similar to: VoIP-GSM gateway problem

Here is a part of a working sip.conf for Asterisk with SNOM190 Phones. Try using host=dynamic and have a closer look at the configuration in the snom 190. Also, try using dtmfmode=rfc2833 . [general] realm = hallinux2.gwsnettech.local port = 5060 bindaddr = 0.0.0.0 context = default disallow=all allow=alaw allow=ulaw allow=gsm register => 081503:xxxxxx@sipgate.de/081503 language=de tos=0x04

We just upgraded from 2.1.16 to 2.2.13. One user is experiencing problems when using the shared namespace. Specifically it happens when opening/reading a message and when deleting messages. These functions work for other users. So far, this appears to be only affecting one user. The shared folder is a local ext4 file system and utilizes acls # 2.2.13:

Hello, I'm attempting to get Asterisk running for the first time in my company. As I've never used it before, I am creating a small testbed with which to learn Asterisk and get the kinks worked out before attempting to roll it out. I have * compiled and running, and built the sample config files as suggested by the Wiki. I got my Snom 190 configured to use DHCP, and have created an

Hi, The dialin conference via asterisk is over, one person is still in the conference room and accidentally does not hang up properly. Her meter at the phone company keeps running... I'd like to implement something to the effect of checking whether there is only one participant in the conference, and when this is the case, to cancel the call after a predefined time (perhaps 5 or 10 mins.

Good day all I have asterisk on a box with one network card I have a 2 companies setup on the system. To keep all apart I binded a different ip to the interface,i,o,w eth0 192.168.0.254 and eth0:1 192.168.1.254 And in sip.conf I took the bind setting out So each company's phones are on a different ip range,and all worked well So we decide to pull the snom190 out and exchange it with a snom360

Hi, I am using SNOM phones with Asterisks for few years. They used go occasionaly NR, and I would reregister them from the phone web interface. But it started doing frequently for last few months. Here are SNOM Phone and the firmware version; snom190-SIP - Version-Code: snom190-SIP 3.56m snom320-SIP - snom320 jffs2 v3.36 snom300-SIP - snom300-SIP 6.5.2 Asterisk version - Asterisk

Greetings All- I have an * box with the NuFone H.323 channel driver installed. I also have an Altigen VoIP system with a PRI to the PSTN. I can sucessfully make a call from a SIP extension (snom190) to an H.323 extension (altigen phone) The thing I can't seem to make work is a call from a H.323 phone to a SIP extension. Here's the layout:

I don't think it's the snom, (the break key is set to "off") the "#" key is not being interpereted by the PBX as an attempt to initiate a transfer. Is this an error in my extensions.conf? Brian > >Message: 4 >Date: Wed, 15 Dec 2004 19:39:39 -0500 >From: Info <info@idatasys.com> >Subject: Re: [Asterisk-Users] Help with transferring a second call

Hello I want to set readonly over IMAP for users mailboxes at Archive namespace, (and have single user who can move mails there on automated way) This don't work but found that if I add file to /srv/mail.archives/<user>/dovecot-acl containing only owner lr then login to imap (with telnet) and do 1 GETACL Archive I get following result from gdb attached to worker process serving

Hello List- I'm having a problem getting snom 190 phones to transfer a call to another local extension. Here is the scenario: A call (call1) comes in from the PSTN to (exten1). (via pri, if that matters) Another call (call2) comes in to (exten1). (call1) is put on hold while (call2) is answered. (call2) is then transferred to (exten2) using the "Xfer" button on the snom phone. This

Hi, I have searched and searched, but cannot identify what is happening here... I have several snom190 phones, and all of them have the 5th function key set to call "asterisk" by using the "destination" option. This automatically causes the phone to SUBSCRIBE for NOTIFY messages for the "asterisk" destimation. Asterisk does not seem to like the SUBSCRIBE requests.

Hi guys/girls, We are running a TDM04B card with Asterisk in a Linux box that has 15 GrandStream102 extensions and 1 SNOM190 phone which we are using as an operator console. The FXO ports in the TDM04B are plugged directly into our telecoms provider's analogue lines. Something I've picked up with the SNOM is that sometimes when there are two active incoming calls via Zap channels they end

Hi guys/girls, We are running a TDM04B card with Asterisk in a Linux box that has 15 GS102 extensions and 1 SNOM190 phone which we are using as an operator console. The FXO ports in the TDM04B are plugged directly into our telecoms provider's analogue lines. Something I've picked up with the SNOM is that sometimes when there are two active incoming calls via Zap channels and the first

Hi, I have some issue with voice mail with ODBC on asterisk 11.7 box. I may not understand database functionality on asterisk fully. The most suspected area is func_odbc. I already googled but not luck. Your guide is warmly welcomed *Error messages when I make call and leave message.* -- <SIP/1ffa9-00000007> Playing 'auth-thankyou.g722' (language 'en') [2014-05-28

Hi All... I'm trying to get the intercom feature working on some snom 190 phones but having no luck... As you can see from the SIP trace below (from the called phone), intercom=true is being appended to the To: header as per requirements. I've email'd snom a few days ago but have yet to get a response. On my 190s, im running snom190-SIP 3.57v. I am pulling the config for the

Hi, I'm chasing a bug in chan_sip.c where Asterisk is removing the rport parameter out of the via headers. Here's my scenario: UA -> Snom NATf -> Snom 4S Proxy -> Asterisk Echo Test Function NATf, the proxy, and Asterisk are all on public IPs. So my question is: In chan_sip.c, copy_via_headers function, I see an if statement testing for "(ast_test_flag(p, SIP_NAT) ==

When I'm running "rsync --compare-dest" on a local Linux volume (ext4) it works as expected (duplicate files not created) however when same commands with same options are run on NTFS USB drive (in my scenario below mounted to /share/external/sdt5) all the files are copied regardless if they have been updated or not. I have spent many hours trying to figure out what could be wrong and

I am just playing with a SNOM 190. Overall, I'm very impressed with the quality of the unit and the feature set. I am running the latest firmware (snom190-SIP 3.57u) and the asterisk CVS from last night (1/3/05). The only problem that I've encountered so far is with Call Forwarding, which doesn't work at all. The Snom phone is sending a "486 - Busy Here" back to *, which

Hi, I want to pick up a call with the snom's programmable buttons(snom190 -SIP 3.60x, snom360-SIP 4.1) with asterisk server (v 1.2.0), I tried with the option 'Destination' and when the incoming call arrive to another snom phone the button blinking. In this way I can only pick down it pressing the blinking button. The solution is call the *8 or parcking the call but my pbroblem

Hi, in the Snom FAQ I found the following information: After staring up, the phone tries the URL given in the "Setting URL" of the phone. ... BTW this setting can also be set via DHCP. .... option tftp-server-name "http://192.168.0.9/snom200{mac}.htm" The documents used: FAQ-04-06-14-sf.pdf "Setting up DHCP for snom phones" FAQ-04-03-24-sf.pdf "How can I