Displaying 20 results from an estimated 1100 matches similar to: "Sound quality issue in one direction and wctdm problem with APIC enabled kernel"
2005 Jun 18
3
FATAL: Error running install command for wctdm
I got a new motherboard and upgraded Asterisk, ... However, I am not
lucky enough to get it running again.
To compile went ok, besides this remark at the end of asterisk:
WARNING WARNING WARNING
Your Asterisk modules directory, located at
/usr/lib/asterisk/modules
contains modules that were not installed by this
version of Asterisk. Please ensure that these
modules are compatible with
2003 Dec 23
3
Problem - installing TDM400P module
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031223/62cf404e/attachment.htm
-------------- next part --------------
Hello
When I tried loading TDM400P module using insmod command, I get following error messages. Is there some problem with my asterisk installation. Please advise. Thanks Tony
$insmod wcfxs
Using
2004 Apr 19
1
Not working!
I downloaded the cvs development of zaptel...
It seems to compile ok, but when ismod I get:
lp:/usr/local/src/zaptel# /sbin/insmod wcfxo.o
wcfxo.o: unresolved symbol zt_ec_chunk
wcfxo.o: unresolved symbol zt_unregister
wcfxo.o: unresolved symbol zt_alarm_notify
wcfxo.o: unresolved symbol zt_hooksig
wcfxo.o: unresolved symbol zt_transmit
wcfxo.o: unresolved symbol zt_receive
wcfxo.o: unresolved
2004 Apr 19
0
RV: Not working!
You where SOO right.
My idea is to connect the "line" to my pbx and call from internet
(h323?) to my linux box, and then dial an extension.. Is there any doc
there? Cause Ive read a few and I did not get much really. I should
configure asterisk now and the job is done?
-----Mensaje original-----
De: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com] En
2005 Feb 28
1
I can't load modules (ztdummy, wcfxo.o)
Hi to everybody,
seems that I cannot load the zaptel modules:
ztdummy says the following:
[root@Hayabusa misc]# modprobe ztdummy
/lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_unregister
/lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_transmit
/lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_receive
/lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_register
2005 Mar 03
2
Installing modules for TDM400p
I have linux 2.6.5 running on my machine.I downloaded The latest
version of Zaptel from the cvs repoistory.Compiled zaptel with the
"make linux26" option. Installed it by modprobe which gave no
errors.However when i did "modprobe wctdm" i got the following error.
"FATAL: Module wctdm not found."
I have no idea why it's happening.Tried Googling but got nothing.ANY
2004 Apr 30
2
Can not compile zaptel at SuSE 9.0
Hello all,
I am not able to compile zaptel...
I am using kernel 2.4.21-202 and it's source is linked to /usr/src/linux. I
already have to test installations running at SuSE 9.0 (but here I have an
SMP system with to processors).
Could you give me a hint?
/usr/src/linux/include/linux/highmem.h:93: error: `clear_user_page'
undeclared (first use in this function)
2004 Aug 11
3
X100P outbound only (Don't answer)
I tried implementing my * and it didn't pass the spouse factor at this
time. I wanted to hook it up for outbound only at this point to get a
better handle on the dial plans and the echo problem.
I thought this might have been done before as a natural part of testing
- but maybe not.
In wcfxo.c I found this:
if (!wc->offhook && !wc->ringdebounce) {
if
2007 Jan 25
1
issue with ivtv & wctdm zaptel drivers (TDM PCI Master abort)
Hi,
I'm experiencing an issue with my x86_64 machine containing a Hauppauge
PVR-500 (ivtv) and a Digium TDM400p (wctdm, part of zaptel) PCI cards.
Independently of each other both cards work fine, but once the wctdm driver
is loaded and mythtv tries to record something on the PVR-500 the wctdm
driver freaks out. The error message is see is "TDM PCI Master abort"
printed over and
2005 Mar 28
0
bristuff-0.2.0-RC7k: error on loading qozap : "qozap: Unknown symbol zt_xxxxx"
Hi,
I had problems described in another thread so went from a start, but now
have problems when loading qozap module. I get :
# insmod qozap.ko ports=9
insmod: error inserting 'qozap.ko': -1 Unknown symbol in module
and in /var/log/messages:
module qozap unsupported by SUSE/Novell, tainting kernel.
qozap: disagrees about version of symbol zt_receive
qozap: Unknown symbol zt_receive
2005 Mar 22
1
Problems loading zapata module under suse 9.2 (cvs stable from 5 days ago) ?
Hi,
I've compiled Asterisk cvs stable (few days ago) unde Suse 9.2 without any
problems. We're using te110p and wcte11xp module that is autoloaded by Suse
9.2.
Card goes green after reboot, but this meesages appear in logs:
Mar 22 11:28:51 linux kernel: Zapata Telephony Interface Registered on major
196
Mar 22 11:28:51 linux modprobe: FATAL: Error inserting torisa
2005 Aug 18
1
Zaphfc.ko module error
Hi Guys
I have been running a test server for a few days now with * 1.0.9 bristuff
RC8n. I had a power failure and the test machine was not on the ups. When
power was restored I found the following error: FATAL: Error inserting
zaphfc (/lib/modules/2.6.11.4-20a-default/misc/zaphfc.ko): Unknown symbol in
module, or unknown parameter (see dmesg)
My dmesg output: zaphfc: unsupported
2011 Mar 17
1
[1.6] Where to put "options wctdm opermode"?
Hello
The Ubuntu Asterisk package doesn't install
/etc/modprobe.d/dahdi.conf, so I was wondering where to put the
following line:
=======
options wctdm opermode=FRANCE
=======
Should it be in /etc/dahdi/modules?
=======
options wctdm opermode=FRANCE
=======
Thank you.
2005 Jan 05
1
modprobe: Can't locate module wctdm
After getting zaptel from the CVS server, compiling and installing it I
type:
modprobe zaptel
and all is well. Then I type:
modprobe wctdm
and I get this:
modprobe: Can't locate module wctdm
Any idea why?
I did this yesterday but with the CVS head of Asterisk and I got by this
part without a problem. I reinstalled it all today because I wanted the
stable release on our server since we
2005 Sep 12
1
wctdm module won't load after kernel upgrade
Hi all,
I have installed a TDM22B on an IBM xSeries 220 with FedoraCore 3 and setup asterisk cvs head to work properly.
A few days ago, I tried to update the system kernel to 2.6.12 from 2.6.9 and also to change to asterisk stable 1.0.9.
After compiling zaptel and asterisk, i loaded zaptel and tried to load the wctdm module but this failed with the following message:
Notice: Configuration file
2007 Sep 13
1
how to disable wctdm auto modprobe during boot
Hi,
I've installed Asterisk with a TDM400P on a Debian Etch distro.
When I reboot the server I get zaptel and wctdm automatically loaded.
I'd like to avoid this behaviour.
How can I disable this automatic "modprobe wctdm" during boot?
Thanks
Giorgio
2009 Jan 12
0
WCTDM/Zaptel memory leak
I have a bit of a memory leak in Asterisk 1.2, but only when using an
analogue card (TDM400 or equivalent) and wctdm + zaptel
Asterisk eventually grows over a period of days/months (depending on how
busy it is) then crashes and burns. I've seen it with all versions of
asterisk up to 1.2.31, but only ever with an analogue card fitted, using
wctdm. VoIP only, or systems with ISDN2 and
2004 Jul 19
0
Cant compile Zaptel at all
I have been trying to compile Zaptel 1.0-RC1 that I just downloaded via tarball on my debian 3.0 system running a 2.4.26 kernel. I have all the headers, libraries and sources installed for the kernel along with the latest versions of GCC. I dont know what else to do to trouble shoot this so I have included the entire output below.
Thanks a lot!
-James Freire
linux1:/usr/src/zaptel-1.0-RC1#
2004 Dec 05
2
ANALOG FXO ZAPTEL & WCFXO & WCTDM module issues seen with intermittent analog lines
Hello, I have found a "bug", I think in the way TDM400P cards handle FXO
interface disconnect/re-connect problems. Normally I do keep all the wires
connected from my CO / PABX quite securely, but I had a need to re-route the
cable from one side of the desk to another, and I simply disconnected the
RJ-45 connector and plugged it back in. THIS PROMPTLY RESULTED IN VERY VERY
SCRATCHY AUDIO
2005 Jun 21
1
modprobe wctdm waiting for ever
Hi,
I have a pentium 4 with Intel motherboard and one TDM400P (2 fxs, 2fxo)
modprobe zaptel is Ok
but
When I execute modprobe wctdm never load the module, I can wait for 1
year but never response me (error or OK). I need to do ctrl+c
Any idea?
Edgardo
>>> jan@irial.com 06/21/05 10:07 AM >>>
i know that there are extensive rework on the transfer in SIP at the
moment.
--On