similar to: cannot transfer to call waiting call on ip500

Hi All - I noticed that the Polycom IP501's are now shipping. Has anyone gotten one yet, and if so, what's different about the phone? Any UI improvements, or is it just better hardware? Thanks, Noah

Hi, I hope someone could help me, i have a x100p interface for testing purpose and on each incomming call I redirect the call to handytone 388 atas, the problem comes when i'm during a call and another call comes in, i hear the call waiting beep (comming from the zap channel), but I can't catch the call as usually using flash+2 (my pstn call wait sequence), because when i flash the

Hello, Is it possible to detect a hook flash in asterisk. I want to be able to perform some functions an hook flash. I have the following entry in features.conf which executes a Macro on detecting key press '**'. [applicationmap] test => **,caller,Macro,testflash Is it possible to do this action on hook flash? -------------- next part -------------- An HTML attachment was

Problem resolved. This makes it nice and simple to 'flash' an incoming POTS line (ZAP channel) as opposed to the dialplan scripts that I have seen that require tranferring the call, hanging up, and waiting for a call back. That was too confusing for my wife. Now all she has to do is pres *3 and it is done. No transfers. No hanging up. No dial back. extensions.conf [context] exten =>

Hello, I am looking at the Polycom phones. The ip600 has a very nice screen, is that the only real advantage over the ip500 and ip300.. Is it worth the extra dollars? Kind regards Michael Felder IT Medic Australia Pty. Ltd. P: 03 9557 2213 F: 03 9557 2214 M: 0419 568 217 E: Michael@ITMedic.com.au <blocked::mailto:Michael@ITMedic.com.au> http://www.ITMedic.com.au

This post is simply documenting a spouse-friendly way of using the spa-3000 as both a fxs and fxo port for basic soho environments in the US, allowing asterisk to participate as needed/wanted. All home phones are connected _only_ to the spa-3000 fxs port. The incoming home pstn line is connected _only_ to the spa-3000 fxo port. Defined Line 1 (fxs) to register with asterisk via sip (extn

When I bought two Polycom 501 SIP phones, I naively thought they were Power-over-Ethernet (IEEE 802.3af) because they were "powered over ethernet." Silly me. Polycom must have some odd voltage or funny way of injecting the power, because the POE switch I bought for them (Netgear F@510P) won't power them, though if I use the Polycom-supplied AC adapter and ethernet power

Hi everyone, our setup includes a NEC PBX connected to our asterisk via bri lines. The NEC has a doorphone feature, which is just an extension that calls you when someone rings. When connected to this extensions, a 'flash' signalling opens the door. So now, i'd like to trigger this from asterisk, too, but unfortunately wasn't able to do so. Setup: asterisk

Has anyone been able to get the IP501 to discover the FTP server IP address (via dhcp or dns) and download 100% of the config from a provisioning server? We are still having to touch each unit to enter the ftp server address and password, as well as set many of the options that will not take from the config file. Have a sample config file you are willing to share? What is required in

Hello, Does anybody have the latest Boot ROMs for the IP500 and IP 600 Polycom phones. I have one of each and can't find the Boot ROM v 3 anywhere to download. I would also love a good sample phone.cfg and sip.cfg files from an Aussie asterisk user to look at. Also the ip500 is having problems trying to load the bootrom 2.6.2 ? Any ideas? Kind regards Michael Felder IT Medic

Hi, I just got and setup a new ip500 yesterday and it worked for about 15 minutes. Then it froze during a reboot.Now, when power cycled, the logo comes on for 3 seconds and then the screen is blank and nothing further happens. 468* factory reset doesn't work. I am about to send the phone back, but wonderd if anyone had a suggestion first.

I've had an IP300 for a while now and it's been working fine. I just got an IP500 and when it connects to the FTP server it downloads the new bootrom and says error loading. The bootrom is fine and works on the 300... In addition, I downloaded a new copy to be sure and it still doesn't work. Can anyone give me some advice?

I've been looking at Asterisk for a while now, and want to set up a small installation at my house. I did originally want to get a Cisco IP phone, but due to price and it not being easy to obtain the SIP firmware I have decided again them. I am very interested in the Polycom IP500. I can find many places in the USA that sell it but nowhere in the UK. Also can anyone recommend some good

Hi I am just getting started with asterisk and trying out using the sample files with a Polycom IP500 (latest sip.ld etc) My question: phone status says not registered: /system status/server status "Line 1 poly is not registered" console message says: handle_request: Registration from '<sip:poly@10.1.20.3>' failed for '10.1.20.50' I have tried dialing and

Greetings, I'm wondering if it's possible to display line breaks with caller ID display. I have the Polycom ip500 phone, and what I am trying to accomplish is instead of the phone saying 'Incoming call from: name/number' i want it to appear on the phone like this Incoming Call from: Menu Context last in Name Number I tried using \n and \\n between the variables (${VAR} \\n

Did you try to boot without lan just the power ... I've had this same problem to and rebooted the device without lan connection -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Louis-David Mitterrand Sent: woensdag 26 januari 2005 11:36 To: 'Asterisk Users Mailing List - Non-Commercial Discussion'

tuning for ulaw g.711 - Polycom IP500 I've got QoS ironed out at this point (dedicated section of bandwidth with VoIP having priority), yet ulaw is still unusable due to small 'holes' in the audio. Running iperf tests shows packet loss at very low percentages (< 0.02 %), and when we do drop, it's only 1 packet at a time. I thought ulaw was supposed to handle this OK.

Does anyone have any sample configuration files for the Polycom IP500 phones that have been cleaned from the samples that come with the 1.5.2 firmware. I'm wondering how much is necessary, and how much will just work by default. I am really only setting the line authentication , and sntp/timezone-offset for each phone, and everything else is just left as default. Can I just pull unchanged

Hi, Im having problems getting a polycom IP500 phone to register. Ive edited the xml files and appropriate .cfg files and it shows up registered with no ip address and if I go into the phones status menu and pick lines it says its not registered. If I tell it to upload the log file it doesn't say anything about why its not registering / what errors its getting. Any advice is appreciated.

I just noticed something when I 'sip show peers' from the CLI, I get the following: 6113/6113 x.x.x.x D N 255.255.255.255 62927 OK (66 ms) 6112/6112 x.x.x.x D N 255.255.255.255 50079 OK (160 ms) 6111/6111 x.x.x.x D N 255.255.255.255 60810 OK (141 ms) 6109/6109 x.x.x.x D N 255.255.255.255 51331 OK (151 ms) All of those