similar to: Mitel 5220 IP phones

I know this is not strictly an asterisk issue but it is related I guess. Just to let you know that after many calls to Mitel the consensus is that they will be releasing a new version of the 5220 that is dual boot (minet and SIP) next week or the week after. This firmware will only appear on NEW phones manufactured after the release date (no one could confirm but the 23rd of sept was

Hello, I have seen the Mitel 5055 SIP phone mentioned a few times on the list, does anyone have any wonderful or horrible things to say about it? We are thinking about using them because they have many more programmable buttons than the Snom200 phones and are about $70 cheaper. Thanks, MATT---

Hi Folks, Just in case there are any Mitel gurus here: 1) Is it possible to convince a non-dual mode 5220 phone to 'upgrade' to the SIP firmware? I have inherited one that's Minet only. 2) I have a 5310 conference unit and 5235 phone in SIP mode, but someone's lost the connecting lead. Can anyone recommend anywhere in the UK for a replacement lead or confirm the pin-out so I can

Does anyone know if this phone can or does work with Asterisk ? I have a potential client who wants to throw away their current mitel ip system (keeps crashing on a regular basis - not good for a phone-based company), but are reluctant to purchase new handsets. Thanks. Julian.

Have some 5220's that are MiNet only and I was wondering if anyone has ever reflashed it to MiNet/SIP. Tried to fake out the phone by redirecting it to a TFTP server with the SIP image, it loads it, freaks out, and reboots. tia

Hello, Long time subscriber/reader of this list - thank you for all the great ideas. Scenario: We currently provide a hosted ACD system using Mitel phones (speaking the Minet protocol) to an NCI based server solution. The logic behind this choice was the emulation of key system features etc... Many of our clients have asked for basic call queue functionality: - Agents having the ability to

Anyone had any luck configuring the hold button successfully on a Mitel 5220 SIP phone? Xfer works great. Call completion works fine both directions. Audio has been beautiful. With a working system hold button, this would be a really usable phone. The hold button does make the call appear to be on hold: the light is blinking, the other party is still silently connected, I can pick up a call on

Rene, We are using the 5220 with Asterisk with no problems. The current firmware for the phone is 3.1.0.10, which you can download from http://sipdnld.mitel.com/ If you post your sip.conf file we can see if there's any errors. Cheers Rob -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have a problem which I need to resolve. We are trying to put an asterisk between a Mitel PBX and the world. We are adding Voip service via Asterisk. Here is are config files for the settings but our problem is the following. We are able to send calls to the Mitel pbx and it's the T1 connections is green saying it's ok. The support department from Mitel said that they use e&M and

Hi, I have a client using Mitel 5212 phones in SIP mode with a 1.4.21.1 Asterisk server (and a couple of previous 1.4 versions). They're mostly happy with the combination except for this one issue. For incoming calls only, either originating from other local SIP phones or from a PRI, calls won't get bridged (remote party get's hung up) if the call is answer too quickly on the

Hi all, Our company has deployed a Mitel 3300 system (only about 2.5 years ago) and we are experimenting with setting up Asterisk in our head office (for business continuity, ie we have a bird flu epidemic and no-one can come in, therefore use SIP softphones at home to co-ordinate activity) and at a remote site in the Isle of Man (connected via 2Mbps SDSL) Ideally we'd like anyone on either

Does anyone have any experience getting a Mitel SX-200 EL/ML PBX system to work with *? I'm not getting inbound or outbound calls to work. (Inbound caller gets line busy tone.) SETTINGS FROM MITEL: I built a Crossover cable and connected it like this: PSTN--T1--ASTRISK--T1--OLD MITEL -Crossover Cable Pin-out: 1 - 4 2 - 5

Hi All, Our experience with * to date has been a bit limited. It's a 4xCisco 7960 network, linking our head office with a faraday caged datacenter. As a way of putting voicecomms into a sealed room, it was quick and easy to deploy, and works very well. As typically happens, we've now thought about extending the use of asterisk - and a new opportunity has cropped up. In three months

Hi, Some Mitel products, which are CentOS 6.x or 7.x servers based with some telephony services added, are only supported on VMware virtualisation platform, even all if theses CentOS guests are certified on last CentOS/Redhat Virtualization or Microsoft Hyper V platforms. So, at he moment we have three bad choises : - Migrate part of our virtualization services from KVM/libvirt to VMware ; -

Hi: I've got a dozen Mitel 5020 IP sets and can't find out if they do SIP, or even find an administrator's manual for them. Mitel has been rather unhelpful. They only deal with "partner resellers." Has anybody used these with Asterisk? -Stephen-

Hi, folks: I've come into some Mitel 5020 IP phones. A client has made a significant investment in them and we want to see if we can use them in a new system. Are these even SIP sets? I haven't been able to find out. Mitel's site barely covers them (I was only able to find some user guides, which are effectively useless; they say nothing about configuration and provisioning). Has

We have integrated an Asterisk (TE110P) and a Mitel SX200. We usually get over 500 frame errors and over a 500 slip errors per hour. When the errors reach 1000 per hour the Mitel will take it's T1 card offline. At that point no calls can be routed from the Asterisk server to the Mitel and the TE110P reports a Yellow alarm. What can be causing all these Frame and Slip errors? We have been

I have a small government department that wants me to implement a Asterisk installation, however, they connect to the Government PBX, a Mitel SX200, and want to keep the ability to do that. I know there is no chance to connect the digital extension lines, but would it be possible to have the pbx admins send analogue extensions over and have those lines interface through an FXO interface? Or

Hello all. I just received a TE110P and am trying to hook it to my Mitel 200SX has anyone successfully done this? My configuration is as follows. Asterisk -> TE110P ->Kentrox (csu/dsu) -> Mitel T1 Card. All I get is a blinking yellow on my TE110P card and an alarm on my Mitel. T1 card. Any advice would be great. Zaptel.conf span=1,0,1,d4,ami e&m=1-23 dchan=24

Eric "ManxPower" Wieling wrote: >> >>> span=1,1,0,d4,ami >>> e&m=1-24 >>> > > Looks like you have told Asterisk to get it's timing from the Mitel. > I'll bet the Mitel is trying to get it's timing from Asterisk. > > Try span=1,0,0,d4,ami and run ztcfg -vvv > I just set this back. It was originally set to your