similar to: Calls forwarding to numbers only in user's context

Hello, I want to enable call forwarding for asterisk 1.6.0.6 I couldnt seen any config or option on gui or extensions.conf about it. I found some dialing plans to enable it on web as follows: [apps] ; Unconditional Call Forward exten => _*21*X.,1,DBput(CFIM/${CALLERIDNUM}=${EXTEN:4}) exten => _*21*X.,2,Hangup exten => #21#,1,DBdel(CFIM/${CALLERIDNUM}) exten => #21#,2,Hangup ;

Hei! I have a little problem with the subject. I use Asterisk CVS-HEAD-09/06/04-12:42:56 as a production *, but I do tests with a newer version Asterisk CVS-HEAD-11/18/04-10:01:32. Ok the problem is: in extension.conf I use macro for redirection, found on wiki pages: [macro-stdexten] ; ; Standard extension macro (with call forwarding): ; ${ARG1} - Extension(we could have used ${MACRO_EXTEN}

I set up a call forwarding script in extensions.conf which uses the AstDB but I'm wondering if I reboot the server, will the entry in AstDB still reside? What the script does is when a call comes in, it check to see if there is a null value or a call forward number. If null, it will call the local office connections. If there is a number, it calls that. Now I just need to know if I reboot

Hi!, I'm trying to set up a Queue (which works fine now :-) Sip clients can login in to the Queue with dialing 91 on there phone. And as soon as there are customers the Queue calls the agents back. I would like that the queue calls the agents also if it's phone is call-forwarded. With agents (sip clients) are added with the following extensions: exten => 91,1,AddQueueMember(myqueue)

Hi, I have following one-line macro extension: ------------------------ [macro-oneline] ; ; Standard extension macro (with call forwarding): ; ${ARG1} - Device(s) to ring ; #exten => s,1,AGI(misterhouse.agi,"CallerID") exten => s,1,NoOp exten => s,2,DBget(temp=CFIM/${MACRO_EXTEN}) ; Get CFIM key, if not existing, goto 103 exten => s,3,Dial(Local/${temp}@default/n) ;

Same here, I just changed the b to u. Unavailable message is more generic, but it beats it saying busy when its not. -Tim -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Henry Devito Sent: Tuesday, October 05, 2004 8:31 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE:

Hi, I have attached configuration settings and cannot get ring signal when calling internal extensions. I'm probably doing something wrong so would kindly ask for a tip how to do it properly : exten => 11,1,Macro(oneline,SIP/11) Calling 11 (this is the same with BT or iax softphones) doesn't give me a ring - what is missing ? Thanks, Rob. [macro-oneline] ; ; Standard extension

I think you will find the functionality you are looking for is in * already. Here is an excerpt from the sample extensions.conf file that is included with the source: exten => s,1,Dial(${ARG2},20) ; Ring the interface, 20 seconds maximum exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status (NOANSWER,BUSY,CHANUNAVAIL,CONGESTION,ANSWER) exten

Hi All, I'm using asterisk 1.2.15 and call forwarding doesnt work for me. from my extensions.conf: ; Unconditional Call Forward exten => _*21*X.,1,NoCDR exten => _*21*X.,2,Set(DB(CFIM/${CALLERID(NUM)})=${EXTEN:4}) exten => _*21*X.,3,Playback(vm-saved) exten => _*21*X.,4,Hangup exten => #21#,1,NoCDR exten => #21#,2,DBdel(CFIM/${CALLERID(NUM)}) exten =>

Hi, I tried to perform call forward in asterisk by writing the following in the dial plan.The data base is getting updated with the caller ID number how ever the call is not getting forwarded. [apps] exten => _*21*XX,1,Set(DB(CFIM/${CALLERID(number)})=${EXTEN:4}) exten => _*21*XX,2,Hangup exten => #21#,1,DBDel(CFIM/${CALLERID(num)})=${EXTEN:4} exten => #21#,2,Hangup Regards, Aparna

Is anyone out there using app_dbodbc (http://www.bkw.org/~brian/app_dbodbc.c)? Any problems with it? I was able to get it all working, but it causes * to segfault every now and then. It does not appear to be related to any specific function (ODBCget,ODBCput,ODBCdel,ODBCdelltree). It is 100% repeatable. If I noload the module, everything works fine, but when its running, after calls to any of the

Hi, I have two local SIP extensions (both bt100). One is on remote location behind another nat (16), but everyithing seems to be setup correctly as it can register and is listed as OK(57ms). However I can only call in one direction between those two. Extensions are defined in same context: exten => 11,1,Macro(oneline,SIP/11) exten => 16,1,Macro(oneline,SIP/16) both using same macro

Dear All, I'n trying to make a simple call forwarding, however I have small problem when evaluating an expresion. Here is my extensions.conf ... ; Unconditional Call Forward exten => _#21*X.,1,Set(DB(CFIM/${CALLERID(num)})=${EXTEN:4}) exten => _#21*X.,2,Hangup() exten => #21#,1,Set(ignored=${DB_DELETE(CFIM/${CALLERID(num)})}) exten => #21#,2,Hangup() ... exten =>

Hello I've been having the following problem today : I have a quite simple dialplan made to receive a fax: [answer-extension] exten => 1,1,Answer exten => 1,2,Macro(setcallerid) exten => 1,3,Ringing exten => 1,4,Wait(3) exten => 1,5,Macro(stdfwd3iax-notransfer,${EXTENSION},${EXTENSION},$ {EXTENSION}) exten => fax,1,Goto(faxreceive,1,1) The Wait(3) is there simply to let

Hello I upgraded to CVS head yesterday (due to the lack of zaptel drivers working with 2.6.10) And noticed that now DBGet and DBPut have been deprecated in favour of the new Set/DB one. In the UPGRADING.txt in Asterisk it says: * The applications DBGet and DBPut have been deprecated in favor of functions. Here is a table of their replacements: DBGet(foo=family/key)

hello all, another desperate request for help debugging my dialplan... from a certain extension i do the following: DBput(CFIM/${CALLERIDNUM}=${CALLERIDNUM}) a NoOp to the console says DBput: family=CFIM, key=2122022001, value=2122022001 and database show says /CFIM/2122022001 : 2122022001 so far, so good. but in a macro, when i try to get the data, exten

Yo, Inspired by the example in the tips & tricks-section of "http://www.junghanns.net/asterisk/", I built a more elaborate call divert-feature. This one validates if the extension a call-forward is to be set to is actually valid for the current context and additionally saves this context into the DB and always uses it to originate the divert from, as you can't expect the

We have an Asterisk server acting as a hosted PBX system for many clients, and we're going through an upgrade to Asterisk 1.6 by moving our most important (and complicated) clients one at a time. But we're having a problem with one customer that I really can't explain. I can place calls directly to one phone at the customer's location (they also have an IVR that asks for an

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Thanks for your reply Larry. Le 27/07/2015 01:22, Larry Moore a ?crit : > I think the "488 Not acceptable here" is occurring because the channel > connecting through is not T.38 capable, that will be the IAX channel > from iaxmomdem. This is what T38gateway is supposed to do. And I'm very happy to report that after one more

hello all, i need some help and after trying the wiki i'm even more confused than i was. i'm trying to set up call forwarding and running into problems... i want the most basic call forwarding imaginable. 1. caller dials extension (say, 154) 2. dialplan is updated to forward caller's extension (based on CALLERIDNUM) to voicemail, instead of ringing his endpoint. 3. caller is