similar to: Rhino cards lock up system -- anyone else ever seen this?

Hi all, I'm trying to insert a Rhino Ceros box equipped with a Rhino R2T1 dual-T1 card and running the latest version of Trixbox (2.4.2) between the central office and a Nortel Option 11. The switch at the CO is a DMS100. Basically, I'm taking the T1, connecting it to port 0 on the R2T1 card, and then connecting port 1 to the Nortel. (Actually a CSU and then the Nortel) We're running

Hello I have an interesting situaltion and not sure if I am doing something wrong or it is a BUG. I Installed Rhino Channel on T1 line and connected Analog Phone on Rhino's Zap Channels. When I pickup analog phone and hangup without dialing any number , I am getting extra ring after hangup and if I dial any digit than there is no ring on Analog phone after hangup. Log's looks like this

Just saw these new Asterisk compatible cards at Rhino's homepage. Anyone has experience with these babes? http://www.rhinoequipment.com/index.html http://www.rhinoequipment.com/t1card.html The 4-port FXO looks interesting. Looks like a very clean design. Leo

hello guys... well as my first post i want to say when i try to install rhino it says: ...The installer requires Windows installer 3.0 or newer... so when i try to download that (as a last resort [Wink] ) it fails... so if anyone can help thats great but if not... well this thread is mainly an error report... Thanks! Trey.

Had a fairly horrible lightning storm night before last, and four of eight ports in a 1.4.20 machine stopped answering. In the CLI: budsw*CLI> zap show channels Chan Extension Context Language MOH Interpret pseudo default en default 1 from-zaptel en default 2 from-zaptel en default

Hey Aaron, I''m just thinking out loud here, but have you considered the possibility of using the Rhino [1] library to implement javascript support in mechanize? It''d create a jruby dependency for that feature, but still. Just thought I''d bring it up while I was thinking about it. -Mat [1] http://www.mozilla.org/rhino/

Hi! I'm a new member in VoIP world. I want to implement a VoIP PBX using asterisk/tribox in the office but I have one doubt. Which is the best way to use actual PSTN lines in the VoIP PBX? Using a box as Linksys SPA400 or installing a PCI card (Rhino/Digium...) into the server? Which benefits/problems will I have with each option? Regards -------------- next part -------------- An HTML

Hello I have an interesting situaltion and not sure if I am doing something wrong or it is a BUG. I Installed Rhino Channel on T1 line and connected Analog Phone on Rhino's Zap Channels. If i pickup analog phone and hangup without dialing any number , I am getting extra ring after hangup and if i dial any digit than there is no ring on Analog phone after hangup. Log's looks like this

Hi Folks, having an issue with outbound calls through a VOIP provider. Calls get sent out with the CallerID(number), but where does callerID(name) come from? Apparently not from provider, as we are seeing different (sometime missing) names on inbound calls, different than what we have configured. Apparently this comes from some telco database somewhere? Numbers were ported from a wired-telco.

I am testing analog phone and fax machine plugged into Rhino Channel Bank which is connected to TE412P card. This site is in China. I am running RHEL 5, Asterisk 1.4.21.2, Zaptel 1.4.11 and libpri 1.4.4 I ran into a problem which is analog phone can hear dial tone and can make outgoing calls. Another phone (ether internal or external) can call the analog phone ***but the phone does not

The if() statement always evaluated to true. Detected by "cppcheck", not tested on real hardware. Signed-off-by: Thomas Jarosch <thomas.jarosch at intra2net.com> --- drivers/rhino.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/rhino.c b/drivers/rhino.c index ca66169..e478bcb 100644 --- a/drivers/rhino.c +++ b/drivers/rhino.c @@ -187,7 +187,7

Hello there, Offending source code is ????? if(? ( BattVoltage> 129 ) || ( BattVoltage < 144 ) ) Maybe swap || for && would be better. This problem I found by using cppcheck. It said [rhino.c:190]: (warning) Logical disjunction always evaluates to true: BattVoltage> 129 || BattVoltage < 144. Regards David Binderman

Anyone have any experience with the Rhino T1 channel bank? It looks very cost effective at around $1300 for 24 lines but I haven't seen it mentioned on the Asterisk list yet.

Anyone ever experience noise instead of a dial tone. We are using a Digium TE410P and 2 units of Rhino FXO & FXS Channel Bank. Everything works well when they are freshly turned on or rebooted, but after a while there's only noise can be heard instead of dial tone. Does this have anything to do with the timing configuration? Where is this time is generated from, is it from the TE410P card?

Has anyone else encountered this? I have a fairly large installation (~50 phones, almost all Polycom 501's and a handful of 601's. We're running into a number of phones on which the outbound voice (Polycom phone user doesn't hear any problems, but the other end does) is breaking up occasionally -- enough to be noticeable and make you say "what?". In each case, rebooting

Anyone know if Rhino is planning on supporting zaptel 1.4 anytime soon? ________________________________ This e-mail, facsimile, or letter and any files or attachments transmitted with it contains information that is confidential and privileged. This information is intended only for the use of the individual(s) and entity(ies) to whom it is addressed. If you are the intended recipient, further

Has anyone ever heard of this so called Dynamic Impedance matching on the ADIT 600? I called their support and they've never heard of it. We are of course having echo problems are on the far end due to digital/analog conversion on the local end using a channel bank. We have purchased an ADIT 600 and yes the complaints are "far less" however we're still getting them. While I have

How do you transfer or re-park a call that's been picked up from a parking lot? I don't see any options for specifying the transfer options on the parked call, so that you could transfer or repark it. -- Barry D. Hassler President, HCST http://www.hcst.net/ 937-427-9000 -------------- next part -------------- An HTML attachment was scrubbed... URL:

I've tried to find other threads with this same topic, but haven't found any... Apologies if this already being discussed.... Running asterisk 1.4.13 (upgraded from 1.4.9) and zaptel 1.4.4. Having an issue with (I think) parked calls. We tend to park calls, but we're often not able to pick them back up, or the other party says they get dropped, etc. There doesn't seem to be a

--- Arjen de Korte <nut+users at de-korte.org> wrote: > > > I also did: > > > > # ./megatec_usb -DDDDD -x vendor=06da -x mfr=OMRON > > /dev/usb/hiddev0 > > Please have a look at 'man 8 megatec_usb' again. > > You probably need to specify the '-x vendorid' and > '-x productid' options > and most likely, the