similar to: US telco lingo

I went to put in the new sound files over the weekend, but forgot to backup the custom folder and lost my custom digital receptionist files. I then had to copy the old files back from a duplicate machine. The problem is now though that voicemail just hangs up when I dial it. Other apps work - *70 for example gives me 'call waiting...activated' so I know it's accessing the files

Hi, I just got a T1 interface for a AT&T (became Lucent) System75 (uses same cards as Definity). I would take a crack at making a cable but can't determine the pinout for a cable and it is not apparent from the board. Asking you guys makes sense as one of you may have one of these systems. The cable has a amphenol male D50 connector on one end and probably a rj45 on the other. I also

Hi all, I'm sure something similar has been discussed, but one can only wade through the archives for so long. I'm setting up a T1 and my telco has a bunch of questions it wants me to answer. I know much of the TE110p is configurable to do any of this, but I wanted to know if there is an optimal or preferred setup. Any help would be appreciated. Here is the quiz my telco is giving me:

Hello, I have an asterisk server running with 23 g.729 licenses. I have also purchased a sound file from thevoice.digium.com. I need to covert this file (uLaw, PCM I think) to g.711, g.729 & g.723 for use with an IVR system. Is there a way I can convert the files using the g.729 digium codec? sox? Thanks -Matt -- Matthew S. Crocker Vice President Crocker Communications,

Hello, I?m using virt-install to build a guest system with CentOS. The system boots up, times out with dracut-initqueue timeout and drops me into an emergency shell. If I exit the shell the install continues and I get a working machine. Any ideas? virt-install \ -n TEST \ -r 8192 \ --os-type=linux \ --disk=/vm-images/test.img,device=disk,bus=virtio,size=100,format=raw \

Hello, Again one more question about hardware. What could you suggest me to buy. I need hardware to connect let's say 4 analog lines. (FXO). This hardware should "talk" to Asterisk of course.. Thanks very much for some advices :) Bartek -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I have a Lucent MAX TNT, (DS-3, 672 modem ports, 28 PRIs). I'd like to be able to direct an inbound fax call into my TNT, have it answer the fax and send the image file over to Asterisk, or some other system to deliver to an e-mail address(s). I'm not sure if I need Asterisk to any of the call control or not. I'd also like to setup a print queue and have outbound

Greetings list, I've been asked to provide a system for 200 extensions, most of which will be existing analogue POTS handsets, not IP handsets. I've not really had any experience with large channel banks in the past (since most of our deployments are strictly IP-only to the desk), so I'm at a loss as to which ones are worth looking at. If anyone's had experience using channel

Does anyone have the NPA NXX list for North America in comma delimited file? Only looking for: NPA, NXX, City, State Just seems it should be available free somewhere? Then comes the next step, the setting callerid name based on the NPANXX to city, state -Mark -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.8.3 - Release Date:

Good Evening Does anyone in the R-help list have experience writing an R wrapper that interfaces with the commercial packages LINGO and/or LINDO.api from R? I have a set of nonlinear/mixed integer problems that solve nicely with LINGO but I would like to use R to set the problems up and analyze/plot the solutions dynamaically. I have searched the archives and have not found any R packages that

Hello, I'm trying to upgrade an Asterisk 1.2 linux box to Asterisk 1.4. I installed the following -rw-r--r-- 1 root root 10908541 Sep 21 13:25 asterisk-1.4.0- beta2.tar.gz -rw-r--r-- 1 root root 993921 Sep 21 13:25 asterisk-addons-1.4.0- beta1.tar.gz -rw-r--r-- 1 root root 80019 Sep 21 13:25 libpri-1.4.0-beta1.tar.gz -rw-r--r-- 1 root root 1523413 Sep 21 13:25

Hello, A long Google search didn't turn any clear answer. Does somebody use Asterisk in combination with Lingo? Thank you, Bas

Are there any switchvox/fonality type Asterisk based PBXs where I can buy just the software? I don't want to buy their 'bundles' that come with junky PC hardware. I just want their software/GUI to run on my hardware. Does Asterisk BE come with a GUI management console for managing phones, queues, VM and the like? -Matt -- Matthew S. Crocker Vice President Crocker

Hi, I've recently signed up to the lingo service. I wish to use their service as a trunk interface for asterisk directly(without an ATA). Lingo's support hasn't been very helpful and I couldn't find any info searching google and voip-info.org. Does anyone have any experience with it? Could you send me a working config? Thanks, David Lowes --------------

My TE411p does not seem to like to have two PRIs from different telcos (span 1 and span 2). I can get one working, but not the other. However, if I use vpmsupport=0 when loading the wct4xxp module, they both work. But here is the problem, vpmsupport=0 disables the on board echo cancellation. Any ideas? BTW, here is zaptel.conf span=1,1,0,esf,b8zs span=2,2,0,esf,b8zs bchan=1-23 dchan=24

Hi all, I just saw this article about this new offer from Lingo.com: http://www.techweb.com/wire/story/TWB20040607S0008 $20 monthly plan with unlimited local and long-distance calling in North America (US & Canada) and Western Europe. Plus first three months free and free equipment. It doesn't say what hardware they send you. Sounds like a very good deal. I searched the list and

Hei Im struggling with this problem: b) Another company wants to compose the optimal project portfolio based on the following 5- year project proposals. In the table, the cash flow for each project in each year is shown. Project 1 Project 2 Project 3 Project 4 Project 5 Project 6 1st year of the project -58 -32 -18 -31 -33 -39 2nd year of the project 17 17 11 4 21 30 3rd year of the project 26 30

I''ve been trying to match multiple public IPs in an ingress qdisc. The idea is to allow these specific IPs and aggregate value of 256 kbits incoming to the interface. Can anyone tell me how this can be effectively done if at all possible with tc? Thanks in advance -- Corey Rogers <jrog@sunbeach.net> _______________________________________________ LARTC mailing list /

Hi, guys. May be someone could give me advise? I am trying to find good VOIP provider ONLY for OUTGOING calls with low per channel cost and cheap rates on Eastern Europe, Turky and xUSSR. Should support g729 or g723 codecs, SIP or IAX connectivity. -- ========================================================================= = Best regards, Nikolay Pavlov.

Hi all, I'm learning the PTX backend and confused by the following problem. In the constructor of PTXFrameLowering, StackAlignment and LocalAreaOffset are assigned 2 and -2, respectively. Since PTX has neither stack frame nor stack pointer, why StackAlignment and LocalAreaOffset are needed and where does 2 and -2 come from? Any explanation is appreciated. Thank you in advance! Yours