similar to: FW: BLF not working after reload

Hi there, I am running Asterisk 1.2. I have a Grandstream GXP2000 and Aastra 9133i with BLF/Speedial configured for other extensions. The hint's are all configured in extensions.conf and it seems to work as it is supposed to until I reload the configuration in Asterisk or reboot the server. Then neither phone displays the BLF of other extensions until I reboot the phone. It continues

Actually, I have tested this here with an Aastra 9133i and an Asterisk@Home server, and the 9133i will re-subscribe on its own after an Asterisk reboot, if you wait long enough. It took on the order of an hour to do so. Of course, a phone reboot will get it done faster, if necessary, but it _will_ eventually re-subscribe on its own. > Thanks Olle, > > So am I to understand that you

Actually, I have tested this here with an Aastra 9133i and an Asterisk@Home server, and the 9133i will re-subscribe on its own after an Asterisk reboot, if you wait long enough. It took on the order of an hour to do so. Of course, a phone reboot will get it done faster, if necessary, but it _will_ eventually re-subscribe on its own. In another thread, I've seen a response that the GXP2000

Version - Asterisk SVN-trunk-r12793M (1.2.4) I have 4 Grandstream GXP 2000 phones configured. However at the moment, I have had to disable BLF, Hints, and Call Limiting due to an extremely annoying bug which seems to make the phones channels "lock" in busy after a call has been hungup. If I do a show hints after say extension 200 has hung up I get the following -= Registered

Hi all Slightly OT but I know a lot of GS experts hang out here - I just upgraded a GXP-2000 to firmware 1.0.1.13 to try out the BLF functionality with Asterisk (which so far works as expected), but as a side-effect the phone won't sync with an NTP server - I've tried different server names (time.nist.gov and pool.ntp.org) and IPs in the config, but it refuses to update the time on

I am trying to set up the BLF on a GXP2000. Currently what I have is extensions.conf: [globals] polycom430=SIP/101 [internal] exten => 101,1,Macro(voicemail,${polycom430}) [macro-voicemail] exten => s,1,Dial(${ARG1},10,tT) exten => s,2,VoiceMail(u${MACRO_EXTEN}@default ) exten => s,102,VoiceMail(b${MACRO_EXTEN}@default) [ext-local-custom] exten => 101,hint,${polycom430}

Hello, I have some trouble with the BLF indicator. I have two phones that use the same hint: 13 => hint,1,SIP/phone13&SIP/phone13-wlan This works great from the asterisk side, but it seems the status change is too quick for the attached Grandstream-phones. When I ring the extension the hint changes to "Ringing". The Grandstream blinks. Great. Now, when someone picks up one of

FYI, spoke with Grandstream this morning, the GXP-2000 release has been delayed again. Looking like April now before these hit the street. -- Cory Andrews Senior Partner VOIPSupply.com +++++++++++++ V: 800.398.VOIP X22 F: 716.630.1548 E: Cory@VOIPSupply.com

Dear all, I've implemented BLF for use with some Grandstream GXP-2000 phones and it works fine in 1.2.x versions of Asterisk, although I tested it with version 1.4.0 and it doesn't work! Has the needed syntax changed for configure BLF for this version of Asterisk? It it a bug of this version? Or should it be misconfiguration that I'm doing? Thanks, Ricardo.

Hi, I used Grandstream (gxp2000, gxp2020) and Snom (370) SIP Phones, but with 2 extensions BLF status does not work correctly. have someone ever tested a Sip Phone with more then 60 BLF without problems? Can someone suggest me model and brand? Thanks, bye. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Stopping and restarting Asterisk will lose the hints, then you will have to wait until the phone registers again. With 1.2.7.1 a reload shouldn't lose anything. Change the register time on the phones to something less that 60 minutes if it's a big problem. Instead of factory defaulting the phones you might find a simple restart will re-register the phone and BLF will work on the phone.

Hello all Sorry for the repost, but I believe this is essential for Aastra phones to use directed pickup with BLF in 1.2 (and it's still experimental in 1.4 I think). pickup-mgernoth-2006-07-28.patch.txt If anyone knows otherwise than that this is still required in latest 1.2 or 1.4 please reply with success/failure stories. Any info would be appreciated. We can get directed BLF pickup

After working with the Grandstream GXP 2000 series phones, I have decided that I am quite unhappy with their problems, both voice quality, volume, features and others. For their price now, there are plenty of phones to choose from as well. So subjectively what would be the best Hardphone for a small/medium business with multiple line support, BLF, etc. Are the Cisco 7960 the best of the

>From the usual place, http://www.grandstream.com/BETATEST/GXP2000/ Note, there are two (and it took me a bit of a while to figure out) images to be loaded. Copy the ...a.bin's and the .bin's to your http provisioning directory, and reboot. The phone _must_ load the .bin files before it understands the ..a.bin files. After it loads the first one, the phone does lock up with the

*lol* I think he was referring to a ASTERISK reboot, not a phone reboot. > -----Original Message----- > From: Olle E Johansson [mailto:oej@edvina.net] > Sent: Thursday, March 23, 2006 1:15 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] Re: Subscription state after reload (New > subject) > > > > 23 mar 2006 kl.

How can a reload clear registrations? If I 'reload' without using realtime, I keep my sip peers (as well as astdb). I can still contact other phones... registration info is still there. If I `reload` with realtime, I lose my sip peers (but astdb remains). I can _STILL_ contact other phones.... registration info is still there and Asterisk must be referring to astdb to find the IP

Hi, We have a user who is putting large call volumes through Asterisk, and wants to BLF monitor up to 90 extensions. We are struggling to find a handset that can keep up with Asterisk :) 1) Is there a handset that will do this? 2) Is there a different (standard) way to send BLF and allow directed pickups? 2a) Or even a handset specific way? Asterisk handles the BLF volume fine, even on quite

Hi Guys we have a system that uses a lot of custom hints based on the extension the extensions use the format of ext-system for example 200-pbx01 when starting asterisk the "core show hints" show the correct hints and blf works as expected in the extensions.conf we have _.,hint,Custom:${exten} when running dialplan reload all the hints lose the dashes (-) they become 200pbx01 of course

Hi. Does anyone have a patch or workaround for the 50 BLF limit of Aastra phones? I have a couple 57i with the 560M console and only the first 50 BLF lines get registered. I am using the latest firmware from Aastra but I read that this limit was imposed because of a memory leak. Obviously my customer is complaining about these last 10 lines not showing their status. -- Telecomunicaciones

Hi, I need to make use of BLF feature on Aastra 6757i phones but its an Asterisk 1.4 using realtime architecture. Extensions are defined in realtime database and dial plan is in AEL. I am able to correctly setup hints in the dialplan, but they don't work. Did some research and found out that hints don't work work with realtime extensions. Is there any work around? On voip-info I read