similar to: Asterisk 1.0.8 and TDM stop acking inbound calls?

Hello. I have a MinITX motherboard with only one pci slot and one onboard ethernet interface, I have a TDM04B card plugged into that motherboard and the /proc/interrupts: CPU0 0: 169626332 XT-PIC timer 1: 1270 XT-PIC i8042 2: 0 XT-PIC cascade 8: 4 XT-PIC rtc 12: 170166219 XT-PIC eth0, wctdm 14:

Hello Since TDM cards are known for being particular when it comes to motherboards (PCI 2.2, etc.), I was wondering if there is a utility that can check that the Zaptel driver works OK and can tell if the TDM card is compatible? That way, if an FXO module is not reporting an incoming call, we'd know it's because of the Zaptel driver, and not something elsewhere. Are "dmesg",

Hi, I'm experiencing an issue with my x86_64 machine containing a Hauppauge PVR-500 (ivtv) and a Digium TDM400p (wctdm, part of zaptel) PCI cards. Independently of each other both cards work fine, but once the wctdm driver is loaded and mythtv tries to record something on the PVR-500 the wctdm driver freaks out. The error message is see is "TDM PCI Master abort" printed over and

I just installed an FXS module onto a 4 channel tdm thats about 5 years old and it wont work. Running dmesg I can see the following error: Zapata Telephony Interface Registered on major 196 Freshmaker version: 71 Freshmaker passed register test !!!!!!! LOOP_CLOSE_TRES iREG 1C = 1 should be 1000 !!!!!!! RING_TRIP_TRES iREG 1D = 8000 should be 3600 !!!!!!! COMMON_MIN_TRES iREG 1E = 0 should

Hi all, I'm trying to get a junghanns QuadBRI to coexist in the same machine as a Digium TDM400P card (so I can run the ISDN lines in and bridge with analog phones plugged into the TDM). I'm having a problem loading the modules. If I follow the BRIstuff (0.3.0-pre-1l) install method.... it's to modprobe zaptel, then insmod qozap.o I'm on Debian 2.4.31. That works. But then I

The TDM01B is 4 port capable but has only 1 FXO module. I'm running asterisk 1.2.7 and zaptel 1.2.5. I cannot seem to get the TDM01B working. When I do the zttool it shows 4/1/0. I can dial out from a POTS phone up to the point that the cable plugs into the card. Here is my /etc/zaptel.conf loadzone=us fxsks=1 and here is my /etc/Zapata.conf [channels] language=en #include

Hello I am struggling to get my TDM04B working. Just to rule out a hardware problem how can I check that the hardware works? How can I then check that the drivers are loaded correctly? Angus -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050620/470458c6/attachment.htm

I have read thru what other users have tried in this list when they have experienced seemingly similar issues to what I have, without success. I suspect there might be an issue regarding both the X100P and TDM04b cards being used in an Intel SE7525GP2 motherboard, as I had to even wait for a BIOS update from Intel in order to utilize my 3ware 9500 SATA raid controller on it (3ware Kb -->

Hello, I saw some conversation about this in the archives, but nothing definitive. If a call comes in over a CO line via the TDM400P, the Comedian Mail recording volume is so low it's inaudible. Calls coming in via SIP or IAX do not have this problem. Does anyone have any information on this issue? Thanks, Adam The contents of this email message and any attachments are confidential and

Hi, Some weird problem (or I'm too sleepy) happens with a tdm04B revision G (4fxo) Steps: modprobe zaptel modprobe wctdm ztcfg -vv /etc/zaptel.conf fxsls=1-4 # TDM04B defaultzone=us loadzone=us /etc/asterisk/zapata.conf signalling=fxs_ls group=1 context=incoming channel => 1-4 modprobe zaptel and wctdm load fine, however ztcfg -vv shows: 0 channels configured Im using centos 4.4 with

I noticed the following came into cvs head yesterday: > Update of /usr/cvsroot/zaptel > In directory mongoose.digium.com:/tmp/cvs-serv2118 > > Modified Files: > fxotune.c wctdm.c wctdm.h > Log Message: > More TDM card echo API modifications. Making the fxotune program automatically > find the correct coefficients for the module. Lots of neat stuff. I did a complete

Hi all i need urgent help our entire switchboard is down only 5 days after it came up. this is the second time this has happened and i am thinking that asterisk is not worth the trouble it gives. mostly it runs without hassle. but around 2 weeks ago during the test phase we rebooted the machine and did the normal modprobes and this error popped up. coming back to work after the weekend the

Hello I am (attempting) to run the astlinux version of Asterisk on a VIA embedded platform. I have a TDM04B and pretty sure zaptel.conf and zapata.conf setup OK. They worked fine with same card in traditional PC anyway. I think need the module wcfxs for a Digium TDM04B card. Is this module not part of astlinux? Do I need to download it? Or is it in opt? I see wctdm - but think that is

System: RHv9 cvs-head-11/23/04 with TDM04B and T100P (isdn pri). We've all seen many posts over the last several months regarding the stability of the TDM card. Today, the above system's TDM04B card (4 fxo ports) failed at approx 15:54:49. [root@asterisk asterisk]# cat /proc/zaptel/2 Span 2: WCTDM/0 "Wildcard TDM400P REV E/F Board 1" 25 WCTDM/0/0 FXSKS (In use)

> > First, ensure the TDM card has been defined to match the telephony > standards for each country where the card is installed. Bad echo on these outside North America is likely to be because of impedance mismatch. Echo cancel isn't likely to properly fix it. I was surprised at the lack of info about setting up the TDM cards for various countries. I eventually worked it out from a

OK, last showstopper that I just can't puzzle my way through - parking calls with the snom phones. I get the two phones connected, I hit transfer on one, the other phone goes to MOH and the first phone gives me DT, so I dial 700 and hit the OK button. Call transferred, the SNOM hangs up before I have a chance to hear which extension it parked to. Is there a way to make the SNOM phones

I am having trouble with chan_zap.so not loading. When I load it from modules.conf, Asterisk bails out without any error message. When I load it from the console, it just says "Unable to load module chan_zap.so" no matter what verbose level I am using. dmesg says: Zaptel Version: 1.4.4 Zaptel Echo Canceller: MG2 Freshmaker version: 73 Freshmaker passed register test Module 0:

Greetings, I have a server I'm working on here with two tdm cards in it. 4 FXS and 4FX0. Both cards work fine on their own. The problem lies with using both in the system at once. I have verified the IRQ's are fine. I have tried switching the slots the cards reside in, no luck though. I am using ACPI but not APM. I am using gentoo latest, with vanilla 2.6(.10) kernel and udev. CVS as of

I have a TDM400. Just updated Fedora 12 to kernel 2.6.32. Rebuilt and installed dahdi-2.2.1. kernel modules loaded. lsmod | grep wctdm wctdm 37233 0 dahdi 194985 1 wctdm lsmod | grep dahdi dahdi 194985 1 wctdm crc_ccitt 1549 2 dahdi,isdnhdlc dmesg: dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.2.1

I have an Asterisk@Home 1.3 server (Asterisk 1.0.9) and recently added a TDM400P with (1) FXO card on port 4. Inbound calls are always successful but outbound calls fail 75% of the time with intercept messages from my dial tone provider that include "we're sorry, your call did not go through", and "we're sorry, when placing a local call it is now necessary to dial an area