similar to: 56K Dialup and VOIP over same PRIs

Hi, I've ran into an issue with a PRI provider in a major metropolitan area that I haven't needed to deal with before and I was hoping someone might have some insight on how to handle this within the Asterisk dialplan. At this location users can't always tell if a number is long distance or not (there are a lot of area codes and prefixes in the vicinity). Additionally, users are

I'm looking at switching VOIP providers, but want to ensure I move to a company with sufficient capacity. Can any Canadian VOIP users post/email me with feedback on their providers? I'll post the results for all to read...... -------------- next part -------------- An HTML attachment was scrubbed... URL:

My TE411p does not seem to like to have two PRIs from different telcos (span 1 and span 2). I can get one working, but not the other. However, if I use vpmsupport=0 when loading the wct4xxp module, they both work. But here is the problem, vpmsupport=0 disables the on board echo cancellation. Any ideas? BTW, here is zaptel.conf span=1,1,0,esf,b8zs span=2,2,0,esf,b8zs bchan=1-23 dchan=24

Hi, I'm trying to bring up two PRIs from qwest with asterisk and dahdi. I'm using an OpenVox D410E and the drivers are loaded. My system.conf looks like this: # Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" B8ZS/ESF RED span=1,2,0,esf,b8zs bchan=1-24 # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" (MASTER) B8ZS/ESF RED span=2,1,0,esf,b8zs bchan=25-47 dchan=48 These

Hello! In my relentless quest for knowledge, I pose this question: who's got the biggest dialplans, and how big are these monsters? What's the biggest dialplan in use right now? If you feel you are a competitor, let me know how many contexts/extensions/priorities you are dealing with. Maybe the context with the most extensions, the extension with the most priorities would be

Has anyone figured out a way to instantaneously swing over PRIs bearing calls in progress to another media gateway without dropping them? Obviously, this would require a DACS of some sort. But I am thinking that it is possible to swing T1s over in a DACS without actually causing the endpoint to reframe as long as the other endpoint is kept in sync. So, it'd be nice, for example, to bring

Hi, I'm looking for some advice on how to solve DTMF issues. I have 2 boxes, one which is the connection to the PSTN (PSTN) through PRIs and SIP trunks, and a second (PBX) which has UAs registered to it. We have a customer that has an existing pbx that we trunk analog lines to using a GXW-4008. The GXW is set to dtmfmode inband. This seems to provide the best outbound DTMF. The issue I'm

I currently have a single PRI however we are getting a second PRI, and the provider (qwest) wants to know if our PBX supports GSAS (they say its a redundant d-channel technology but searching on google for GSAS reveals less than nothing). I've set something similar up before on a cisco 5350, where if one of the PRIs fails, all of the calls destined for either PRI will be routed down the one

Hello, I've found a little documentation on voip-info and on the asterisk- users list, although I was hoping for an example of a tried-and-true failover setup between PRI and SIP. We are an outgoing call center that uses asterisk 1.4 connected to 2 PRIs from the local telephone company in one group (g1) and a SIP trunk from bandwidth.com. The PRIs are the primary outgoing service,

With multiple inbound PRIs (and hunting across them) coming to multiple [asterisk] servers it is important to be able to do administration, i.e. control which PRIs in the same hunt group take (and which don't take) calls from telco at any given period of time. Our pre-asterisk platform uses SERVICE commands for this purpose to put B-channels into 'out-of-service'/'maintenance'

I've got a system I'm putting together to handle IVR calls with * I have one head system that terminates two PRIs. It routes the calls from the PRIs to * boxes using IAX I'm planning on having four or five * boxes. The * boxes run AGI scripts to process the IVR calls. Can I load balance the routing if I have five calls each of the IVR * boxes gets two call and the next call would go

Hello, I have a Lucent MAX TNT, (DS-3, 672 modem ports, 28 PRIs). I'd like to be able to direct an inbound fax call into my TNT, have it answer the fax and send the image file over to Asterisk, or some other system to deliver to an e-mail address(s). I'm not sure if I need Asterisk to any of the call control or not. I'd also like to setup a print queue and have outbound

hI, Trying to understand how to setup two PRIs in sip.conf. Using Asterisk 1.4.23. I have a provider giving me two PRI (different rate centers) through SIP. Both PRI comes in from the same IP on the provider side, but go to two different IPs (both on the same box) on my side. How can I setup two different SIP peer, one for each of the PRIs I get, if all I can use to differenciate them

I am currently working on an Asterisk test system, and will be presenting a demo to the Board of Directors tomorrow night. I want to make sure I have all of my ducks in a row. The Asterisk system will be used to replace a Norstar MICS. The location has two PRI's coming in, with a few hundred DIDs. I know how to make * use the DIDs incoming, and I know how Nortel uses the DIDs. Now for the

Does anyone have any recommendations on how to connect 160 analogue phones to an asterisk PBX? Background information: A client wishes to replace their current PBX with a new VoIP system. Currently they have 2 PRIs. I intent to set up 2 asterisk PBXs with Debian GNU/Linux on raided drives. These drives will be mounted only read-only to recover gracefully from power-cycles. I am considering 2

We would like to present a toll free CallerID when making outbound toll calls. In the past, when our PRIs were directly connected to a Nortel CS1000 we could do this, without issue. Now that the PRIs are front ended by a mediagateway facing asterisk, we can no longer do this. Is it possible to set the billing number via a SIP header and set what should be presented as callerid as another header

I've got a couple of PRIs. When I call out on them from internal SIP phones, I will get ringing if the dialed number is ringing, but if the dialed number is busy I'll get dead air. Can anyone suggest ways to trouble shoot this? Don't seem to having any other problems with the PRIs. Thanks, David Ruggles CCNA MCSE (NT) CNA A+ Network Engineer Safe Data, Inc. (910) 285-7200 david at

I'm having trouble setting the outbound caller ID on calls I make from my PRI trunk group. The PRIs are served out of a 5ESS. Telco has set the PRIs up for user provided caller id information, so I believe I just don't have it set up right in my dialplan or something. I can't seem to find an example of setting the outbound caller ID specifically for a 5ESS. Does anyone have an

Hello, I have a crossover PRI(Asterisk server to PBX) and a regular telco PRI T1 line and currently have echocancel=yes and echocancelwhenbridged=yes on those spans in zapata.conf. I was discussing CPU load with another Asterisk user and he mentioned that PRIs don't need echo cancelation and that turning it off will reduced CPU load on the server. I checked many sample configs and the

Hey all, I have an as5300 I use for dial in customers, we have 4 PRIs on it. We have a few free channels on it. I'm wondering if I setup SIP on the as5300 I can have asterisk use the free channels for dial out. I'd still have to use my TDM04B for incoming calls, but at least I can expand my outgoing. Anyone done anything like this before? I've never messed with VoIP on Cisco