similar to: sip_write warning when executing Pickup of CAPI

anyone has idea what problem can be here, something with codec but i have today CVS version and grandstream phone with 1.5.0 firmware.I try to change codec in phone and also in asterisk-sip.conf but the same. What can be problem ? tnx, Tomaz *CLI> -- Executing Dial("SIP/102-767c", "CAPI/2:5") in new stack -- Called 2:5 -- CAPI[contr1/2003002]/0 is making

We are getting the following on 1.8.3 and 1.8.4-rc2, HELP! Why is Asterisk unable to transcode to/from ulaw and g722? [2011-04-21 09:51:34] WARNING[22067]: chan_sip.c:6064 sip_write: Asked to transmit frame type ulaw, while native formats is 0x1000 (g722) read/write = 0x1000 (g722)/0x1000 (g722) [2011-04-21 09:51:34] WARNING[22067]: chan_sip.c:6064 sip_write: Asked to transmit frame type ulaw,

Hi Guys, I have a the following issue when I ma trying to place a call through my voip provider, I am using an asterisk 1.2.21.1, do you have an idea what could fix this issue (as you can see when the other party answered, the call get dropped because of probably sip incompatibility) Nov 12 14:31:30 WARNING[21432]: chan_sip.c:2587 sip_write: Asked to transmit frame type 256, while native formats

With asterisk 1.8.7.0 has been running ok for months. Now, this morning, it's crashing. I can restart it, but it crashes after 10+ minutes. It dies like this -- Executing [s at macro-stdexten:2] Dial("SIP/teliax-00000019", "SIP/176,18,rtT") in new stack == Using UDPTL TOS bits 184 == Using UDPTL CoS mark 5 == Using SIP RTP TOS bits 184 == Using SIP RTP

Hello Does anyone have any experience with configuring BT (British Telecom) ISDN2e lines to work with Patton SmartNodes - and then Asterisk? I have a Patton SmartNode 4638, which is now connected to 3 x ISDN2e lines - and in turn connected to our internal LAN. I'm having huge issues configuring the SmartNode to successfully "see" the ISDN channels - and to be honest, I'm

Hi list! I have 4 numbers on my Asterisk 1.8. 3 work perfectly, the 4.th not. I'm not sure, when it finish to work, since a month ago it runs without any problem... Well, if I will be called on this number I can't hear anything and in Asterisk I see these: [Jul 15 18:59:55] WARNING[8752]: channel.c:5060 ast_write: Codec mismatch on channel SIP/00493514977290-000001d1 setting write format

Starting with Asterisk 13.1 we are seeing this WARNING messages a lot in our logs and console: WARNING[25164][C-0004865e]: chan_sip.c:7364 sip_write: Can't send 10 type frames with SIP write) We found that line in function "sip_write" inside "chan_sip.c". In our previous version (11.2.1) we did not see those messages being printed (same verbosity level). We compared

Hi, I have just signed up with Voxee.com and have attached my Asterisk server to dial them via IAX2. Below is the start of the log which dials the number and promply hangs up when the call is answered, with the logs saying that the channel is not compatiable. I have traced this down to the g.729 codec which I don't have installed. Any ideas on how to force that the codec not be used?

Hello Does anyone have any experience with configuring BT (British Telecom) ISDN2e lines to work with Patton SmartNodes? I have a Patton SmartNode 4638, which is now connected to 3 x ISDN2e lines - and in turn connected to our internal LAN. I'm having huge issues configuring the SmartNode to successfully "see" the ISDN channels - and to be honest, I'm lost as to how to then

I know I asked this some time back, and I got no response then, and neither did someone who asked at the start of 2009 either by the looks of it (other than a reply from me to use a PCI card!!!) However I now have a client who'd bought one of these boxes and installed ISDN2e - against my advice (because I got no feedback here, therefore they're junk with asterisk, right?) However

I am going to try and use a passive AVM fritz BRI card for my * setup.. Here is the thing.. I need to order my BRI from BT.. The service that looks to be the one to use is what they call ISDN 2e becasue this has the option to setup hunt groups across multiple ISDN2e lines so I could add another line later to get 4 channels.. According to the BT website in order to use the hunt grouping across

Hi all! Quite a mystery. The following happened when I was on holiday, and no one else has changed any configs of either Asterisk or the Cisco's in the building... The situation: Incoming works fine on all phones. Outgoing only works from non-Cisco phones. When calling from a Cisco phone to an external phone, all the Cisco-user hears is a ticking crackle and after about a minute the phone

I have an Asterisk box running happily under Fedora Core 2 with a X100P and a TDM400P, and now I'd like to integrate it to my ISDN2e connection using either an AVM Fritz PCI card or an Eicon DIVA passive card, both of which I have sculling around. I've successfully used the AVM card under RedHat 8.0, but I'm having difficulty finding information on running it under the Fedora 2.6

Can anybody recommend an ISDN2e card that is a reasonable price. Also, does anybody know if the AVM B1 V4 card has the echo problems, I believe I saw somebody mention they had echo problems on the V3 card. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030507/c7cc9e15/attachment.htm

Morning Asterikians, I've just got my nice shiny quadBRI card, and it seems to be working very well - except for one little issue - CallerID. The card is currently connected to an ISDN2e line in P2P mode, and an S0 adapter on our existing alcatel PBX. The S0 connection recieves callerID and displays it correctly - the 2e line doesn't, and BT have said that CLID was enabled on the

Hi all, I've been playing about with Asterisk for years now on and off, just SIP to SIP calls, using FWD and suchlike. I'm moving house at the beginning of September and have decided to build an Asterisk based system for my home office. I'm in the UK and wonder if anyone can give me advice on lines and hardware to use. Had planned to go with an ISDN2e line coupled with a BT

Good afternoon list. I'm experiencing a problem with my SIP channel's. When I have an external connection for one of my SIP carrier's, I can listen to the client and the client listens to me normally. The problem is when I will transfer this connection, the call is mute for the extension I have transfered. Only the client hears normally. In the console of Asterisk generates the

Good day! Have a weird problem with HT-286 and Conference room. I use Asterisk CVS-HEAD-06/04/04. Here it is: When HT-286 get into the conference room first and nobody in that room everything seems ok (with any codec HT286 allowed), but when HT-286 get into conference room when somebody already there, have got different HT behavior: 1. When HT use GSM codec => it connects to conference room,

Hi everyone, I have an issue which is kind of a catch 22 situation. I had outgoing calls to my new PSTN provider working perfectly. Then I started focussing on incoming calls. It seems that I can solve an error which gets my incoming calls working but that in turns means my outgoing calls don't work. - Strange. Anyhow I was getting an error: Process_sdp: No compatible codecs! And from

Anyone have a quick recomendation for a 2-port (ie. 4 channels) BRI (ISDN2e) card in the UK? My usual source has 1 port and 4 port, but no 2-port cards... Thanks! Gordon