similar to: GXP-2000 1.1.0.13 Issues

Hi, I'd set the daylight saving option to yes on all the GXP-2000 phones, but apparantly it doesn't move it an hour back on last sunday of October. So now I am stuck will all the phones showing the wrong time. Isn't there an option so that it'll automatically update daylight savings? Thanks -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was

Hi, i got my Grandstream GXP-2000 phone today and want to configure it with TFTP. I downloaded the firmware 1.1.0.13 and put it into my tftp-server directory. Then I downloaded the template from: http://www.grandstream.com/DOWNLOAD/Configuration_Tool/Linux_Unix/Grandstream_Configuration_File_Template_1.0.6.x.txt renamed it to cfg<mac-address> Did the configuration in the new file and

Hello, At a client site yesterday I installed a dozen GrandStream GXP-2000's with 1.1.0.13 firmware but I had to backtrack and reactivate the old PBX and phones: network access for users windoze PC's through the phone's switch port was unbearably slow, making it almost impossible to work. When plugging back PC's directly to the LAN speed was normal again. On my test setup

Greetings all Grandstream released a new firmware and it seems like the speaker phone problem has been fixed. However we updated to firmware 1.0.1.12<http://1.0.1.12>to fix the echo problem but found other problems were now created. The worst of these new problems is that the whole phone starts degrading, the volume starts getting lower and lower. The ringing starts fading and the calls

I'm using a few GXP-2000 with firmware 1.0.2.13 and everything seems to be working fine. However, there are a couple of issues I'd like to know if are possible: 1) Even though the phone has 4 line appearances, if I am speaking on a line, the phone can no longer receive phone calls. I can manually select another line and make calls, but when Asterisk tries to send a call to it, I

Hello I'm about to order a GrandStream GXP-2000 and a Linksys SPA-921 I'd like to have some user feedback about how those phones perform, and whether their LCD screen displays both the caller ID name and number (The GrandStream BT-100 only displays numbers, which isn't very helpful). Thank you.

Guys. I just downloaded the recent firmware for GS GXP 2000 and I must say the phone works great but... How do you make the conf button work?????? Anybody done that? Also, with great dissapointment I must ask, where is ILBC support? GS web page mentions it and the manual says it supports it almost using bolds :) soooooo where is it???? Any light on this?

Anyone used the new Grandstream GXP-21XX series phones. We have been testing these phones and like what we see. We are looking for a greater cross section of testing before we roll them to production. Any feed back would be appreciated. We are talking with Grandstream engineering and they are looking for feed back as well. Any input is appreciated. Thanks Bryant -------------- next part

FYI, spoke with Grandstream this morning, the GXP-2000 release has been delayed again. Looking like April now before these hit the street. -- Cory Andrews Senior Partner VOIPSupply.com +++++++++++++ V: 800.398.VOIP X22 F: 716.630.1548 E: Cory@VOIPSupply.com

Hi, Has somebody experiences with the Grandstream GXP2020 / 2000 phones in a business graded installation (with really traffic on .... not 3 calls a day ;-) ) Of course with Asterisk PBX (1.4.1 or 1.4.11 or 1.4 in generall) Thanks! Kind Regards, Erik

I've done some googling and searched voip-info but I'm not able to find a good answer about how to provision the GXP 2000. Based on questions I've asked before it seems like a lot of people are using the grandstream phones so I figure provisioning can't be that hard. Is everyone using the web interface for *every* phone? Or is there a better, more automatic, way? TIA!!! Thanks,

Hi folks, Just a quick question. Does the GrandStream GXP-2000 phone support presence (hints)? Cheers, Richard. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060109/26c4a63c/attachment.htm

I have upgraded the GXP-2000 to the newest firmware 1.0.1.12<http://1.0.1.12>and the phone is much more usable However, I still have two slight sound quality issues: 1) There is static on the line at all times. It is not that noticable to me, but when I make calls out the PSTN the person on the other end hears it. If I use a Cisco ATA with an analog phone and call the same person again

Hi People, We use the Grandstream GXP-2000 phones, firmware 1.1.1.14, Asterisk PBX, Slackware Linux 10.2, loaded on a Intel(R) Pentium(R) 4 CPU 2.66GHz Box... The issues that we are experiencing involves our Telephone Operator's/Receptionist whom answer multiple incoming calls... As an example.., when they answer line 1 and Line 2 starts to ring they would ask the person on line 1 to

Hi all Slightly OT but I know a lot of GS experts hang out here - I just upgraded a GXP-2000 to firmware 1.0.1.13 to try out the BLF functionality with Asterisk (which so far works as expected), but as a side-effect the phone won't sync with an NTP server - I've tried different server names (time.nist.gov and pool.ntp.org) and IPs in the config, but it refuses to update the time on

Is it possible to program the multi-purpose keys on a GXP-2000 remotely via a TFTP configuration file? If so, what are the parameters to put in the configuration file? Thanks, Daniel

Can someone explain me attended transfer with Grandstream GXP-2000? Hitting TRNF button, I get: Dial number (BLIND) or Select line (ATTENDED) What's the exact meaning of 'Select line'? Thanks Mimmus

Is anyone else having an issue with GXP-2000s and transmit gain? All my other phones are fine on my TDM400P with txgain set at 0, but the GXP-2000 caps at about a third of the scale in ztmonitor. I'm getting people complaining they can't hear me on my GXP-2000s, whereas my Snom 320 and Polycom 301 are great, and my Budgetones are overmodulating. Is there any conceivable fix on the

Hi, I have a lot of GXP-2000 phones not registering with Asterisk server. After two days of attempts, it seems that problem is due to the fact that phones and server are not on the sme network. Do you know if this is known issue? -- Domenico Viggiani

I have a client with 20 GXP-2000s. Everything seems to be working fine. However, after a couple of weeks of use, the client is having a hard time adjusting to the new IP based phone systems and only misses one feature from their old Lucent system. That is, they had 8 analog lines before and all their old Lucent phones showed a button for each line. So, it was easy for anyone to say,