similar to: WiFi phones and WDS (Wireless Distribution System)

Hi everybody, First of all, let me say that I searched a lot on the internet. I spent several hours sitting after my notebook, but I can't configure my network bridge in Ubuntu. I'm really desperate, so I hope somebody can point me out what I'm doing Hardware: ----------------------------------------------------------- $ lspci | grep controller 06:05.0 Network controller: Intel

I am testing BDD 2007 and WDS on a Windows 2003 Server. I have a PXE Server with tftpd32 and pxelinux boot. Is it possible to have a menu entry that chain the first pxe booting(pxelinux) to the WDS Server which is on a different computer because I can't install WDS on the TFTP pxelinux. I have testing this entry: LABEL TEST WDS kernel ipadress::pxeboot.0 but the first server always respond

Hello, We are trying to set up a configuration with pxelinux on a linux machine and WDS, allowing us to be free to boot linux netboot installers from the tftp server. We have validated that pointing our dhcp server to the wds server works perfectly. Our idea was to use pxechain.com to launch the wdsnbp.com kernel as below : label windows KERNEL pxechain.com APPEND <ip

Dear All, First posting here... I am trying to integrate a PXELinux boot into my native-mode WDS server. I have found that making WDS boot the PXELinux is easy (see below), it is making PXELinux give control back to WDS that I have not cracked yet. -In your WDS server, copy the contents of your tftpboot folder to the Boot\x86 folder in your RemoteInstall one. -Open the Windows Deployment

Hey guys, We are going with WDS to fire up first to get the benefits of targeted M$ deployments. If you have the "handle unknown computers" off on your M$ Distribution point, then you can still use regular WDS which runs next as a PXE filter (DLL linked into WDS) to fire off anything you want to including PXELinux. The stuff I was talking about before with PXELinux not working in

Thanks for your email. Yes it does provide some insight into why I could hack a Linux DHCP server into providing enough PXE boot information for PXE 3 clients but PXE 2.1 were happy (ROMs under many circumstances need to use proxy dhcp 4011 - as documented by IBM on the link I shared earlier). It appears only the most latest Dell business systems have EFI 64 support, and the best you can expect

On Dec 25, 2014 2:11 AM, "Luke Ledgerd" <luke.ledgerd at niteco.se> wrote: > > Hey guys, > > We are going with WDS to fire up first to get the benefits of targeted M$ deployments. If you have the "handle unknown computers" off on your M$ Distribution point, then you can still use regular WDS which runs next as a PXE filter (DLL linked into WDS) to fire off

The latest batch of computers that are being purchased by our organisation appear to be UEFI-only. Our WDS installation can network boot such devices, but goes straight into WDS rather than letting us have our SYSLINUX menu. Is there a way to set up SYSLINUX for use with WDS in EFI mode? Can it chain into WDS proper as one of the menu items like the legacy BIOS version can? If so, please could

After about 15 hours, a packet sniffer and a ton of google searching later, I have a solution to getting WDS (Windows Deployment Services) to work with PXELINUX Google didn't turn up anything of use directly, everything that was referenced appeared to be related to starting pxelinux from either WDS or RIS. That just won't do, since they often can give hiccups and lockups when

Hi, I'm working on a Wifi VoIP project specification. It will have almost 8 APs and 20-30 wifi phones. And after some research, I still having some questions ... 1) Are Managed Access Points (and switch controllers) really important to implement good wifi woip (w/ low latency and acceptable handover time) ? 2) What is the difference between (3com WX1200 + 3com AP 3750) and (DES-1228P +

Hi all, Finally, I have installed openvswitch from source to two CentOS hosts: one 6.x and other 7.x. I will do some tests using openvswitch bridges to my KVM machines. One of these tests is to add a wlan0 adapter from comandline but only when this wlan0 is associated with a ssid without assign an IP. Is this posible? Do I nees to add some ebtables like, for example, Debian's wiki

> Date: Thu, 25 Dec 2014 07:07:52 +0000 > From: Luke Ledgerd <luke.ledgerd at niteco.se> > To: "syslinux at zytor.com" <syslinux at zytor.com> > Subject: [syslinux] Chain-loading from WDS to PXELinux on a different > tftp server > Message-ID: <17ba7ad419d54b6cab685c2cedc3de95 at NI-MAILEX.niteco.se> > Content-Type: text/plain;

Spike White, Sent: Saturday, December 27, 2014 4:32 AM > > Luke, I have considerable experience with this. We use WDS at work > for PXE (MS-centric shop). I use pxelinux at home. > > I've got WDS working in our test lab w/ UEFI. As you state, it strongly > wishes to do proxyDHCP (port 4011). More on this in a bit. > > It's quite common to segregate the DHCP

I am trying to figure out a way to have a menu item in PXELINUX hand off control to WDS(Windows Deployment services 2008R2). Is this something that can be done with PXELINUX? So what I would like is a way to have PXELINUX and WDS work on the same network with PXELINUX being the main and booting WDS from a menu option in the pxelinux.cfg file. Any help would be appreciated. Thanks

Hi List, Hope everyone is recovering from the festive season :) (ok we still have new years i guess!) Anyways, I was wondering if anyone has had any successful dealings with WiFi phones and operation with '*' at all? I've been keeping my eye on the LinkSys WIP330 ( http://preview.tinyurl.com/nccxn ) and wondered your collective thoughts? Would I be correct in thinking that (as

I'm trying to bridge a wired network and a wireless network, but I'm having some trouble. No traffic seems to be passing through the bridge. When I issue a "showmacs" command to brctl, I am able to see MAC addresses from both networks. I am also able to ping both networks from the bridge machine. When I issue a "showstp" command to brctl, the wireless access

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 5675 bytes Desc: Clear Day Bkgrd.jpg Url : http://lists.linux-foundation.org/pipermail/bridge/attachments/20060515/b39aa4d5/attachment.jpeg

Have decided to give up on the embedded Broadcom 4312 wireless device in my son's Dell laptop. I get WEP open authentication to work, but nothing else. I was about to dump the bcm43xx kernel module and the bcm43xx-microcode5.fw firmware and work with the newer b43 module and associated firmware. However, he claims that at school, he has always had intermittent problems with wireless under

>> DHCP seems to be working properly - returning the correct boot file >>> for the architecture of the PXE client, but when I try to boot >>> syslinux.efi, it gets the file then keeps requesting ldinux.e64 over >>> and over again. The file is there and available. A wireshark trace >>> shows it keeps requesting the file, followed by the server

I see that ABPTech are now offering this SIP Wifi phone. Does anyone have an experience with it? I've considered the Pulver/Zyxel wifi phone but would really rather have something that can handle WEP or WPA. I run an 802.11g wlan with 256 bit WPA encryption. This Hitachi phone looks very much like a cell phone, which could be ideal. Michael -- Michael Graves