similar to: how can PRI, BRI and analog cards achieve a synchronous clock / timing

Hello, I switched from my PSTN provider to a voip provider. (Voicedata in the Netherlands) >From the moment i switched all inbound calls are terminated after aproximatly 1 minute. The provider tells me it's not their issue since I have no other configuration than all their other users. What can I do. I removed all asterisk functionality by forwarding the inboud call directly to a local

hi, we are currently planning are large site which will migrate from an old siemens hicom pbx to asterisk. the customer is currently using a paging system (small receivers which display a callback number and a base station (transmitter) with several antennas at the site) the problem is, that the currently operative base station uses 4 ISDN BRI interfaces. But the protocol is old germany 1TR6

hi, i'm a bit puzzled because i do not get include and hint to work with the new realtime enginge (cvs-head from 2004-12-09). other things (sipfriends and "normal" extensions) work perfect with the realtime engine. the entries in the static extensions.conf file i used before where: exten => 183,hint,SIP/snom220 exten => 183,1,Macro(stdexten,443,SIP/snom220,183) exten =>

hi, after stumbling over the compile time flag in zaptel and after reading the new features of the 2nd generation firmware of the TE405P/TE410P, i was wondering if the cards are capable of upgrading the firmware in field? regards frank

Checkout Beronet ISDN cards and Berofix Gateway (appliance or pci card) Personally for my last installation I chose Berofix card which is rock solid and reliable, yet easily configurable. With berofix you don't need telephony drivers on the host system, the isdn card is detected as a NIC and all configuration is done using a web interface. Then you configure FreePBX a new trunk to use the

Hi all, I would like to announce the first release of the chan_capi channel driver on sourceforge.net The package is available for download with name chan_capi-cm-0.5 and is the current CVS HEAD. It is derived from the chan_capi-0.4.0PRE1 of kapejod. The main changes are: - complete rework - fix race-conditions - fix call state handling - rework of debug/verbose messages - added capiFax

hi, well, most of the things work right now due to the help of peter svensson, but after heavy use of our ericsson BP250 today several problems appeared. i split into several mails as they are seperate problems. * i can't signal Busy to the calling party. asterisk receives busy from the ericsson PBX but does not forward this to the external caller. i tried with exten =>

Hi, I have a couple of questions about Quad-BRI solutions for Asterisk, and was hoping that I might get some feedback based on other people's experience. We currently use the Junghanns card, which is a pure Zaptel solution, which is fantastic, but they have no hardware EC solution, and their drivers are becoming increasingly un-stable with time (I back-port to a modified qozap driver from

hi, after several problems getting the right callerid on a E1-PRI there is (so far) only one problem left: when receiving calls over the telephone network from another E1-PRI that has a "Caller ID no screen" capability (e.g. a bank and a customer of us), asterisk does not get the callerid that is set up by the calling PBX, but the callerid of the trunk of the calling PRI. no matter

Hi, please whoever has some expertise in choice of BRI ISDN cards, please restore my faith in community support :) (on private email I can probably explain more than fits for a public forum) Most I'd like to ask is about what to choose, out of what is available... My locality is United Kingdom, lines from British Telecom (BT), but any advice / pointers (I googled around already) are

hi, we are currently planning are large site which will migrate from an old siemens hicom pbx to asterisk. it will be a slow migration, the asterisk server will be inserted between the telco E1 and the hicom. new phones will be sip ones. the customer has several fax machines and analog phones (some of them have to be explosion-proof). around 50 analog ports in total are needed. as we are in

Hi, I guess I'd need to run Beronet quad and octo bri cards under bristuff to get zaptel features (echo canceling, timing source).... Am I right or could I achieve this also with chan_misdn - their native driver ? Running bristuff on Beronet cards is unsupported. Has anyone succesfully run Beronet quad BRI cards under bristuff recently ? Do they work ? Regards, Rob.

hi every body, can anyone give me the right configuration of BRI cards; zapata.conf , zaptel.conf ans extensions.conf; please help -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090314/05d34a02/attachment.htm

Hello all, I'm trying to conect two asterisk servers using two B410p Digium cards. One card on each server. I just setting up the first BRI port on server A as nt_ptp and the first BRI port on server B as te_ptp. I use an ethernet wire to connect the first port of server A (nt_ptp) with the first port on server B (te_ptp) but the port light cotinues blinking on red on both sides once the

Hi all, We have been fighting with telco for a entire week. Today they came here with a LITE3000 to analyze what is going on. When I configure zaptel with no external clock, E1 gets aligned/synchronized with bit rate in 2048000 bps, both me and telco. span=4,0,0,ccs,hdb3,crc4 But when I configure span4 to get clock source from telco they become unsynchronized. TElco bit rate stays in

Hello, we are a firm who wants to develop some VOIP solutions. The first infrastucture we choose for development is: - an Asterisk machine connected to a traditional PBX (s0). In this way people is not (yet) obligated to migrate its extisting PBX (and analog phones) to VoIP. - The PBX will be then configured to redirect specific outgoing calls (i.e. a remote branch office) to Asterisk, that

hi, on our incoming E1-PRI from german telco Arcor the leading 0 for the (area access code in europe) and the 00 (country accescode in europe) are missing on incoming callerids. only prepending a single 0 is not the solution as suggested by some writers on this list, because there is no way to differ between national and international callerids and it's not possible to make the decission

Hi, I'm currently deciding on what card to pruchase for octo/quad BRI card to use with Asterisk on EuroISDN lines. I'm aware of at least two options (Junghanns or Beronet), but don't know how stable and well supported they are. Which ones are better supported ? Any experiences? Any advice ? How tos ? What would you buy ? Thanks in advance, Regards, Rob.

hi, i have the problem that i'm not able to set and receive the Service Indication (SIN) from our E1-PRI and from our ericsson BP250. The problem is, that the Bearer Capability (BC) together with the High Level Compatibility (HLC) and Low Level Compatibility (LLC) forms the Service Indicator (SIN). The SIN is used to determine if the call is voice, fax or data. It's essential to set

List, I have a TE410P (T1 mode, all PRI) and a T100P (fxoks, for fxs channel bank). I cannot seem to get the T100P to send any clock to the channel bank. I prefer that it use the same clock source as the TE410P, but it doesn't matter if it's not in sync just as long as it's there. The TE410P is configured 3x pri_cpe, 1x pri_net. The three cpe go to XO Sonus switch, the net to