similar to: channel.c: Unable to request channel ZAP

Hi Guys I have a 4 port PRI card that I need to setup each port in their own group. In chan_dahdi.conf I have the following which works for one port How do I add the rest of the ports in their own groups so that I can have different signaling on each? [channels] language=en switchtype=euroisdn pridialplan=unknown resetinterval=600 echocancel=yes echotraining=yes

4 Port PRI sangoma a104 From: jg [mailto:webaccounts173 at jgoettgens.de] Sent: Wednesday, March 18, 2015 2:09 PM To: Andrew Colin; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] 4 Port PRI I have a 4 port PRI card that I need to setup each port in their own group. In chan_dahdi.conf I have the following which works for one port How do I add the rest

Hi all, I need your lights :) There are many hardware provider for E1 cards on the market, what's your exeperience with E1 and what's the preferred provider for Asterisk out of Digium? Olivier

Hi List, I am using Asterisk 1.6.2.18. One strange problem come into my knowledge after using this version of asterisk. Without pressing any digits or key from my mobile, I am getting DTMF into my asterisk server. For getting DTMF I have use one opensourse application which gets events from asterisk server and store into database. And after that I made my own script to gets these DTMF keys and

We are using AAH with Asterisk 1.2.7.1 with a TE405P as listed below. We are getting frequent restarts on the spans which lead to dropped calls. I have pasted some hopefully pertinent information below -- anyone have any clues that might help? Thanks Next line is repeated throughout messages, going through every channel in every connected span. asterisk/full.1:Apr 24 01:15:25 VERBOSE[4196]

Hi all, I've done this a few times with other PBX's but swyx has stumped me! I'm having some trouble getting Asterisk connected to a Swyx system using a sangoma A104dx... currently the setup is: BT <-> Swyx The above setup works fine... what i'm trying to achieve is BT & SIP Trunks <-> Asterisk <-> Swyx I have connected to our BT (2 x ISDN30 UK) with

I know this topic came up many months back and some discussions were being had on how to do this within the Zaptel drivers. However, I'm looking for even a crude hack that someone has put together to get this done. We have PRI's and LD T1's that are load balanced on two boxes. The hunt order goes from box to box as far as the spans are concerned. There are times that I would like to

Hi, Lately we've noticed that some Zap channels on one of our PRIs are unavailable. We have 2 PRI lines with 60 channels in total. On the first PRI there are currently 20 channels that are not being used for some reason. I tried googling around and found some similar problems but there really was no solution (?). I'm not sure if this problem has occured now because of more load on the

Hello, I have following problem with Sangoma A104 card: CLI> pri show span 1 Primary D-channel: 16 Status: Provisioned, Down, Active Switchtype: EuroISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 NOTICE[16509]: chan_zap.c:7494 pri_dchannel: PRI

Hi! I have an Asterisk Box with one E1. This is connected with PSTN. My problem is that periodically the Asterisk console shows the following message. -- B-channel 0/1 succesfully restarted on span 1 -- B-channel 0/2 succesfully restarted on span 1 -- B-channel 0/3 succesfully restarted on span 1 -- B-channel 0/4 succesfully restarted on span 1 -- B-channel 0/5 succesfully restarted on span 1 --

I am trying to configure a channel bank with 24 ports of FXS., but appear to be hitting a roadblock? This worked on v1.4.xx but now just get "SimpleSwitch" and immediate=no/yes don't seem to make a difference?, no matter if under top section, under channel, etc. Chan_dahdi.conf: [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes

Hi there, Newbie questions on ZAP channel numbering (forgive me if this was asked before): 1. How are channels numbered if I have multiple FXS/FXO cards in the system? Is there a fixed mapping between PCI slot id and the number range allocated for all the ports on that PCI card? 2. Same question for T1/E1 spans. Appreciate your help! Yester

Hello all, One of our clients reported that they are experiencing echo in SIP calls (even on internal ones). What do you think could be causing echo in internal SIP calls? We're using Polycom telephones, do you think they could be causing it? Thanks, Alex

Hi All, Hope you all are fine and good, Today i have found that Mine all PRI Channels are restating after every interval of one hour, and i have search and psot on fourms and everyone said that this is a normal behaviour. If this is a normal behaviour is there is any way to stop it { i still don't know what is the reson to restart ever hour } . Because this is listed everywhere that

Evening, My latest asterisk box is having a difficult problem. It is configured with one TE210P and TDM400P with four FXO modules. I'm running FC6. The TE210P only has a single PRI. When the system boots, it is completely random what order the zaptel modules will get loaded in. Sometimes zttool shows the FXO as the last span, sometimes as the first. When it does load as the first, which

Hi murf, Speaking as someone who designs and builds billing platforms, this is very exciting. One little thing I have most problems with is the good old fax detection. I know that NVFaxDetect et al do actually answer the call and, therefore, get flagged as ANSWERED in the CDR. But, if the call never gets answered after the initial detection - then, to my customer, it is a missed (NO ANSWER)

Hello I am trying to configure TE420P but i am confused what to give chan_dahdi :( Below is configuration i am using for TDM400P Please help what changes to make in it... Please provide a link as well [trunkgroups] [channels] ;default for channels switchtype=national rxwink=300 hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes

I have a system with two 4 port T1 cards, with 5 PRI's configured. Each PRI is configured as an individual PRI and belongs to it's own group (groups 1-5) This system is handling roll-over from another system, where any error in processing the call on that system results in it being sent here. This mainly results in all calls resulting in a busy being sent for retry here. I then

Greetings folks- I'm experiencing issues with a freshly installed box. When a call comes in via PRI (Sangoma AFT-A104), I see this in my logs: [Dec 15 14:26:10] WARNING[23546] chan_dahdi.c: Unable to enable echo cancellation on channel 12 (Invalid argument) [Dec 15 14:26:10] WARNING[23546] chan_dahdi.c: Unable to enable echo cancellation on channel 8 (Invalid argument) [Dec 15 14:26:10]

Hello, I'm running wine on my Lenovo X60s under Ubuntu 7.04 I received a small program-executable made somehow with Matlab. A simple flow simulation model. Installation and executing the file with wine seems to be unproblematic first. However, there are some functions in the program where it crashes with the following message: Run-time error '429' ActiveX component can't create