Displaying 20 results from an estimated 6000 matches similar to: "Audio playback problems with FC6 and Zaptel 1.2.16"
2007 Feb 21
3
Zaptel 1.4.0
I go to my Zaptel 1.4.0 folder and run ./configure; make linux26; make
install and I don't see any errors. This is out of my modprobe.conf:
install tor2 /sbin/modprobe --ignore-install tor2 && /sbin/ztcfg
install torisa /sbin/modprobe --ignore-install torisa && /sbin/ztcfg
install wcusb /sbin/modprobe --ignore-install wcusb && /sbin/ztcfg
install wcfxo
2007 Mar 15
1
Re: zapata with Tiger3XX compilation error
Ok so I read the Linux 2.6 related README and finally
compiled propperly, I thought but at the end I notice
that lscpi does report the cards, but I cant modprobe
wcfxo nor zaptel and I do have wcfxo.ko in the
/lib/modules/2.6.8/extra/ directory, so what gives?
This is a Debian Sarge, thanks!
#
# make clean starts here
#
make[1]: Entering directory
`/usr/src/zaptel-1.4.0/menuselect'
rm
2007 Oct 24
5
OSLEC and zaptel-1.4.5.1
Hi all,
After reading great things about the OSLEC Echo Canceller
(http://www.rowetel.com/ucasterisk/oslec) and seeing the reactions of
people who have tried it on a recent Trixbox thread
(http://www.trixbox.org/forums/trixbox-forums/open-discussion/need-people-echo-problems),
it sounds like it is the "bees knees" for sorting out echo problems with
cards like the x100p.
Has anyone
2007 Dec 04
1
Soundcard necessary on an asterisk server toget output of playback()??
Hi,
>However, I believe that zaptel >= 1.4.6 or zaptel 1.2 >= 1.2.21 should
>support hires timers for timing on kernel >= 2.6.22 .
>
>What version of Zaptel do you use?
>
I was using version 1.4.5.1
I just downloaded and installed version 1.4.7, configure/make/make
install finished without an error, but when is used
modprobe ztdummy
the system said:
FATAL: Error
2007 Feb 19
1
Problems with CentOS ztdummy kernel 2.6
Hi List,
I am having some trouble with installing the latest version of ztdummy on a
CentOS Kernel 2.6 system.
I have installed a few Asterisk systems on Slackware Kernel 2.4.x without
any issues, unfortunately there is no choice about this distro, or kernel as
it has been preinstalled by someone else. And so I am in the dark with an
unfamiliar distro and kernel.
I am fairly sure the
2007 Mar 16
2
Error compiling zaptel 1.4.0
Hi all,
I decided the best way to get to know * well is to do it from
scratch. Having read the majority of the "Asterisk: The Future of
Telephony" I am now attempting to compile zaptel 1.4.0 and am receving
the very same series of errors mentioned in this post on the forums:
http://forums.digium.com/viewtopic.php?t=13619&highlight=zaptel1+++zttranscode++error
However, there has
2007 Dec 03
2
MeetMe Conference on Asterisk-1.4.13
Hello all,
I am planning to setup a MeetMe conference functionality on
Asterisk-1.4.13without having a Zaptel card. All users will be
calling through SIP only.
AFAIK, the said application needs a timer which makes use of the ztdummy
module. I have basically two (2) problems I am encountering here that [1] I
can't load the ztdummy.ko module and [2] Asterisk don't run when running it
2008 Jan 17
1
Zaptel timing on TE405P
Hi,
I'm wondering why zttest shows
Best: 99.976 -- Worst: 99.967 -- Average: 99.971469, Difference: 99.971469
Shouldn't it be 100% as timing is hardware and comes from PRI? Am I
missing some kernel config?
Regards,
Atis
My /etc/zaptel.conf is
span=1,4,0,esf,b8zs
span=2,3,0,esf,b8zs
span=3,2,0,esf,b8zs
span=4,1,0,esf,b8zs
#lspci
07:03.0 Communication controller: Digium, Inc. Wildcard
2007 Sep 14
0
Zaptel ztdummy module causes playback to fail
I'm using asterisk 1.4.11 and Zaptel version 1.4.5.1 with kernel
2.6.22. I have the ztdummy module loaded, which is using zaptel and rtc.
When the ztdummy module is loaded, sounds are not heard when using the
asterisk "background" command. When the ztdummy module is unloaded,
which also removes zaptel and rtc, sounds are heard.
I've also tested this under kernel 2.6.21 with the
2006 Dec 14
4
Zaptel under FC6
Hi, all
I am building a new server. Have installed FC 6 and put in TDM400 card.
Checked out latest asteriusk code, run make install in zaptel directory.
So far all is fine.
Now I am trying to install the drivers.
# modprobe zaptel
FATAL: Module zaptel not found.
Fair enough, no zaptel driver is found on the system.
Is there are any known problems with FC6? I did not have much trouble
running
2007 May 19
1
Zaptel hangs machine...
Hi all.
When i do a "service zaptel stop" on my machine,sometimes it crash and i
must unplug and plug the power cord to restart the machine. Also sometimes
load zttranscode and wct4xxp, and oter times wct4xxp only... it's running
centos 4.4, libpri 1.2.4, zaptel 1.2.17.1 and asterisk 1.2.18. with a
TE212P.
Can somebody help me?
Regards.
2007 May 22
1
Kernel Panic in wct4xxp during unload on Zaptel-1.4.4
I attempted an upgrade of our production system from Asterisk/Zaptel 1.2 to
1.4 this weekend. Intially everything looked like it was working properly,
but some time in the day following the upgrade, the system died to a kernel
panic. I wasn't able to catch the entire kernel dump on the console
unfortunately.
I attempted to isolate the panic, and found that when 'service zaptel stop'
2009 Feb 09
2
meetme application
hi guys:
recently I want to buinding a meeting confence on asterisk and use the meetme application.
I have a ztdummy kernel
afteri the lsmod commond:
ztdummy 5768 0
zaptel 182660 28 zttranscode,ztdummy
crc_ccitt 3008 1 zaptel
I also configure the meetme.conf
conf => 1000;
my extensions.conf
[default]
exten =>
2007 Mar 25
1
ztdummy install in the new zaptel 1.4.1
HiI don't have any digium cards and only want to install ztdummy with all asterisk functions. What I will need with ztdummy and what I can disable?Thanks a lotDmitri************************************ Zaptel Module Selection ************************************* Press 'h' for help.
2006 Nov 15
0
Zaptel 1.4.0-beta2 compile error
I'm getting the following error trying to compile zaptel 1.4.0-beta2 on
my RH9 (2.4.20-8smp) system. Can anyone shed some light on this?
zttranscode.c: In function `zt_tc_mmap':
zttranscode.c:387: warning: passing arg 1 of
`remap_page_range_Rsmp_d8cd9cb2' makes pointer from integer without a
cast
zttranscode.c:387: incompatible type for argument 4 of
2007 Apr 25
1
Problem with SuSe 10.0 and zaptel 1.2.17
I installed zaptel 1.2.17 and shortly afterwards got a problem of calls not clearing properly. I ran dmesg which showed
Unable to handle kernel NULL pointer dereference at virtual address 0000009c
printing eip:
f8a79fa8
*pde = 00000000
Oops: 0000 [#1]
Modules linked in: zttranscode button battery ac ipv6 edd wcte11xp zaptel crc_ccitt i2c_i801 i2c_core tg3 generic shpchp pci_hotplug
2004 Aug 17
0
has no CRC! error messages while compiling zaptel
I get this warnings while compiling zaptel
Any suggestions would be very helpfull.
make -C /usr/src/linux-2.6 SUBDIRS=/usr/src/bri-stuff.0.1.0-RC4/zaptel
modules
make[1]: Entering directory `/usr/src/linux-2.6.8.1'
CC [M] /usr/src/bri-stuff.0.1.0-RC4/zaptel/zaptel.o
/usr/src/bri-stuff.0.1.0-RC4/zaptel/zaptel.c:163: warning: `fcstab' defined
but not used
CC [M]
2009 Mar 17
2
DAHDI or Zaptel doesn't compile against 1.4.24
Hi,
We installed the latest 1.4.24 on a test machine and can't get zaptel
nor dahdi compile. It's a Linux Debian Etch. Errors we have:
keewi:/usr/src/dahdi-linux-2.1.0.4# make
make -C /lib/modules/2.6.18-custom.2/build ARCH=i386
SUBDIRS=/usr/src/dahdi-linux-2.1.0.4/drivers/dahdi
DAHDI_INCLUDE=/usr/src/dahdi-linux-2.1.0.4/include DAHDI_MODULES_EXTRA="
" HOTPLUG_FIRMWARE=yes
2007 May 03
2
zttranscode crashes server
I was just looking to see if anyone else has seen this problem as well.
When asterisk starts up it loads the zttranscode module. The problem
exist when I use the init scripts to stop asterisk and then use the
zaptel init script to unload modules. Since the zaptel init script
didn't load the zttranscode module it will error out when trying to
unload the modules.
I built
2007 Dec 03
3
Anyone here using JUNGHANNS.net douBRI 2.0 ISDN ?
Hi,
I'm very new to asterisk and managed to set one up in debian, I
installed via apt-get the asterisk and asterisk-bristuff packages. I
downloaded the bristuff source as well.
I managed to get as far as loading the following modules:
zaptel 199144 4 cwain,zaphfc,zttranscode,ztdummy
But the problem now is that all channels that I try to configure gives
me an error that