similar to: TC400B load problem

Hello all, I have a TC400B Digium card in order to deal with transcoding and I have some trouble using it, I have a timer synchronisation problem! I would be very grateful if you have any idea to help me? It seems that the card is not correctly synchronised to the system because when I speak to one side, the sound takes 5 seconds to go to the other side, and increasing, after 30 seconds of call,

Hello, I have transcoding card TC400P installed in server running Debian with Asterisk 1.4.23. Everything seams to be fine and after I boot up server I see in dmesg: 7.590966] Zapata Telephony Interface Registered on major 196 [ 7.590966] Zaptel Version: 1.4.12.1 [ 7.590966] Zaptel Echo Canceller: MG2 [ 7.610963] zttranscode: Loaded. [ 7.618969] wctc4xxp: tc400b0: Attached to

Hi, Could anyone tell me how to read the values in the "zonedata.c" file? I am looking at the "zt_tone_ringtone" field mainly. Thank you. Jad Wauthier -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070512/4c0387be/attachment.htm

hello friends, i have to configures asterisk n my hardware details are O.S - Ubuntu 8.04 Lts Memory - 1 GB Proccessor- core 2 duo is any one having a good link or how to related asterisk. any help,support will be higly appreciated thx -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi All, I have recently installed a TC400B card into a system and am trying to get it to work. As far as I ca tell from the docco on Digiums website, there is no config as such unless you want to enable / disable only 1 codec, otherwise by default it runs as 92 channels of either. I have tried asterisk 1.4.9, 1.4.10 and 1.4.10.1 along with zaptel 1.4.4 and addons 1.4.2. The zaptel modules

Hi list, After a lot of testing + troubleshooting, I guess I'm observing what I am now calling a regression with zaptel 1.4.10 (is it?) As such I call for peer feedback, before either asking Digium install support or filing a bug. Thanks in advance! System: HP Proliant DL380 G5 with 2x PCI-X + 1x PCIe riser card OS: Centos 5 Kernel: 2.6.18-53.1.14.el5 (also tested under

Hi, After Bob fixed the two-address format of the ARM ldm/stm instructions, a problem remains. The load multiple instruction looks like: // A list of registers separated by comma. Used by load/store multiple. def reglist : Operand<i32> { let PrintMethod = "printRegisterList"; } def LDM : AXI4ld<(outs), (ins addrmode4:$addr, pred:$p, reglist:$dsts,

On Mar 19, 2010, at 10:28 AM, Chris Lattner wrote: > > On Mar 19, 2010, at 7:46 AM, Jakob Stoklund Olesen wrote: > >> Hi, >> >> After Bob fixed the two-address format of the ARM ldm/stm instructions, a problem remains. The load multiple instruction looks like: >> >> // A list of registers separated by comma. Used by load/store multiple. >> def

On Mar 19, 2010, at 7:46 AM, Jakob Stoklund Olesen wrote: > Hi, > > After Bob fixed the two-address format of the ARM ldm/stm instructions, a problem remains. The load multiple instruction looks like: > > // A list of registers separated by comma. Used by load/store multiple. > def reglist : Operand<i32> { > let PrintMethod = "printRegisterList"; > }

On Mar 19, 2010, at 11:04 AM, Jakob Stoklund Olesen wrote: >>> The description should only have 4 operands + variable_ops. >>> >>> How can you specify a named, variable list of output operands? >> >> Why do you need to do this? You currently can't do it. > > Because an instruction like LDM loads a variable number of registers. When it specifies

Greetings, Because of the heavy load and the high expectations of an asterisk server offered as a solution integrated with our CRM software.. we were looking into other possibilities than software Licenses for G729 and G723 codecs.. to lower the pressure on the processor giving it more space to do more work. We heard of a hardware (PCI CARDS) can be used with Asterisk that does the work. And we

Good afternoon, I'm trying to use the CLI command file convert on an Asterisk 1.4.26 server with a TC400B transcoding card. The transcoding card is working well for calls but I have some trouble converting sound files from alaw to g729. The command creates empty file as you can see below... CLI> file convert /var/lib/asterisk/sounds/fr/service_notactivated.alaw

Hi Guys, i spent some time to figure this out (since i love how dialplan is written) but i decided to ask for your help guys. i have two asterisk servers one is 1.2 the other is 1.4, from 1.4 (pbx1) to 1.2 (pbx2) i can leave a voice mail without any pb, but from pbx2 to pbx1 it just hang up. in pbx2 extensions.conf: i am using: exten => 8029,1,Dial(IAX2/pbx1/${EXTEN},20,tTWwr) in pbx1, i

Hi Guys, i am using two PBX's i can call from pbx1 a cellphone tied to pbx2 that way: 1) use a phone in PBX1 2) call extension in PBX2 3) extensions in PBX2 ring to a cellphone (as this specific ext is tied to a cellphone) my questions now is : am i gonna be able to dial from an IPphone registered within PBX1 to a cellphone by using the Trunk (Zap or dahdi) of PBX2? anybody know

Hi Guys, i am using the following config in pbx1: register => pbx1:endopass at 172.16.200.175 <pbx1%3Aendopass at 172.16.200.175> [pbx2] type=friend host=dynamic trunk=yes sercret=password context=[default] deny=0.0.0.0/0.0.0.0 permit=172.16.200.175/255.255.255.128 in pbx2: register => pbx2:endopass at 172.16.200.176 <pbx2%3Aendopass at 172.16.200.176> [pbx1] type=friend

I have a weird situation. A polycom phone is configured to use system pbx1 as the primary outgoing 'proxy', followed by systems pbx3 and pbx2. All three systems have identical sip.conf files. The phone is registered on pbx1. I shut down the Asterisk application on pbx1. I make a call. The phone sends an INVITE to pbx2. Pbx2 sends back a 407 Proxy Auth message to the phone. The phone sends

Hi. It is propbably a really naive problem, but I really couldn't find answer how to connect two Astrisks via SIP. I managed to do it via IAX without any problem. But this is a test installation and I would like to connect them via SIP. So I have two computers: pbx1 - 10.1.3.207 pbx2 - 10.1.3.204 pbx1 handles extensions 1xx and pbx2 for extensions 2xx. I would like to call user from pbx2 to

Anyone tried the digium TC400B transcoding card? What are your opinions? Thnx

Hi, I am trying to understand why some of my call transfers fail. My scenario is as follows: Legacy PBX1 ---PRI (EuroISDN) Zaptel--- Asterisk PBX2 Step1: PBX1 extension 101 calls PBX2 extension 102 Step2: PBX2 extension 102 answers the call and transfers it to PBX1 extension 103 Step3: PBX1 extension 103 answers the call and transfers it to PBX2 extension 104 Step3 fails and extension 103

thanks John yeah, your approach is much siple, i've tried it but i'm not able do detect DTMF tones. it seems that on calls that i receive DTMF tones are handled correctly, but on calls generated from Asterisk to the world when the called side sends some DTMF digits they are not detected: -- Executing [s at macro-myconnector:1] NoOp("SIP/pbx2-000004b2", "") in new