similar to: Meetme + Sangoma issue?

I've been lurking on the list for quite a while now, and I hadn't seen much from people using FreeBSD, so I figured I'd post something. Yes, the driver in the ports tree for the digium card works! I'd heard reports that it crashes the box/etc, but I have yet to encounter that. I've had all the fun I can stand making it answer the phone, dial numbers/etc. The makefile for the

Any other FreeBSD users experiencing this particular problem? I have an X101P board plugged into a PC running 5.2.1 and using the latest (0.6) zaptel port right from the port tree. zttool shows a RED alarm on the card but the phone line appears to be okay (plugging an analog phone into the "Phone" port produces a dialtone on the phone). I've even tried switching the line polarity and

I have a TDM400P (configured with 4 FXO cards) in a box that was working fine from POTS lines extracted from a Lightspan via DSC's channel bank, but when I switched over to using an Adtran 616 (weird little box, takes an SHDSL circuit in that splits out 16 analog lines via an amp connector) the card no longer seems to be able to detect ringing. I've tried upping the rxgain with no

I have the following problem with outputting multilingual data to a file. I get (except for Korean) what I expect as result in the RGui, but when I use sink() to output to a text file loose the characters in the foreign languages. I post a small example below. Since I am not sure how well my email system as the list copes with all the different characters I have additionally created a pdf

Hello; I'm running a FreeBSD 4.10-release-p2 box and both chkrootkit 0.44 & 0.45 report that my /sbin/init file is infected. It appears as though the egrep for "UPX" in the output of "strings" triggers the infected notice. When I copy the init file from an uninfected box to this one chkrootkit continues to report it as infected. Is chkrootkit reading a copy of the

Hi all, i still have problem.. Some time I am able to install and other not. I tried this on different machine either in a pool and either in a single installation of XCP. These are the steps I use to create a VM: # set disk size xe template-param-set uuid=9d8c3be5-f16b-7446-b978-e23551d8a77e other-config:disks="<provision><disk device=\"0\"

hey list! i'm using "super flexible file synchronizers" (sffs) with windows for years and now try to find something similar on linux. rsync has quite the featureset that i like (still, i miss the graphical interactivity, and unison doesn't quite match it), but one feature is completely missing: detecting moved files. from sffs' feature description: "Detects Moved

CentOS 5.5 Xen "standard" Xen Installation. I have two nics. I just put the second one to DHCP and modified the ifcfg-et01 and so far I am holding, but I am not confident. Prior they were sequential IP Addrs on same subnet. arpwatch has indicated flip flips. I can find no rhyme or reason to predict them. I know I missed I must have missed a step somewhere. I want to keep the

Hi All, (please reply directly as I''m not on the mailing list ) I''m trying to setup a firewall for the below config but I''m not sure what set of rules or even how to go about it . Internal Subnet setup on Lab network with Sun Microsystems =========================================================== Firewall machine with Fedora and Webmin/Shorewall Installed

https://bugzilla.samba.org/show_bug.cgi?id=5482 Summary: apply the rsync comparison algorithm specially to .mov and .mp4 files Product: rsync Version: 3.0.2 Platform: All OS/Version: All Status: NEW Severity: enhancement Priority: P3 Component: core AssignedTo: wayned@samba.org

Hello, You may recall some of My Dmz question around Thanksgiving. While I have configured a Proxy arp Dmz. I would like to practice with the routed setup you suggested Tom as your network was simular. Here is one of your quotes "The configuration of eth2 is largely irrelevant but you certainly don''t want to confuse things by assigning any default gateway out of that

Hi all, I am getting some warnnings in Asterisk's logs. I am not familiar with this error, could anyone please tell me what is this error, is it danger..? Jan 4 17:58:35 WARNING[30665] channel.c: Avoided initial deadlock for '0x9106ef8', 10 retries! Jan 4 17:58:40 WARNING[5478] channel.c: Avoided initial deadlock for '0x9106ef8', 10 retries! Jan 4 17:58:41 WARNING[30665]

Hi, I swear I have read almost all the posted messages about this issue, but it's evident I couldn't find an answer (surely esay) to my problem. What I want is the following: Make 8 days aggregates from a daily series like this (dput output): structure(c(6.91777181625366, 0.79051125049591, 9.00625133514404, 9.86966037750244, 14.4326181411743, 3.70155477523804, 9.67768573760986,

I have a reproducible intermittent error large site - "The specified network name is no longer available". This happens when copying large files. Below is part of log level 10 output & strace. Sorry for the long posting. I will probably need to put the loglevel 10 attached to a bugzilla - but thought I would try the lists initially. RHEL4 samba-3.0.25b-1.el4_6.4

Hello, I am experiencing a strange problem when writing (capturing) DPX video files to a Linux/Samba share. Basically, I'm seeing seeing a single smbd process go from 9 percent CPU utilization to 100 percent CPU utilization over the course of about 40 minutes. When smbd reaches 100 percent, the capture stops (drops frames). I have tested this with three different filesystem formats

http://bugs.freedesktop.org/show_bug.cgi?id=15801 Summary: AOL video doesn't play Product: swfdec Version: git Platform: x86-64 (AMD64) URL: http://video.aol.com/video/comedy-funny-cat/2018555 OS/Version: Linux (All) Status: NEW Severity: enhancement Priority: medium Component: plugin

I am having trouble getting wine to work with my sound. When I use winecfg it can not autodetect the right settings, and it only opens a control device, no output device: Code: hammertime boxfire # lsof /dev/snd/* COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME winecfg.e 9086 boxfire 10u CHR 116,32 5684 /dev/snd/controlC1 explorer. 9108 boxfire 10u CHR 116,32 5684

Hi, When I start asterisk with asterisk -vvvvc it works preaty well, but I get the following warnings: Warning, flexibel rate not heavily tested! WARNING[1074494176]: File res_musiconhold.c, Line 462 (moh_register ): Unable to open pseudo channel for timing... Sound may be choppy. WARNING[1074494176]: File res_musiconhold.c, Line 462 (moh_register ): Unable to open pseudo channel for timing...

* Kevin Laurie <superinterstellar at gmail.com> 2015.01.27 03:24: > . search text dear > * OK Searched 9% of the mailbox, ETA 1:39 > * OK Searched 20% of the mailbox, ETA 1:18 > * OK Searched 29% of the mailbox, ETA 1:12 > * OK Searched 38% of the mailbox, ETA 1:03 > * OK Searched 50% of the mailbox, ETA 0:49 > * OK Searched 60% of the mailbox, ETA 0:39 > * OK

I have a local yum repository for CentOS4, and from time to time I add new (custom) kernel RPMS. However, when I run 'yum update' on an SMP box, yum 'installs' the new kernel, kernel-devel and kernel-smp packages, but 'updates' the kernel-smp-devel package. i.e. I end up with multiple versions of the kernel, kernel-devel and kernel-smp packages, but only the latest