similar to: Avaya 4620 hardphone

Does anybody know if Avaya has a test SIP firmware available for 4620 and 4640 IP phones? The 46xx SIP image from their website is a combo download with SIP for the 4602, and h323 for the the 4620 and 4640. It looks like they demo'd a SIP image for the 4640 as far back as 2004: http://www.sip.org/von/2004/boston/slides/DSC_0042.php Thanks, Andy -------------- next part -------------- An

Hi all, I've been pulling my hair out for two days over this problem... I did *a lot* of Googling around, I searched the list archives to no avail - no one has the same problem! I have two Avaya 4610sw phones. I installed the latest SIP firmware using the TFTP server. So far everything looks good. Each time the phone boots, it retrieves the 46xxsettings.txt from the TFTP server. My problem

I'm using the latest SIP firmware from Avaya. The phone receives the 46xxsettings.txt OK, and then after entering extension and password it goes to the home screen saying 'Registering'. When I check options->ViewIPSettings->IPAddresses on the phone, the registrar and SIP Proxy fields are blank. I have both lines: SET SIPREGISTRAR "67.1XX.XX.XX" and SET

Does anyone Know if tha avaya 4621 IP phone work wiht asteisk? if it work it has featuras working Thanks Ignacio -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051014/d3a65784/attachment.htm

Hi, I am trying to use an Avaya 4602 phone, which I just updated from a very old SIP software to the latest I could find on avaya's site (032207). The upgrade went fine and it gets registered on the Asterisk server. Now, a couple of glitches, though. - The phone's web server is not working ... so I have no easy way to configure it. It used to work with the old release of the software. I

After downloading the firmware from a tftp server for avaya 4602 ip phone, my phone console keeps getting message saying contacting http server. according to this link: http://voip-info.org/wiki-Avaya+4602+configuration My phone hangs at "Contacting HTTP Server" while performing a firmware update Either your phone cannot download the sip_4602D01A.txt file (in which case it will

The company I work for has deployed an Avaya IP phone system. They have deployed the Avaya 4602 and 4620 IP telephones. They might be sending me one of these phones for use in my home office. Question: Can I make this IP telephone register and work with my Asterisk server? I don't know if it is a SIP phone? I searched thru the Avaya site, but can't find whether it's a SIP phone or

Thanks for the reply John. About 85-90% of what this box has to do is just handle calls, but it also has options to transfer calls to the main phone system, which up to now has been another asterisk box. For example, you can hit 6 to be transferred to the Lost & Found Department. I do have allowguest set to “yes” already, but of course I also have type=peer and the other stuff for a sip

I'd like to start configuring my Avaya 9608G phones for use on Asterisk / FreePBX / PBX-In-a-Flash. I'm using a variety of other phones on my system without major issues. I've read the discussion back in March, May and August of 2016, but unfortunately, my difficulty is much more basic. I think it has to do with DHCP, specifically, what options I'm offering the phone via DHCP.

Hello all, I hope someone can help me with this old Asterisk version. I have to run this version because of a custom IVR written on it. Porting it would take much too long and we'd have to hire a consultant because of all the hooks it has into Oracle databases and real-time information. We have a brand-new Avaya phone system in place and we will be cutting over to it in late March 2019.

Hello, I'm trying to create a H.323 trunk between Asterisk 11 and Avaya. I have done this before between Asterisk 1.6 and Avaya but had some issues placing external calls from the Asterisk to the Public network which is connected to Avaya. I'm trying to create that trunk on Asterisk 11 because the 1.6 is outdated and has no support. On the Asterisk side I have Aastra 6731i SIP phones

I'm trying to connect an Asterisk system to an Avaya Partner ACS R6 system. The problem I'm having is that I cannot get the partner system to get CallerID over the T1 modlue. The partner is using the T1 with E & M signalling (which I don't think can be changed), and whatever I tried didn't work. My only option right now is to get FXS ports on the Avaya side plugged into the

Hi * Users, I ran into a problem when I was trying to communicate an avaya IP Office talk to asterisk with SIP Trunking. I had successful calls from asterisk to Avaya but not from avaya to asterisk. Can someone provide me insight on how to address it or the path to resolve it. The error I get is mentioned below: (dialing 32564 from avaya to asterisk) "[Nov 6 17:14:23]

Hi ! I am trying to connect Asterisk with Avaya Definity. I use this tutorial to do this http://cyril-constantin.blogspot.com/2008/04/howto-connect-avaya-to-asterisk.html The comunication between avaya and asterisk is fine but without sound. I can call from Asterisk to Avaya and extension ring or Avaya to Asterisk and extension ring too but I cant hear anything Example Asterisk ---> Avaya --

Hi All, I need help with integrating AVAYA 8300, the avaya can do outbound calls but cannot do inbound calls, im sending calls from sip to avaya using E1 ISDN line. My config was based on aspect dialer it's working with aspect but not with avaya. My config and error is below. zaptel.conf span=1,1,1,ccs,hdb3 bchan=1-15,17-31 dchan=16 zapata.conf group=0 context=avaya switchtype=euroisdn

Hi * Users, I ran into a problem when I was trying to communicate an avaya IP Office talk to asterisk with SIP Trunking. I had successful calls from asterisk to Avaya but not from avaya to asterisk. Can someone provide me insight on how to address it or the path to resolve it. The error I get is mentioned below: (dialing 32564 from avaya to asterisk) "[Nov 6 17:14:23] WARNING[6227]:

So far I have not found a way that I can register the Avaya phone with Asterisk. From what I have found so far is that Avaya phone needs the Avaya Media Server and Avaya Gateway. Looking at the h.323.conf (in Asterisk) and the file 46xxsettings.txt (avaya file located in tftpboot) there are no settings to make the phone initialize. I have sent an email to the Asterisk Users Mailing List to see

Hi, I'm trying to integrate my asterisk PBX to an Avaya PBX. I am using chan_ooh323 from asterisk-addons. I am able to make a call from SIP Phone -> Asterisk -> Avaya -> Station (phone) and vice versa. I am also able to make a call from SIP Phone -> Asterisk -> Avaya -> PSTN. However I face problems when I make DID calls from the PSTN. The DID calls are made through

Dear all I have Asterisk which is connected with avaya through E1 back 2 back now i have on asterisk side G.711 codec and Avaya also useing G.711 codec everything fine. I need G.729 on my asterisk side. can i have lots of SIP phone on my lan and issue is i have 2 to 3 building so problem is LAN is congested thats why i need G.729 Now testing perpose i have download

Hi List, I would like create a H323 trunk from Avaya IPOFFICE to Asterisk, but i would like activate a "direct media path" for the RTP transit directly between the phone and the Asterisk. Now, - H323 Trunk is OK - RTP from the phone transit directly to Asterisk (activate "strictrtp=no" in rtp.conf, and "Allow Direct Media Path" option in Avaya Ipoffice) H323: Phone