). I’ve changed the CBQ script from LARTC site to suite my needs, but every time I

Hi, got a 25/25Mbit connection which is quite stuffed. So I applied htb rules. Uplink: class htb 1:1 root rate 24500Kbit ceil 24500Kbit burst 4661b/8 mpu 0b overhead 0b cburst 4661b/8 mpu 0b overhead 0b level 7 Sent 430600689269 bytes 730147320 pkt (dropped 0, overlimits 0 requeues 0) rate 23057Kbit 5520pps backlog 0b 0p requeues 0 lended: 199673949 borrowed: 0 giants: 0 tokens: -964

Hello all, I am providing broadband service through DVB circuit. I have 4KB uplink and 32KB downlink. I want to share 32KB downlink bandwidth among 192.168.0.0/24 (20 users in this subnet i.e 192.168.0.2-192.168.0.22)subnet where each user will get 2KB to 6KB bandwidth. And from 4KB uplink bandwidth each users will get only 1KB to 2KB bandwidth.

Hi, I''m really new to traffic shaping and try to implement the wshaper.htb script. I have a linux box that serves as vdr, mldonkey, samba, apache and mailserver (imap), connected to my LAN with 100mbit. I''m connected to the inet via adsl with a hardware router/firewall, got 384k downlink 64k uplink. When I have mldonkey running, imap (via Outlook) gets *very* slow (mails with

Hi, I have been modifying the Wonder shaper to include another queue. My understanding was packets would be de queued to hardware in the following order: cbq1 -> sfq10 > sfq20 > sfq30. Also we only move onto the next queue when the preceding one is empty. However is seems to be prio xx number that reflects the order packets are de queued not to what flowid they belong to. If I

hey guys i am regulating the traffic to & fro by my network through a linux gateway , its behaving strange. i regulated Downlink to 2Mbps & UPlLINK to 500Kbps. both perform well when those are done independent i.e. one at a time but when i do both from a client system ..the downlink however continues at 2mbps but the uplink falls down to 100kbps? is something wrong with my script or

Hello All i have big problem for unicall. my system work successful with sangoma card, E1 and CAS signalling (vietnam). when at the some time. i have trouble then my system is half (CPU instructions = 100) i tested for some case as belows: - When i dial, then my system became answer, the caller hangup. system error message show (loop without condition and half machine) Jun 11 12:15:45

Hi All, I am a newbie I have gone thru the archive for a couple of days now, and kind find postings that related to what am trying to do, I would appreciate it, if someone could help me with their sample script which I can tweak. My setup involves eth0 - Internet, eth1 - LAN I have 10 computers and 1 VoIP Telephone on the LAN, 256kb downlink/128kb uplink, and running Squid 2.5 STABLE 3 with

I have been testing wondershaper 1.1a with htb. DOWNLINK=2304 UPLINK=1024 DEV=wlan0 No other changes have been made, except to comment out the 2 lines to allow the script to run. When I do a speed test from sites like www.toast.net/performance, I only get speeds equal to my UPLINK speed. I expected a speed closer to the DOWNLINK. Am I missing something here? TIA, -- -Wes Hegge Technical

I am currently using the ultimate-tc script from http://lartc.org/howto/lartc.cookbook.ultimate-tc.html and I want to make sure that internet radio packets (mp3 streaming audio) will always get through no matter what. I have added some iptables commands like this: iptables -A OUTPUT -t mangle -p tcp --dport 8000 -j TOS --set-tos Minimize-Delay iptables -A OUTPUT -t mangle -p tcp --sport 8000 -j

i am assigned a network to replace its "Windows server with ISA caching proxy" with another "debian linux with squid proxy" with both "linux" and "ISA" are completely differnet boxes. i am using linux 2.6 kernel since the linux server has SATA hard disks . the network has downlink with a penta@net DVB card for down-link ; then it''s connected

Hi I''m looking for a quick recipe for a newbie to control http traffic in my linux gw. My internet is overloaded already and vpn external clients are experiencing troubles (disconnecting in peak hours). Any suggestions ? Regards Guillermo Caracas/Venezuela On Thu, 2004-05-06 at 14:40, lartc-request@mailman.ds9a.nl wrote: > Send LARTC mailing list submissions to >

Hello, I am trying wondershaper-1.1a on a friend''s pppoe connection on her Linux box. There are a few things I don''t understand. 1. She has pppoe connection so should DEV=eth0 or DEV=ppp0 ? 2. Her ISP just says on her payment bill that the speed is 128kbps, but doesn''t mention any downlink/uplink speed, so in that case what should be, DOWNLINK= and UPLINK= ? 3. She