similar to: Very cheap IP GSM Gateway: Will this work?

Hello everyone, I'm trying to set up a Asterisk server. I have two cards - one is an BeroNet BN2S0 with two ISDN lines (4 channels): http://www.adcomtec.com/webstore/beronet_bn2s0.php?cat=90 and a Rhino R8FXX with one FXO module and two FXS: http://www.voipsupply.com/product_info.php?products_id=2940 I would like to set up an Asterisk server with 8 phones, which will share the phone

Hello Even the cheapest GSM gateway I found for a simple SOHO server costs over $300. If possible, I'd rather have a local solution than use a remote VoIP provider to have Asterisk make outgoing calls to the GSM network. So... I was wondering if there are some entry-level cellphones that can somehow be hooked up to a PC running Asterisk and used as an el-cheapo GSM gateway? Thank you.

Hi there, I know this question is kind of stupid. But, I don't know anywhere else to ask. I've received some answers when I asked about the need of having a zaptel interface to make the meetme application work, that said that it was better to have a real hardware then the zaptelrtc software modules. So, my question is, would any of the following cards work with the meetme

I am looking to replace all of the old "Bell" (POTS) phones in my home and office with IP phones. As you can imagine I don't have a huge budget to work with but I want phones that will provide acceptable voice quality and durability. There are basically three categories as I see it 1. satellite phones (low cost, low function) 2. primary domestic phone (good quality, POE capable,

Hi, I found E400P quad PRI card quite cheap (749USD): http://www.govarion.com/product_info.php?cPath=1&products_id=2&osCsid=68cdd6e3d08754 in comparison to te410p (approx 1500 USD ) http://www.digium.com/index.php?menu=product_detail&category=hardware&product=TE410P Now newer generation with HW echo canceling emerged (te411p). I'm not sure in what things those two cards

Thanks to the great support at Rhino Equipment and Digium, this has finally been solved. I wanted to post the solution back to the list in case anyone else is having a similiar issue. I started by calling Rhino support so I could eliminate channel bank configuration as the issue. We were able to determine the channel bank and signalling were all working as expected. I then began to monitor

I'm considering building a network gateway using a Via EpiaCN10000EG motherboard like seen here: http://www.logicsupply.com/product_info.php/cPath/79/products_id/444 I've heard that this is a pretty recent mobo and drivers for it are in Ubuntu but that a 2.6.9.x CentOS kernel might have troubles with it. Anyone have any opinions on this mobo? Thanks jed

On Sat, 21 Dec 2019, Bartosz wrote: > Hi Roger, > have you ever tested the > ups.delay.start: 40  > parameter in action? > Does it actually work in your UPS? Yes, thoroughly tested, and it works as described in my Configuration Examples. (Including correct operation during this morning's storm :-) > Could you send me a link to your UPS on the Internet? I see that there

Hi everyone, For ssh(1) to override global options with the options in "Host" block, the attached diff (w.r.t. the openssh code in FreeBSD 8.1-R) contains the code to do so while parsing ssh configuration file. This is useful for case like following where {d,proj,p,n}cvs.FreeBSD.org is an alias to ncvs.FreeBSD.org hostname, thus connecting to {d,proj,p,n}cvs.FreeBSD.org should utilize

So, I'm still having this problem with outbound calls not working when using a channel bank. I've purchased a Rhino FXO channel bank from VoIPSupply.com to make sure it wasn't an equipment problem. I am using a Digium TE411P card, and have simplified it down to just 1 port plugged into the channel bank, with just 1 analog line plugged in. If I place an inbound call on the line, it

Hello, I am wondering are there plans for porting WINEHQ to AmigaOS 4.x running on PPC? 1) http://amigakit.leamancomputing.com/catalog/product_info.php?cPath=47&products_id=826 2) http://amigakit.leamancomputing.com/catalog/images/osfour_shots/shot1.jpg 3) http://amigakit.leamancomputing.com/catalog/images/osfour_shots/shot2.jpg 4)

I'm looking to handle 3 PSTN lines with my Asterisk server. I have a Digium TDM22B and Sipura 3000. The Sipura works great, but the TDM22B seems to have terrible problems with my board---virtually all peripherals need to be disabled in BIOS, and then there is terrible noise, terrible silence and virtually no ability to use DTMF in IVRs. I really wish the TDM22B worked, because I much

I would like to have your comments regarding: 1) drivers/rhino.c ------------------ The following patch addresses some problems in drivers/rhino.c. Or that is what I think. I don't use this hardware. The patch: 1. Eliminates some usefulness definitions. 2. It removes code that evaluate the time. I can't see how the code actually does useful work. 3. The

I'm running the samba-client-3.0.20-0.1 SUSE RPM. I was using the version that came with 9.3 but upgraded to see if this specific problem would go away. Guest access does not appear to be working correctly, and it looks like the problem is due to guest not getting mapped into the LDAP query correctly. Specifically, I can login with local account, join workstation to the domain, browse

Had a fairly horrible lightning storm night before last, and four of eight ports in a 1.4.20 machine stopped answering. In the CLI: budsw*CLI> zap show channels Chan Extension Context Language MOH Interpret pseudo default en default 1 from-zaptel en default 2 from-zaptel en default

The if() statement always evaluated to true. Detected by "cppcheck", not tested on real hardware. Signed-off-by: Thomas Jarosch <thomas.jarosch at intra2net.com> --- drivers/rhino.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/rhino.c b/drivers/rhino.c index ca66169..e478bcb 100644 --- a/drivers/rhino.c +++ b/drivers/rhino.c @@ -187,7 +187,7

Hello, My first attempt to get dahdi running on 1.4.28... with a Rhino 8 port modular card and a single FXS module. Got the Rhino card installed and the machine sees it: root at pbx:/etc/dahdi# dmesg | grep rcbfx [ 71.985309] rcbfx 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 71.985440] rcbfx 1: Rhino PCI BAR0 50100000 IOMem mapped at ffffc90008d7c000 [ 71.985504]

FYI Arnaud ---------- Forwarded message ---------- From: Silvino Benevides Magalhaes <sbm2yk at gmail.com> Date: 2009/10/14 Subject: Re: about solis and rhino To: Arnaud Quette <aquette.dev at gmail.com> Hi Arnaud, I was on holiday, so I only answer you now. About rhino, I received a document contains the its protocol and a little box with rhino firmware to testing driver

Hello, The company I work for recently purchased 2 Rhino CB24s and a Rhino PCI-E R4T1. The channel banks are plugged into the R4T1, as well as 2 PRIs from our telco. The CB24s are for all internal analog phones. Most of the phones are setup in "batphone mode", which is "immediate=on" in the DAHDI config. They are set up this way because we are an outgoing call

Thank you very much for this hint. My apologies that I messed up a thread for my post - I had a message open and simply clicked on the link ... slap slap. Would anyone know of a better choice to multiplex three fxo lines into an asterisk box? I can still use three Digium X100P cards, but methinks, a seperate unit would be better. Thanks again, Peter >> I am located in the UK and