similar to: misdn <--> zap problem

Hi, I have installed Asterisk 1.4 with mISDN with the install-asterisk.tar.gz script from beronet.com. On my system I have two cards, one a AVM Frit!Card Pci 2.0 and one HFC-S chip. I know both to work well with mISDN on my system from a previous installation. Now however, the AVM card works well at first glance, i.e. it "registers" incoming calls and works through the asterisk

Hi, i use an BN4S0 with misdn an asterisk on Linux 2.6.9. The hfcmulti module is loaded with option: type=0x04 protocol=0x2,0x2,0x22,0x2 layermask=0xf,0xf,0xf,0xf and the fourth port is connected to an ISDN PTMP (MSN) port. Call to #72 from S0 (BN port 4) are not accepted from asterisk but why ? Can anyone give me a hint ?? misdn debug messages follows: lib: NEW_CR Ind with l3id:80001

Hi, Since a week ago I am trying to get chan_misdn working with asterisk 1.4.19, using HFC based ISDN card on Linux 2.6.22. My setup is done as detailed on wiki and FAQ. * mISDN and miSDNusers are 1.1.7.2, unpacked, build and installed. After installation and misdn-init, I have this: aragorn:root/pts/1: # misdnportinfo Port 1: TE-mode BRI S/T interface line (for phone lines) ->

HI, I tried to install asterisk and mISDN via http://www.asterisk.org/downloads/yum My machine is running with kernel-2.6.18-164.15.1.el5.i686 # grep kernel /var/log/yum.log Mar 21 16:09:28 Installed: kernel-2.6.18-164.15.1.el5.i686 Mar 21 16:09:42 Installed: kernel-devel-2.6.18-164.15.1.el5.i686 I've installed the following packages: # yum install asterisk16-misdn mISDN mISDNuser

I have set up a * box with two hfc ISDN pci cards using mISDN both in TE mode with PmP mode. (using $MODPROBE hfcpci protocol=0x2,0x2 layermask=0xf,0xf) I have no problem dialing out by explicitly naming the mISDN port, ex: Dial(mISND/1/${EXTEN},60) or Dial(mISDN/2/${EXTEN},60) But it does NOT work when specifying the mISDN group: exten => _(outpattern),1,Dial(mISDN/g:TEmode/${EXTEN},60)

Hi I try to connect my asterisk with a Siemens Hicom pbx. I have a PCI cologne Chip card wich support NT mode. I have compiled mISDN driver, and I use chn_misdn from debian package. The card wotk fine in TE mode but mot in NT mode. for informations : routeur*CLI> misdn show stacks BEGIN STACK_LIST: * Stack Addr: Uid 40200001 Port 1 Type NT Prot. PMP Link DOWN --> bchan: addr 0 channel

Hello, I'm evaluating to possibility to use chan_misdn as a short term workaround, in case latest Dahdi is not stable enough for what we are planning to do (we wish to use Junghanns and Digium BRI hardware with Asterisk 1.6) . I've read www.mISDN.org but still have a couple of questions : 1. Is correct that in a 2.6.27 (and up) enabled kernel, the "embedded" mISDN version is

I'm now up&running with - mISDN with avmfritz driver for Fritz PCI card - chan_capi from debian recompiled with a patch (see below) - EuroISDN with Point-to-Point (ptp) mode (Austria) - With Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k from debian sarge But am having some problems: 1) I needed to patch chan_capi.c from debian sarge (see below) to give the new channel to asterisk in state

A plea to all! Has anyone had any success with two or more avm fritz pci cards with either misdn, chan_misdn, or chan_capi, and any version of linux 2.6.x? I have managed to get misdn to load under 2.6.13 and detect two cards using misdn-capi and chan-capi (using capiinfo and capi info under asterisk) - but the second card/controller doesn't answer or dial calls. But if I try misdn

We have ISDN PCI Adapter from Billion(using mISDN). When we connect it to the PSTN the incoming calls are OK. When we try to make a call we can't do that because the ISDN port is Down: CLI> misdn show port 1 BEGIN STACK_LIST: * Stack Addr: 40400001 Port 1 Type TE Prot. PMP L2Link DOWN L1Link:DOWN Idx: 0

Hi, I try to compile mISDN 1_1_9_2 (kernel: 2.6.32.13). I had the following compiling error: make[1]: Entering directory `/usr/src/linux-2.6.32.13' CC [M] /usr/src/mISDN-1_1_9_2/drivers/isdn/hardware/mISDN/sysfs_obj.o /usr/src/mISDN-1_1_9_2/drivers/isdn/hardware/mISDN/sysfs_obj.c: In function ?mISDN_register_sysfs_obj?:

Hi I've problem with incoming call quality to GSM gateway connected to beronet card (BN8S0), -----> [ GSM Gateway ] -------> [ BN8S0 ] ==== asterisk Port connected to GSM gatway is in TE mode , gateway is in NT mode , When I dialin to cellphone numer , call goes to 'from-eragsm' context, to Echo application. [from-eragsm] exten => 700,1,Goto(600,1) exten

Hi I have beronet BN8S0 isdn card in my asterisk and , card is working fine, but when I try to dial to special number 118913 ( telephone number information) from polish telecom TPSA, I always geting timeout . Bellow is isdn signaling dump : --> * CallGrp: PickupGrp: --> rxgain:0 txgain:0 --> * dad:118913 tech:mISDN/2-u25 ctx:default --> * Setting Context to from-tpnet -->

Hi i've installed this software: ******************** SOFTWARE mISDN-1_1_7 mISDNuser-1_1_7 Asterisk-1.4.15 ******************** SOFTWARE misdn is correctly loaded by misdn-inist start Here there is the misdn.conf (copied from an existing and working installation with Asterisk 1.2.x and one BN8S0) ******************** MISDN.CONF [general] misdn_init=/etc/misdn-init.conf debug=0 bridging=no

Hi, Hi All, I've just delved into the world of asterisk and I'm having a few dtmf issues. Internally, amongst sip phones, dtmf is fine. Externally, if you ring from a GSM mobile, DTMF is fine, however if you ring from a standard phone, DTMF fails to register. I am attempting to use a quad port HFC-4S Beronet Card. I've been searching the web most of the last week and

Hi to all asterisk-users ;) As some of you may know, Kernel 2.6.32 includes a module for the infamous Fritz passive ISDN cards in conjunction with mISDN. I just would like to know if anybody has tried to use a Fritz card as a BRI adapter for Asterisk with the new module. If so, i would be grateful for some hints or howtos. I am willing to try this myself, but i am quite reluctant as i have

Hi, Before diving into this, I would very pleased to know if someone could yes or no, successfully compile mISDN 1.1.8 on Lenny (latest RC1 or beta2 version) ? Regards After a fresh install on Lenny, I can reproduce at will : apt-get install build-essential linux-headers-2.6.26-1-686 cd /usr/src wget http://www.misdn.org/downloads/mISDN.tar.gz tar xvf mISDN.tar.gz cd mISDN-1_1_8 make ....

I have a hfc-usb adapter connected to a Samsung PBX, and am having a bit of trouble. With capi, using 'immediate' mode, I can get the dialplan working just fine, except that there is some sort of interference in the audio, and I'm not quite sure how to describe it except that it's sort of like clicking and popping but not harsh at all, and more like just bits of audio missing.

Hi, I'm bumping on this : cd /usr/src wget http://www.misdn.org/downloads/mISDN.tar.gz tar xvf mISDN.tar.gz cd mISDN-1_1_18 make <snip> In file included from /usr/src/mISDN-1_1_8/drivers/isdn/hardware/mISDN/core.h:9, from /usr/src/mISDN-1_1_8/drivers/isdn/hardware/mISDN/avm_fritz.c:20: /usr/src/mISDN-1_1_8/include/linux/mISDNif.h:791: error: field

Have you got termination set correctly? I have a B410P working with 2 x NT and 2 x TE ports successfully. I had to turn the 100ohm termination on on the NT ports (even though I have them set as PTP in mISDN.conf). HTH -->> -----Original Message----- -->> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- -->> bounces at lists.digium.com] On