similar to: Choice One PRI?

Hi, all. I've just had my T1 re-provisioned to ISDN. Everything comes up and seems to work fine, with the minor detail that there is no audio whatsoever. So: voice prompts are played, caller ID and DID information is seen and acted on, etc., etc., etc., but at no point is any audio heard on either in-bound or out-bound calls. Here, respectively, are my zaptel.conf, zapata.conf, and the

Hey, all. I quoted a customer about $100 for some cheap SIP phones. I was planning on using the BT-102's, but he called said they look like "Princess phones," and I have to admit that he has a point. Some of the other inexpensive phones look decent, but (for example) the SPA-841's wiki entry says the remote end gets a lot of static. Since it'll be being used from a noisy

[Please excuse if this is a repeat; I initially tried to send it from a different account, and it's been held up for a couple of days awaiting moderation.] 1) What's the absolute minimum required (hardware-wise) in order to get one in-bound POTS line into Asterisk, and then have IP phones "inside?" [In other words, I obviously need a NIC -- but what would be the

> Post your extensions.conf and what's on the CLI (asterisk -r) As requested: # cat /etc/asterisk/extensions.conf [incoming] exten => s,1,Answer() exten => s,n,NoOp(CallerID is ${CALLERID}) exten => s,n,NoOp(DID is ${DNID}) exten => s,n,Background(enter-ext-of-person) exten => 1625,1,Playback(digits/1) exten => 1625,n,Goto(digits/1) exten => i,1,NoOp(CallerID is

I just made a DFS link that pointed to another DFS share on a different server... It seems to confuse the Win'XP client a bit, but it can be made to work. That means.... I can build a tree structure w/ DFS. I can arrange all my servers and shares into a hierarchy. It may not be practical, but in theory, This could be used as a hierarchical substitute for the network neighborhood. I could

Hey, all. I'm planning on migrating a W2K3 server to a Linux solution. It needs to be AD-aware, support ACLs, etc. This isn't something I'm doing Right Now(tm), so I can wait a little bit. A couple questions: 1) Are there any known issues with BTRFS? 2) Which version of Samba would be most appropriate for this? 3) AD integration: I've never really done it (with success); any

Hey, all. Just wondering if there's a GUI out there -- preferably OSS, but I'll take what-have-you -- that a) can run on an Ubuntu/Debian box, and b) allows a receptionist to see what calls are in-process, and forward calls from their phone to somewhere else. Thanks! -Ken -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

This is an automated email from the git hooks/post-receive script. arrfab pushed a commit to branch master in repository centos/centos.org. The following commit(s) were added to refs/heads/master by this push: new d2b87a3 Reflected new 7.9.2009 release and updated AMI IDs for AWS d2b87a3 is described below commit d2b87a32dda9b2e3b16ad2a55343ae63d000a64d Author: Fabian Arrotin <arrfab

This is an automated email from the git hooks/post-receive script. arrfab pushed a commit to branch master in repository centos/centos.org. The following commit(s) were added to refs/heads/master by this push: new 34ad21c Updated page for AWS AMI images ID and link 34ad21c is described below commit 34ad21c7bdf8b4190fed5ab9facc149199598da2 Author: Fabian Arrotin <arrfab at

Hey, all. I love having a PRI to play with -- lets me do all sorts of things with DIDs, fax-to-e-mail, etc. But for a small shop, a T1 is pretty pricey. Is there any reason that a BRI can't do exactly the same stuff, but on 2B+D instead of 23B+D? "Enquiring minds," etc. -Ken -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to

http://downloads.polycom.com/voice/voip/sip_sw_releases_matrix.html Howdy, all. What's the difference between "split" and "combined" firmware, which can be seen at the above link? I've googled to no avail, I'm afraid. Thanks! -Ken -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

Hello, this is a request for assistance that I submitted earlier, this time with the dataset. My mistake for taking up bandwidth. I've also rephrased the question to address an additional concern. I'm working on a windows XP machine with R 2.8.1 1). I'd like a barchart (or other lattice type display) HSI ~ of the three factors (Region, Scenario and HydroState). However

Hey, all. Just added an analog card to our dual-T1 system... and clearly I'm doing something wrong. Less interested in having the specifics pointed out than in finding out how/why certain things work. So, really, three things: * What the bloody Hell is the difference between dahdi-channels.conf and chan_dahdi.conf? (And who thought it was a good idea to have two files with,

Our setup: We have a DS3 from Global Crossing terminating into a Adtran MX2800 M13 mux. From there, groups of 4 T1's run into T410P digium cards to 7 individual servers. Each trunk is configured as ISDN PRI, B8ZS/ESF, D-channel being chan 96 with B-channels of 1-95 (we're using NFAS). The D channel is up and there are no alarms. We see the connection on the console from the

Docs? Polycom has docs? Where would one find this fabled land of... err I mean Polycom does stating what ftp servers are supported? Doug. -----Original Message----- From: Ken D'Ambrosio [mailto:ken@jots.org] Sent: Tuesday, March 07, 2006 12:12 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re:

Hello List! We have problems setting the right caller id on outgoing calls. The Asterisk Pbx is located in Bucarest(Romania), our Telco provider is rcs-rds.ro. We have the local telefon number 40787 00-99, associated to our PRI E1 Line. Where 00-99 are the DID numbers available. The telco is aspecting a 3 digit long Callerid from us, for example like "710", for the extension 10.

SYNOPSIS Erratic red alarm T1 PRI on asterisk, but zttool running concurrently during alarm shows no errors, irq misses, or alarms, on any span. Using asterisk and quad Digium T405P, configured as follows: Span 1 connects to ISDN PRI (fractional 8 B channels, D channel 24). Span 2 connects to T1 Mux and analog stations. Span 3 connects to ISDN PRI Nortel BCM hybrid key system digital trunk.

Hi, all. I've got a fax extension in my extensions.conf, but spandsp never sends my faxes there. Both applications -- txfax and rxfax -- are registered by Asterisk, so they compiled and installed correctly. I've got a Sangoma A104 card, and (as some people had suggested) have loaded ztdummy. Everything seems fine, except that it never gets recognized as a fax. I've even turned off

Hi, all. Got my Uniden UIP200 today (ordered from thetwistergroup.com), and was very excited to set it up... until I came to the realization that there were no docs with it whatsoever. There was, however, a sheet of paper with the stock warnings (don't use the phone in the tub, etc.), AND a URL -- for documentation. Score! Well, no. The URL it gave me, bcs.uniden.com, does indeed have

Hi, all. I want to have a button on my receptionist's 601 that, when pressed, will forward her current call to a given extension. Is there any way to do that? I've tried to RTFM, but I'm coming up empty. Thanks, -Ken D'Ambrosio