similar to: Fax over 2 bridged TE110P channels

I successfully installed Xen 2.0.4 from source on a Slackware 10 system. I installed grub, got that working and all. But when I boot the dom0 kernel, I get: cmd 0x5a timed out hdc: lost interrupt My hdc is my dvd burner... when I applied a kernel option of "hdc=ide-scsi" it seemed to have skipped over it but recieved the same error on hdd ... I''ve tried recompiling with

Hello I just installed a TE110P in a Dell Poweredge 750 (rackmount), which is connected via crossover T1 cable to a adit 600. Anyway, I've encountered an array of errors, which I believe I have narrowed down to the 22 IRQ misses I encounter on zttool. I've noticed that the te110p and the usb device share an IRQ. Could that be the source of my woes? Would disabling the usb device in the

PC: HP Vetra VL400 Mainbood: Intel815 BIOS: Phonix 4.0 release 6.0 OS: REDHAT 9.0 I installed the X100P in PCI slot 2 and disable the USB port, serial-port and parallel-port in BIOS. I can't found the X100P card in " cat interrupts" But I can found the card in the "cat ioports" use "lspci" I found the X100Pcard use the interrupts 11 too. Who can help me to solve

Hello all, I have some questions about the libpri and zap lib. I've sent mail to Mark for help. Also I wonder whether anyone else would be interested and helpful in them. I'm going to migrate a program to Wildcard E400P card. Our original program is based on C API similar to the functions provided in libpri.h and zap.h, so I want to use the E400P card in the following way: 1. install and

Hi All, I hope I'm posting this to the appriopriate list, and that cross posting to two lists is OK. (If not, I'm sure I'll hear about it quickly :)) I'm running Asterisk on my (new) VIA EPIA-V motherboard. This seems to be the ideal platform for a home version of asterisk - its small, quiet, low power, and should have plenty of computing horsepower if only it would work!

Hello After having installed my X100P, /proc/pci and /proc/interrupts dosent locate them. In my PCI list is it the Communication controller: Tiger Jet Network Inc ? then is dosent have a IRQ listed in /proc/pci.. All help appreciated Thanks and Regards Ajit ===========================/proc/pci================================== PCI devices found: Bus 0, device 0, function 0: Host

Excuse my ignorance here, but I am desperately trying to isolate the IRQ for my TE110P card (shown below as t1xxp) Ive gone into my bios and disabled all usb , parallel, serial and some other devices, those that I needed to keep, I have moved off of IRQ 10 and onto IRQ 5, but everytime I boot up, I get usb-uhci and ehci_hcd using IRQ 10 as well as my Digium card. Does anybody know what these are

I have a pair of sites tied together with a T1 line running zaptel PPP on either end. The system works, but I keep getting these messages in the kernel logs, and users are reporting connection problems (TCP timeouts, and hangs) especially under high usage. --snip-- HDLC Receiver overrun on channel WCT1/0/1 (master=WCT1/0/1) HDLC Receiver overrun on channel WCT1/0/1 (master=WCT1/0/1) HDLC

Hello, I have a PC Chips A31G board with AGPro slot and found that nouveau does not work properly with it. Console works but reverts to software mode, X11 hangs with mouse cursor only. The slot is physically AGP 1.5V but is wired to PCI bus as the chipset (SiS 761) does not support AGP cards. To further complicate things, the chipset has AGP capability - but only for the integrated video. You can

I have seen this posted around the list a few times, but have never found my exact error or even a solution to this. I was getting this error every few seconds...... After moving the card to a different PCI slot and turning off some devices that are not needed. I was able to get the messages down to about every 10 minutes and the T1 card now is sitting in it's own intterupt. Apr 25 23:49:15

Hi all, inside my * is a E400P. The machine is a PII 400Mhz with 256MB Ram. OS is Debian woody. * is the newest cvs co. I have written a little callgen script which make outgoing calls through my *: #! /bin/sh set -e n=$1 # Nummer anz=$2 # Anzhal der Versuche anz2=$3 # Kan?le sle=$4 # Timeout bis zum n?chsten Versuch if [ -z $4 ]; then sle=0 fi s=1

Hello all, i'm experiencing a list of unpredictables hangup on SIP phones using a PRI E100P Card. All i can see in logs is " WARNING[81931]: File chan_zap.c, Line 5402 (zt_pri_error): PRI: Read on 37 failed: Unknown error 500" I receive a lot of these errors in asterisk/messages. It doesn't seem to be strictly linked to hangups, since i have dozen of these messages per

Still trying to get it running. Updated CentOS 7, ATI video card, trying to use the radeon driver, and, using the previous kernel, X appears to come up, but gdm fails; with the 514 kernel, X fails to start. And here's a twist: I just rebooted, with radeon.modeset=1 on the kernel line... and for no reason I know of, I get *six* logs, Xorg.[0-5].log. Does this suggest anything to anyone? I

Due to some failed hardware on another platform, I've had to move a T100P card to a different chassis. After this move was completed, I am seeing some strange results on the T100P card that do not display to me any failure mode with which I am familiar. The card comes up, and shows "good" carrier and status, but Asterisk refuses to bring the D-channel up. Calls of course do

My PRI is being reset at least once a day with the following errors in the logs. zaptel, zapata, libpri, and asterisk are from CVS this morning.. This has been happening for weeks on all versions (including -stable). the T100P card appears to NOT be sharing an IRQ. xenon# cat /proc/interupts CPU0 0: 1203977 XT-PIC timer 1: 3 XT-PIC keyboard 2:

Is there anything I can do in this regard? /smo On 2016-03-31 23:12, Pierre Moreau wrote: > Oh, hum, GM108 is NV118 and not NV108 which is Gk208… My bad! > > SMF from the bug report seemed to have some working setup, and since he didn't > pinged back, I guess it's working nicely. But some more checking might still be > needed? > > On 04:59 PM - Mar 31 2016, Ilia

CentOS 4.3 (fully updated, including CentOS Plus kernel). Running KDE 3.5.2 (fully updated from redhat.kde repo). I can't seem to get the OS to recognize my SD card when inserted into my USB card reader. Mepis 6 Beta 3 has no problem with it. DMESG sees nothing happening when the card is inserted. USB-STORAGE module is loaded.

When I use my phone to make VOIP call and another calls comes from POTS my phone rings to POTS caller. Why? Shouldn't it generate busy signal! -- #Joseph

Hi, The following 4 patches enable direct device assignment (PCI passthru) for HVM guest on AMD IOMMU platforms. Please apply them against C/S 16491 as the named order. To enable AMD IOMMU, please add "enable_amd_iommu" as xen boot parameter. 1-cleanup.patch: code cleanup, bug fix, minor enhancements to existing amd-iommu codes. 2-passthru-amd.patch: passthru support, modifications to

Has anyone had successfully installed more then two digium wildcards in the same machine? I'm going for four. thanks Shoval Tomer, IT Manager, SofTov Advanced Systems, Ltd. Office: +972-3-9230686 ext. 179 Fax: +972-3-9216642 Mobile: +972-54-8000200