similar to: What replaces SetCallerPres in 1.4

Hi, I am using: Asterisk 11.2.0 libpri 1.4.12 Dahdi: 2.6.1 Sangoma E1-Card with Wanpipe-Drivers 3.5.28 I call my asterisk box via SIP and connect the call to an AGI-Script. Within the script I do EXEC SetCallerPres prohib or EXEC SetCallerPres prohib_not_screened But I get the following error: ast*CLI> == Using SIP RTP CoS mark 5 -- Executing [100 at sip:1]

Hi, Using * 1.2.5 with a euro_isdn PRI I need to hide the callerID on certain extensions. I have usecallingpres=yes in zapata.conf, and am using SetCallerPres(prohib) in my dialplan prior to the Dial command. No matter what I set SetCallerPres to the CID is still displayed. Is there something else I need to make this work? I can't just set the CallerIDNUM to null, as it is needed for

Does anybody know if SetCallerPres works on calls via SIP through a Cisco gateway? We are trying to mark outbound calls as anonymous and we set it to prohib, but calls still show outbound callerid. We are SIP from * to the Cisco gateway and then PRI outbound. If we strip the callerid num, then the first number on the PRI gets added as teh callerid, so we can't do that. We need to make

Does SetCallerPres(Prohib) remove the ANI data from a SIP call or does it simply set a flag telling other devices not to display the data? In other words, could another system override that and see the caller ID anyway? The answer may affect how I handle 911 calls, so I'm very curious.

The AGI debug command worked well, and I found the offending command: SetCallerPres(allowed) That worked in Asterisk 13, but from my google searching it looks like this command has disappeared in Asterisk 20 (actually everything after ver 13). I thought it was replaced with CALLERPRES(allowed) but this generated an error too in Asterisk 20. Is there a replacement command? -----Original

Hi, how may I define in a callfile the CallerID presentation to be used for the requested call, eg. set it to prohibited? TIA, Bruno -------------- next part -------------- A non-text attachment was scrubbed... Name: Bruno.Voigt.vcf Type: text/x-vcard Size: 270 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050913/fcb5c595/Bruno.Voigt.vcf

I should have included the debug output: <PJSIP/Twilio-NA-W-3-In-00000006>AGI Rx << CALLERPRES(allowed) <PJSIP/Twilio-NA-W-3-In-00000006>AGI Tx >> 510 Invalid or unknown command -----Original Message----- From: asterisk-users [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of TTT Sent: Saturday, July 1, 2023 11:37 AM To: 'Asterisk Users Mailing List -

Hello, on my ISDN phone I can configure that on the next outgoing call, my telephone number should not be transmitted, instead it should be UNKNOWN. How can I configure Asterisk to do the same? Is this a feature/parameter of the driver (chan_capi) that I'm using? BTW: I'm using ISDN and Deutsche Telekom, if the provider makes any difference. Thanks for your help, Stefan --

I have an issue where a particular dialplan works but another doesn't. I'm not sure why. To me they look identical and it has me stumped. This works: [to-test] exten => _X., 1, SetCallerPres(allowed) exten => _X., 2, Monitor(wav,/tmp/test-${UNIQUEID},mb) exten => _X., 3, Ringing exten => _X., 4, Dial(SIP/9330 at a-test,20,ro) exten => _X., 5,

hi all! I'm running an Asterisk-box with bristuff-....RC8n and 2 HFC-S cards. I m located in Vienna/Austria. I have the problem that on outgoing calls i hear my voice as a short echo (about half a second). This occurs not on every call. I tried some changes in my zapata.conf, with rxgain and txgain settings, but to me its hard to find a configuration which is good for every call i make. Is

I am trying to setup one time caller id block on my system(activated when an incoming call matches *811XXXXXXXXXX), and I have had little to no luck. Could you take a look at my context/macro definition and help me figure out what I am missing? Here is my context for my dialplan: include=default plancomment=user-default

Hi, how can I setup asterisk to use the number presentation bits on the isdn side to suppress the number presentation? We need to transmit the subscriber number for billing purposes via ISDN whether or not the user wants to hide his/her number. Is there any way to do this? Deti

Hi; How can a user block his caller-id in Astersik? Regards Mohammad -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041229/07ecf20f/attachment.htm

Michel Send me the same output for a dial string that only sends the *31* Is this an ISDN line? What type of card/signalling/switchtype are you using? It looks as if the PSTN switch accepts the *31* and then hangs up so you can make the NEXT call with the *31* feature enabled. If so I assume the *31* feature will be enabled for the next call on the ENTIRE SPAN if it is an ISDN trunk group. If

I've just upgraded to the latest CVS head, and my outbound calls stopped working. I traced it back to the line exten => s,9,CallingPres(${ARG2}) It seems as if this application is now missing. I tracked back the changes and found in 1.415 of chan_zap.c the code was removed because it was "duplicated". However, it does not exist anywhere ! Am I being stupid, missed

Hi Setup : Asterisk 1.6 on Fedora Core 9 with TE410P.. 1. I;ve noticed that whenever during "background(menu-filename)" method - i try to press any key for selection like 1 for some prompt, 2 for another prompt etc...Asterisk takes a while before it takes me to the respective option..Is that normal behaviour ? by the time the caller waits to listen to the appropriate prompt on selecting

Hey folks, I have a Digium TE205P working as a man in the middle: PRI line -------- Asterisk/TE205P -------- PBX The PBX is a Panasonic KX - TVP 100. Everything is working great except for one little issue. Asterisk isn't hanging up the PRI B channel when the PBX channel is hung up. I don't want to overload you with information but please ask if more is needed. I suspect I'm

Hello, Is it possible to set a variable in dialpan when the someone calls a particular DID number so that i can use that variable for calls coming to that number only. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100819/25402ade/attachment.htm

I'm having trouble setting the outbound caller ID on calls I make from my PRI trunk group. The PRIs are served out of a 5ESS. Telco has set the PRIs up for user provided caller id information, so I believe I just don't have it set up right in my dialplan or something. I can't seem to find an example of setting the outbound caller ID specifically for a 5ESS. Does anyone have an

hi list, I set up a new asterisk machine with asterisk 1.2.13 and misdn 0.3.1rc27. I use an e1 card with sip clients. My extensions look like this: [E1] <snip>...<snip> exten => 33006733,1,Set(CALLED=${EXTEN}) exten => 33006733,2,Dial(SIP/1@192.168.0.23) exten => 33006733-ANSWER,3,Answer() [SIP] exten => _X.,1,Noop() exten =>