similar to: Dial out on Zap: Can't fix up channel from 31 to 30 because 30 is already in use??

I'm not sure if it's the same problem but your error message likely the same. after i additing pridialplan=local in the zapata.conf i'm able to make outboundcalls (located in germany) marcus -----Urspr?ngliche Nachricht----- Von: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Gesendet: Dienstag, 11. April 2006 16:33 An:

Hi, I was using Asterisk with Hylafax via IAX Modem. It works fine until I upgraded to Asterisk 1.2.7.1 I didn't change any configuration but it seems that Asterisk does not get the call from IAXModem anymore. I'm doing something like this Asterisk <--> IAXModem <--> Hylafax Usually when I use sendfax -n -d 260XXX somefile I'll see Asterisk receiving the call in

>recieve fax successfully. Today I tried to change to SpanDSP 0.0.3 pre 6 >but I just couldn't complie the app_rxfax and txfax application. The >SpanDSP 0.0.3 was successfully complied though. .3 is for developers only it is not intended for enduser use.

HI all, My asterisk for all my users, everything was fine for 3 days, but now i can't access it. But it is running... Could any one help me on this? Best regards, Marco Mouta

Hi All, I'm trying to add this function to my find-me application: when all available numbers are dialed in parallel , if any number is busy, take it at busy and go to voice mail. I read the Dial() Application but there's nothing written about this. My question is, is it possible to do this with Asterisk? Thank you, Pim

Hi all, I want to be able to see the status of my Agents on a web interface. I have no idea how to do so. I have found a few sample script to communicate with queues manager to view queues.But I couldn't find any on viewing the agent status. Could anybody give me a clue? Regards, Pim

Hi all, I an using MeetMe and I would like to use the -i function to annouce the join/leave of the user. However, this require that users record their names. Is there anyway to remove this? I just want MeetMe to annouce somethig like "A new user has joined the conference" and that need not to record user's name. Is there a way to do this?? Pim

hi all, is there a kind of application can let asterisk call out fellows, and invite them to come to join the meetme. these fellows do not need to call in asterisk , just wait for a call. 3x welemon

Hi, I'm using Cepstral as a TTS Engine for Asterisk with Swift application. It works fine when I have just 1 voice installed. Now I have 2 voices in the same language installed but I can't seem to find the way to select which voice to use in Swift's application in Asterisk. Does anyone know?? Thank you, Pim

System have been working great for weeks, using an average 40 of 120 dahdi channels. But today, I suddenly see scary things like this: -- Moving call from channel 5 to channel 7 [Feb 25 10:18:12] WARNING[17129]: chan_dahdi.c:10608 pri_fixup_principle: Can't fix up channel from 5 to 7 because 7 is already in use [Feb 25 10:18:12] WARNING[17129]: chan_dahdi.c:11535 pri_dchannel: Ringing

Hi, I'm trying to test my dial out function so I did something like this in extensions.conf exten => 999,1,Dial(Zap/g1/02601591) exten => 999,102,Congestion() My Zapata.conf looks something like this [channels] context=from-pstn group=0 switchtype=euroisdn overlapdial=yes faxdetect=no ; PRI port 1 (E1) ; context=1 group=1 signalling=pri_cpe channel=>1-15,17-31 I am able to

Hi, i was able to fix this problem when i added the line pridialplan=local in the zapata.conf but it depends on your telco, i think. marcus -----Urspr?ngliche Nachricht----- Von: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Gesendet: Donnerstag, 6. April 2006 11:50 An: asterisk-users@lists.digium.com Betreff: [Asterisk-Users] Dial out on Zap Hi,

Hi, All Is there a provision for "AbsoluteTimeout" application to notify called and calling party of the reason why the call suddenly ended? This way, the parties will be much better informed, hence they will/should not think that their VOIP/telco provider(s) are providing bad service. Ta SJ

I was playing around with conferencing tonight. I was able to place a bunch of SIP phones and a couple of my Zap FXS phones into a conference. So I thought, "Let's see what it's like when people come in from outside." So I called a friend and had him call in on one of my Zap channels, WHICH IS CONNECTED TO MY POTS LINE THAT DOESN'T DO DISCONNECT SUPERVISION. When he

Hi I am trying to develop a night divert. Caller dials in after hours on Zap and it gets divert to a mobile number via a second Zap. The call bridges but will not hangup the channels when the parties finish. Is there something I am missing or an dial option that I should be using. I am using latest CVS. [night] exten => s,1,Answer exten => s,2,Wait,1 exten =>

Hello All I am trying to answer incoming SIP calls, first, by dialing an extension, thence into voicemail, which works; and secondly by going straight into voice mail which does not. The extension.conf that works is like this; [incomingSIP] exten=>_.,1,Dial,Zap/2|1 exten=>_.,2,Voicemail,u5152 exten=>_.,3,Hangup the extension.conf which does not is like this; [incomingSIP]

Hi all, Is it just me and not reading the docs right, or has anybody else had problems with the AbsoluteTimeout application and the 'T' extension when used inside a macro? [macro-attended] ; ARG1 is the device to dial out on, SIP or Zap, or whatever ; ARG2 is the extension to dial using 'attended' dialing exten => s,1,AbsoluteTimeout(30) exten =>

Hi All, I've been having a hard time getting the AbsoluteTimeout function to work. Is this Function working in for SIP? I've search all the messages in the news letters and tried what was suggested and still have not gotten it to work. Below is a portion of my extensions.conf. I've also been running these test on ver 0.5.0 exten => _X.,1,Absolutetimeout(20) exten =>

Hi, Have a problem in my extension.conf: I have: [sip] exten => _333.,1,wait,3 exten => _333.,2,Answer exten => _333.,3,AbsoluteTimeout,7 exten => _333.,4,Hangup I wanted to test if * is executing this dial plan by calling 3335254255 for example. The problem is as follow: It waits, it answers but it does not seems to see the Absolutetimeout: call goes forever. What's wrong? Am

Greetings, I am running Asterisk with a T100P and a Zhone channel bank for over a month now. For the most part it works fine but from time to time (about once a week) the system will not let go of a line and will play the greeting over and over. Anyone calling gets a busy signal. If I reset Asterisk everything works fine. Has anyone seen this problem before and fixed it? If so what did you do?