similar to: Trouble outgoing VOIP Provider Calls

I did a NoOp and see what the callerid was and when coming from the SIP Ext->Voip it is set to the Extension Number of the SIP Extension (as you would expect). When coming from the Panasonic the CallerID is blank, I tried setting it to nothing again, and I tried setting it to the callerid of the voip provider, a sip extension id, the extension number on the Panasonic side, the zap channel

I have a weird problem.... Asterisk 1.4 E100P connected to a Panasonic TDA phone system Here is what I get SIP Ext -> Panasonic Ext No Problems Panasonic Ext -> SIP Ext No Problems SIP Ext -> VOIP Provider No Problems Panasonic Ext -> VOIP Provider Errors ---------- Working SIP -> VOIP -- Executing [903........@from-sip:1] Dial("SIP/610-097aee60",

Hi, Running Asterisk CVS-Head latest on a Dual P3 800 1Gb Ram. For some odd reason now that I have the asterisk box almost to the stage I want it, I hit a problem. I have a te405p in the system, Zap/g1 is connected to the telco as an ISDN 30, Zap/g4 is connected by ISDN Primary Rate to an Ericcson BP250 phone system. When calls come in on g1 they go straight through instantaneously to the

https://bugzilla.samba.org/show_bug.cgi?id=5554 Summary: File has vanished for files with foreign/unicode characters Product: rsync Version: 2.6.9 Platform: x86 OS/Version: Windows XP Status: NEW Severity: normal Priority: P3 Component: core AssignedTo: wayned@samba.org

On this macro I keep getting exited non-zero on s,3, but s,3 is doing what it is suppose to do but the macro stops. Is there a way to make a macro ignore errors and continue to s,4? I have the lattes ver of sox 12.17.4. Also if I just run this line from the command line I don't get an error. [root@redhat monitor]# sox in.wav in-rev.wav reverse [root@redhat monitor]# [macro-record-cleanup]

This is what I'm doing it gets you both sides of the phone call...small size...and playable on windows through a share. My notes: On redhat 9 I have to run the following command for asterisk to start LD_ASSUME_KERNEL=2.4.1 asterisk -vvvvgc [macro-record-on] exten => s,1,SetVar(CALLFILENAME=${TIMESTAMP}-${ARG2}-${ARG1}) exten => s,2,Monitor(wav,${CALLFILENAME}) ;exten =>

Hi Folks, I've been playing with call recording for our support department which was kinda going ok until I spotted something odd in the CDR. None of the support calls are being entered into the CDR properly. I'm using mysql as the back end and Areski's web based front end and all was going fine. The problem seems to be that the CDR doesn't get populated with the destination

Hi, I am having difficulty getting my record phone call dial-plan script working. I have tried the example record call scripts but they start recording before they are actually connected to an end point, e.g. you get ringing or announcements being recorded. It seems to me that these are bugs with the Dial() command: 1) Using M(x) in a dial command does not allow argument to be passed. Using

[apologies for no line wrap; config lines at bottom] I have mentioned on several threads here that the Monitor application doesn't do exactly what one would expect: the originating and answering legs of a call are unsynchronized by the duration of the interval that it takes for the answering leg to pick up the phone. This can be very distracting in a final mixed version of the file. Brian

I'm trying to set on-demand call recording. Here's a snippet of the pertinent dialplan. The purpose of this is to allow one user in particular to be able to receive an email recording of the call everytime he dials *91 + number. The problem is that the email is not going out or being generated when I use the ${CALLFILENAME} variable. When I use the actual file name of the gsm recording,

Hello, I have this setup: Telco --PRI(g1,ext-incoming)--> Asterisk TE405P --PRI(g2,int-incoming)--> Alcatel OXO extensions.conf: [ext-incoming] exten => _X.,1,Noop exten => _X.,n,SetVar(CALLFILENAME=${TIMESTAMP:0:4}/${TIMESTAMP:4:2}/${TIMESTAMP:6:2}/${TIMESTAMP}-${UNIQUEID}-${EXTEN}) exten => _X.,n,Monitor(wav,${CALLFILENAME},b) exten => _X.,n,Dial(Zap/g2/${EXTEN}) exten =>

Hi I've got a script like this exten => s,1,SetVar(CALLFILENAME=/var/www/recordings/${TIMESTAMP:0:8:7}/${UNIQUEID}) exten => s,2,AGI(recordstart.py,${ARG1},${CALLERIDNUM},${CALLFILENAME},Ind) exten => s,3,DIAL(ZAP/g2/${ARG1},70) exten => s,4,AGI(logerror.py,${ARG1},${CALLERIDNUM},${CHANNEL},${DIALSTATUS},${DATETIME}, ${CAUSECODE}) exten => s,5,hangup exten =>

I have a question on how to handle the "h" routines. I have noticed that if the call is hung up by the side that originated the call, the "h" routine is not extendable via a macro, or at least I have been unable to do it. My tests have included only SIP->SIP calls. If the originating side hangs up first: The macro is called from "exten =>

OK. I now have call recording working for both incoming and outgoing calls. Now I want to make those wavs into mp3. I could launch a script from cron that checks for new wavs and converts them. But that wouldn't be so elegant. Launching it from * on hangup would be nicer. How is it done? [outgoing] exten => _0.,1,SetVar(CALLFILENAME=${EXTEN:1}-${TIMESTAMP}) exten =>

I thought I would post this in case it might be of any use to anyone. Not anything special but it does work. Keep in mind you need sox and wmix. Here is some relevant exerpts of my extensions.conf using John Todds macro. [globals] CALLFILENAME=foo FOO=foo CALLERIDNUM=foo [default] exten => 287,1,Macro(dial,SIP/agent20002|20) exten => 287,2,Voicemail(u287) exten =>

Hi all, I'm trying to make a context that will monitor a call and when it's completed it would e-mail the wav to a specified mail adres. So I made a standard context that records a call, like this: exten => _*31*00[1-9].,1,Setvar(CALLFILENAME=CALL-${EXTEN:4}-$ {TIMESTAMP}) exten => _*31*00[1-9].,2,Monitor(wav,${CALLFILENAME},m}) exten =>

I currently have in extensions.conf: exten => 106,1,Set(CALLFILENAME=${TIMESTAMP}_${CALLERID(num)}) exten => 106,n,Monitor(wav,${CALLFILENAME},m) exten => 106,hint,SIP/106 exten => 106,Macro(stdexten,106,${HINT}) When I called x106 this was logged: -- Executing [106 at voicemenu-custom-4:1] Set("DAHDI/7-1", "CALLFILENAME=_xxxxxxx") in new stack --

I have a little call recording script that I am running and it works fine, but I have one problem. I get CDR when a user calls into the extension, but I do not get CDR for the call that it makes outbound on # 17. Any idea why? Here is the extensions info: [default] exten => 2211,1,Answer exten => 2211,2,Wait(1) exten => 2211,3,Playback(/etc/asterisk/recording/getshop) exten =>

I am trying to record a call into a stereo mp3 in Asterisk 1.4, but I can't seem to get it to work correct. Could someone point me to what I need to do? I have attached what I believe are the relevant parts. [globals] ; script to be executed when monitoring has been finished MONITOR_EXEC=/usr/local/bin/2wav2mp3 ; uncomment this line if you are using Ogg Vorbis

I have setup as per the monitor example configuration on the wiki site and all works well for an extension dialing 8 then the number. However, if I dial from an AGI script the recording stops after a few seconds. I see an extra answer in the console and suspect that is the reason. Could any kind soul help me to get around this? Extensions.conf.. exten =>