similar to: Sipura 2000 Dial Plan

We have a bunch of PAP2s, and using the # to send immediately does not work as described in the manual. The PAP still waits for the "Interdigit_Short_Timer" to expire before sending the dial string. In addition, the dialplan does not cause the string to be sent immediately as it should. Here's the dialplan I'm using:

Since the 3000 has been out for a little while, has anyone done a review of the product? (couldn't find anything on google for wiki). Can the fxo and fxs ports be used as two independent channels? Is it really read for prime time? Etc. Rich

Anyone have an example XML file for the PAP2T? Cheers, j

Hi there, We have plans to install an office (not call center) with the following setup: 200 linksys 942 phones (sip + g711) on a LAN a server with a dual port E1 sangoma and a remora card with 4 fxo modules. So far when we want to setup a linksys phone, we need to use the http interface of each phone, disable/enable a lot of things and plug it into the network. this is not the best scenario for

Not sure if this is the best place but does any one have any used IAXy's they are interested in selling? I am looking to pick one up cheap for a proof of concept before going all out on them. Also does any one have any real life practical experience with how well (or not so well) that these devices have worked for them? you can reply to me off list at asterisk@matraex.com Thanks Michael

I have an installation which is currenly using 14 DID Trunk Lines. I need to be able to use Caller ID information and currently it is not available on these lines. Is there another way to access this information? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040105/62559e22/attachment.htm

Does anyone know of a resource for extensions in which the server (whether asterisk or custom scripts) can trigger the phone to be answered? So for example an operator can have a headset and when a call comes through the call is automatically (through a script) connected to the headset instead of the operator having to manually answer the call. Any responses, help or ideas of a type of supplier

I have benn having trouble with the Monitor Command. Basically any time that I send a call into a MeetMe room I am only able to monitor half of the conversation. File-in is recorded with the incoming voice but file-out does NOT record anything. I have tried this with both the b and m option as well as without any options to the MeetMe command. Also the Monitor correctly records both sides of the

Does anyone know of a piece of hardware that can allow multiple earpices to be connected directly to a server running Asterisk. I hope I am not being to vague but basically I am looking to allow a call center to user the server to do all of the "Pickup" and "Hangup" functions. The operators will merely have to have th earpiece in their ear. I have seen serial pieces of

All: I am looking to install another asterisk server in an office located in a different part of the country. I think I can configure the sip and extension conf files, so that the internal phones at the two locations can call each other. My question is this, how do I properly configure the sip file for a different provider at the new location? Can I use a different register statement for

Hi, Is there IAX client in Applet JAVA which can be embeded in a web page ? Best regards Rattana -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031208/c388ef61/attachment.htm

Hello all, I am building a software based on asterisk to handle incoming answering service calls. I have one problem that I have not been able to figure out a reasonably priced solution to: The goal of this software is to allow the agent to be able to do their entire job from the desktop. The only thing that seems to be a problem is getting the operator (agents) headset logged on to the

I have a Sipura 2000 working fine, but whenever I dial any extension there is a delay of 5-10 seconds before it starts ringing. However, if I dial the extension and hit the pound key after the number, it goes through right away. Is there any way around this?

For years we've had the following simple context for outgoing calls: [outtrunk] ; match any NANP, and strip leading 1 off exten => _1XXXXXXXXXX,1,StripMSD,1 ; dial outbound on trunk group 1 exten => _XXXXXXXXXX,2,Dial,Zap/g1/${EXTEN} But when I upgraded on Friday to the latest CVSHEAD, this no longer works. If I send 13115552368 to this context, I get a message like pbx.c: Channel

I am writing a call center application. I do not want to use Queues to manage my incoming calls and connect them to the operators for a few reasons which I wont go into here. The option I come up with is to create a context that the call goes to which runs background() and just loops to play it again and again forever. The background() will have options to dial 1 to leave voicemail Then, when

I have two servers, each connected to the PTSN via PRI. When I call from site A (951-999-9999) to site B (555-1212) and the phone at site B is on the phone, I hear the normal ring tone for about 20 seconds, then the message "all circuits are busy now. please try your call again latter" followed by the congestion tone. Instead, I want this to busy ring and then hang up without any

I have been trying to figure a way to SendDTMF into a MeetMe room using the Manager API. I can't redirect everyone into another context and then bring them back because that would mess up my logic. I am trying to use local channels and the originate Action to accomplish this. Exten: 3441115 Priority: 1 ActionID: actid-00000001 Context: senddtmftones Action: Originate Channel:

I have an analog phone connected to a Sipura 2100 which in turn connecteds to * over a 100mbps LAN. When I do ChanSpy on a bridged call, it causes massive jitter. When I attempt ChanSpy with a Grandstream GXP-2000 the monitored call is clear. Has anyone had this happen? Any suggestions? ScriptHead

Hi, I''m using a custom block script in my xen setup and when started, it creates a new device node pointing to some network resources. Now I noticed that the script is called twice for the root block, the first time for pygrub most likely, but is only stopped once ... I don''t mind creating two devices node, but then I need to destroy both ... Is this a known issue ? Cheers,

I am trying implement two-stage dialing. Scenario is following: 1. * Dials SIP agent 2. SIP agent answer the phone and provide dial tone 3. * Sends DTMF string 4. "Bridge" channel with calling party I thought that something like: exten => _2XX,2,Dial_but_not_connect_(SIP/BYEXTENSION,10) exten => _2XX,3,Wait,1 exten => _2XX,4,SendDTMF($DTMF_DIGITS) Should do it. Thank